Question for AP Endowment AEE - Quiz / Questions / MCQ in English

Yojna a weekly journal

Kurukshetra a journal on rural development is published by

Devaluation of a currency means

In ruby laser, the stimulated emission is due to transition from

10^-6 M NaOH is diluted 100 times. The pH of the diluted base is

The respiratory quotient during cellular respiration would depend on

Which is the largest textile market in Andhra Pradesh ?

Which is the largest turmeric market in Andhra Pradesh ?

On what date did India celebrate the 9th anniversary of the Goods and Services Tax (GST) implementation?

Which global event is India participating in with Sweden as a partner?

I go to Madurai by —– Vaigai Express

Have the car stolen!

The payment was collected by the hardworking salesman.

I had to stop all my work to complete this project.

They have published the names of all the successful candidates.

The online shopping site lowered the prices.

Who taught you to drive a truck ?

We shall invite Suresh.

Dark clouds have overcast the evening sky.

The partners will celebrate their triumph tomorrow. 

What will be the depth of penetration of the plunger in Vicat Apparatus (IS : 5513 - 1976) from the bottom of the Vicat Mould, when the cement paste is tested for standard consistency, according to IS 4031 – 1988 ?

Two sewer pipelines A and B (having the same diameter and made of the same material) are laid at a bed slope of 1 in 225 and 1 in 625, respectively. Determine the ratio of their carrying capacities (Q_A to Q_B) .

Select the correct statement with respect to an over - reinforced cement concrete section under the working stress method .

A cantilever beam of span L is built - in at the support. It is restrained against lateral deflection and torsion at the free end. The effective length of compression flange for the beam as per IS 800 : 2007 is

What is the principle of plane surveying ?

According is IS 5968 : 1987, the minimum radius of radius of curve to be provided in the alignment of unlined canals carrying a discharge of less than 30 cumecs up to 15 cumecs is :

A Pelton wheel is to be designed for a pitch diameter of 1 m and jet diameter of 0.1 m. The number of buckets on the runner computed by Taygun’s formula is :

What is the effect of fly ash in concrete ?

As per IS 456 : 2000, the minimum grade of concrete to be used for plain concrete and reinforced concrete, respectively, in concrete works exposed directly along the sea coast are :

Identify the property that changes as a function of the geometrical dimensions of a section in structural materials :

As per IRC (Indian Roads Congress) recommendation, what will be the designed stopping sight distance (in metres) at the vehicle speed of 80 km/h on a rural highway ?

No deduction is made in the quantity estimation for plastering work in cement mortar for openings having size up to :

What is the height of slump cone mould used for testing the workability of the concrete ?

Select the correct option with regard in the following statements (S1, S2) pertaining to pavements .
S1 : Present serviceability index is used for the functional evaluation of pavement surface condition
S2 : Rigid pavements are less affected by temperature variations than flexible pavements

If the quadrantal bearing of a line AB is S 31'35' E, then its whole circle bearing is equal in :

The overflowing sheet of water on a weir is called :

According to IS 456 - 2000, what is the slump of a medium degree of workability of concrete if planed in heavily reinforced sections like slabs, beams, walls, columns ?

Which of the following is Kharif season in India ?

The estimated value of a built - up property at the end of its useful life without dismantled is called :

The amount of cement required for 100 m² area, of damp proof course with 2.5 cm thinkness, in with proportion of 1: 2 : 4 (cement : sand : aggregate) will be :

Select the correct statement related to increasing the carbon content in steel from 0.2 to 0.9 percent .

Which of the following laws states that pressure or intensity of pressure at a point is static fluid is equal in all directions ?

The determination of plasticity index and the percentage by weight of clay mineral finer than 2 µ present in the soil were done for two soil samples A and B. The ratio of plasticity index to the percentage of clay size particle for the samples A and B are given in the table .
Soil sample      Ratio of plasticity index to percentage of clay size particle
Sample A          Less than 0.75
Sample B          Greater than 1.25 The two soil sample A and B are classified as

Which of the following compounds of cement is responsible for early strength ?

