Kurukshetra a journal on rural development is published by
A
Ministry of Finance
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 3Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 4Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
1. a large number of farmers are illiterate and know little about scientific agriculture
2. prices of primary products are lower than those of manufactured products
3. Investments in agriculture has been low when compared to investment in industry
A
1 and 3
B
2 and 3
C
1 and 2
D
1,2 and 3
Question 5Single Answer
Which of the following programmes aims at the promotion of savings among rural women
A
Rashtriya Mahila Kosh
B
Indira Mahila Yojna
C
Jawahar Rozgar Yojna
D
Mahila Samridhi Yojna
Question 6Single Answer
What is Net National Product
A
the money value of final goods and services produced annually in the economy
B
the money value of annual service generation in the economy
C
the money value of tangible goods produced annually in the economy
D
The money value of tangible goods available in the economy
Question 7Single Answer
National income is the
A
net national product at market price
B
net national product at factor cost
C
net domestic product at market price
D
net domestic product at factor cost
Question 8Single Answer
Chelliah Committee of 1992 deals with the overhauling of our
A
financial system
B
tax system
C
patents and copyrights
D
Public sector undertakings
Question 9Single Answer
During which Five Year Plan was the annual growth rate of National Income the lowest
A
2nd plan
B
3rd plan
C
5th plan
D
6th plan
Question 10Single Answer
Which of the following taxes is a progressive tax
A
sales tax
B
custom tax
C
excise tax
D
income tax
Question 11Single Answer
I go to Madurai by —– Vaigai Express
A
a
B
an
C
some
D
the
Question 12Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 13Single Answer
The payment was collected by the hardworking salesman.
A
The hardworking salesman collected the payment.
B
the salesman who worked heard was able to collect the payment.
C
to collect the payment the salesman had to work hard.
D
The hardworking salesman was able to collect the payment.
Question 14Single Answer
I had to stop all my work to complete this project.
A
All other work had to be stopped to complete this project by me
B
For completing this project all other work must be stopped
C
For completing this project I had to stop all my work
D
To complete this project all other work had been stopped by me
Question 15Single Answer
Passage :
Direction : Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has ……………a centralized online databank system for all statutory government bodies to …………an eye on their assets and liabilities.
A
presented , stay
B
introduced , keep
C
announce , make
D
created , let
E
proclaimed , hold
Question 16Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
A
liabilities
B
responsibilities
C
estates
D
profits
Question 17Single Answer
Passage :
Direction : In the question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Affidavit
A
Affirmation
B
Slander
C
Oath
D
Testimony
Question 18Single Answer
Passage :
Direction: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Hollow
A
Alveolate
B
Cleft
C
Cavernous
D
Solid
Question 19Single Answer
Passage :
Directions: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Cosset
A
Ignoreb
B
Close
C
Caress
D
Fondle
Question 20Single Answer
Passage :
Directions: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Ogle
A
Leer
B
Gaze
C
Ignore
D
Gawk
Question 21Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 22Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 23Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 24Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 25Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 26Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
A
X
B
W
C
I
D
H
Question 27Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
A
SUM
B
BIG
C
Both BIG and THE
D
FOR
E
Both FOR and BIG
Question 28Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be second from the right ?
A
AND
B
FOR
C
THE
D
BIG
E
SUM
Question 29Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If second alphabet in each of the words is changed to next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed ?
A
None
B
One
C
Two
D
Three
E
Four
Question 30Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
How many letters are there in the English alphabetical series between the second letter of the word which is second from the right and the second letter of the word which is second from the left of the