According to SP : 27 - 1984, the thickness of slab or RC slab shall be measured to the nearest of :

Classify the following pollutants as primary pollutants (PP) and secondary pollutants (SP). Ozone, Carbon monoxide, Particulate matter, photochemical smog, Nitrogen oxides, Aerosol/mist, Hydrocarbons, Perory - Acetyl - Nitrate, Sulphur dioxide.

Saturated unit weight of soil is the ratio of : 

Identify the test to be conducted for the determination of the modulus of subgrade reaction in pavement design .

In limit state design, the design bond stress for deformed bars (conforming to IS 1786) for M20 concrete mentioned in IS 456 : 2000 is (in N/mm² units) :

Which of the following can be considered as a taking off point in road planning in India ?

The following two statements pertain to a simply supported under reinforced concrete beam. Select the correct option with regard is these statements .
1. The failure of the beam takes place due to the yielding of steel .
2. The moment of resistance of the beam is more than that of the balanced section of the beam .

A continuous beam ABC with span AB = BC = L is shown in the figure. Support A is fixed type, and supports B and C are roller type. The kinematic indeterminacy of the beam is :

The soils transported and deposited by a river or a stream care called :

What is the mechanical extra widening required for a two-lane pavement of width 7 m on a horizontal curve of radius 250 m, if the longest wheel base of a vehicle expected on the road is 5 m with a design speed of 70 km/h ?

The following are some of the errors that area associated with a total station survey work. Vertical collimation error, Centering error, Horizontal collimation error, Eccentricity error Categorize the given errors as those due to temporary adjustments (T) and permanent adjustments (P).

According to IS 800 : 2007, identify the property which is considered as a mechanical property of structural steel, important in design .

Which of the following methods is NOT used for measuring air content in fresh concrete ?

Which of the following methods is NOT used for the calculation of depreciation of a structure ?

The failure of an over reinforced concrete beam is due to :

In which type of estimate is 'Court yard' NOT considered ?

Match the items in List 1 (name of quantities) with those in List 2 (unit of quantities in the SI system). Use codes in List for matching .
​ List 1                                   List 2
M. Dynamic viscosity         1. N/m
N. Kinematic viscosity        2. N.m
O. Surface tension             3. N.s/m²
P. Energy                            4. m²/s

A reinforced concrete beam is subjected to the following bending moments .
Moment due to dead load = 50 kNm
Moment due to live load = 50 kNm
Moment due to seismic load = 20 kNm
The design bending moment for limit state of collapse is :

In a workshop shade, trusses are spaced at 4 m centre to centre. The purlins are spaced at 1.4 m centre to centre along the slope of 30⁰. The (Dead Load + Live load) is 3 kNm² and the wind load in 5 kNm². The vertical and the inclined point loads, respectively, will be :

What will be the percentage of passing aggregate for the grading zone 1 of sieve size 1.18 mm ?

The annual or periodical payment for repayment of the capital amount invested on a property for a specified period is known as :

Among the following river training works, which are aligned either parallel or at an angle to the banks, identify the one having a difference in alignment when compared to others :

The test commonly to determine the grade of bitumen in terms of its hardness is :

A level section has formation width of 10 m, side slope of 1 : 2 (vertical : horizontal) and central height of 2 m. Determine the quantity of earthwork required for a 1 km length of formation (in m³) .

Which type of odour characteristic is NOT used for classifying odour of a given water sample as per IS 3025 (part-5) 1983 ?

The liquid limit and plastic limit of clay materials is 45% and 25% respectively, what is the activity of clay materials if 20% by weight of particles of size less than 2 microns ?

Among the following corrections applied for tape measurement, identify the correction which is NOT always negative in sign :

A village has a population of 200 with as average rate of water demand as 100 litre per capita per day. A rapid sand filter having an average filtration rate of 100 litre/hour/m² is to be designed for water treatment. The area of rapid sand filter required is : (Take the ratio of maximum demand to average demand as 1.5.)

If the bearing of the side AB of a regular hexagon traverse ABCDFFA shown in the figure is 36^o45', the bearing of the adjacent side BC of the traverse is :

​

Pigment volume concentration (PVC) of paint is defined as :

The Indian Roads Congress (IRC) was founded in the year :

In a leveling survey work, the first staff reading taken in a staff station after shifting the instrument and the last staff reading taken to a staff sation before the instrument in shifted are, respectively :

Which of the following Indian Standard Codes provides conservatively imposed loads for buildings and structures ?

Activity of soil is ratio of the plasticity index to :

Kor watering in irrigation is defined as :

What is a SI unit for dynamic viscosity ?

Arrange the following building materials in the increasing order of density of materials .
Granite, Steel, River sand, Water

The bearing of a line AB is 150^o15' and the angle ABC between line AB and BC is 110^o30' as shown in the given figure .



What is the bearing of line BC ?

Select the correct statement with respect to a slow sand filter :

What will be the carrying capacity of a horizontal rectangular channel 4 m wide, conveying a discharge of 1 cumecs per meter width of channel ?

Select the correct option with regard to the following statements (S1, S2) pertaining to consolidation in soils :
S1: A soil is termed as normally consolidated, if the present effective orver burden pressure is less than maximum to which the soil was ever been subjected to in the past .
S2: The large the value of co - efficient of consolidation, the shorter it takes for full consolidation to occur .

A real fluid in which the shear stress is directly proportional to the velocity gradient is known as :

An airport runway fill needs 8,50,000 m³ of soil compacted to void ratio of 0.7. The required soil is to be taken from a borrow pit having an in situ void ratio of 0.8. If the transportation cost is Rs.10 per m³, estimated cost for the filling work is (in Rs.) :

If p is internal pressure, d is diameter and t is thickness of wall for a thin cylindrical shell, then the value of hoop stress will be :

As per IS 800 : 2007, in the design of beams/plate girders, when the web of a member acting alone is inadequate, different types of stiffeners are provided. Match the type of stiffeners provided in List 1 with the requirement to be satisfied by them in List 2 .
(Use the Code in the lists for matching)
​List 1                                                                               List 2
​B. Intermediate transverse wed stiffener         1. Provide local reinforcement to wed under shear and bearing
C. Load carrying stiffiener                                2. Improve the buckling strength of a slender Web due to shear
D. Bearing stiffener                                          3. Prevent local buckling of web due to concentrated loading
E. Diagonal stiffener                                        4. Prevent local crushing of web due to concentrated loading

A canal was designed for a full supply discharge of 60 cumee. The average supply discharge in the canal is 40 cumee. The capacity factor of the cannal is :

Sewers must be checked for minimum velocities at their minimum hourly flows which is equal to :

What is the permissible limit of organic mater present in water for mixing concrete as per IS 456 - 2000 ?

A horizontal pipeline AB of diameter d cpmveus water, flowing from A to B. The U - tube manometer with mercury as manometric liquid can be used for the measurement of :

A cantilever of beam span l is fixed at one end, the other end resting freely on the middle of a simply supported cross-beam of the same span and section. If the cantilever beam is now loaded with a uniform load of w per unit length, find the reaction at the free end offered by the cross beam.

Select the INCORRECT obstacle in chaining in a chain survey:

The basis for classification of ordinary Portland cement (OPC) as grade 33, 43 and 53 as per IS 10262 is :

The mass of a chunk of moist soil is 20 kg and its dry density is 1500 kg/m³. What is the void ratio of the soil if the specific gravity is 2.50 and density of water is 10000 kg/m³

The maximum effective slenderness ratio for the compression flange of a steel beam against lateral torsional bucking as per IS 800 - 2007 is :

As old building has a future life of 15 years. The rate of interest on capital is 7%. If the coefficient of annual sinking fund is 0.43, then what will be value of year's purchase?

The value used for the prevention of reversal of flow in a pipeline is :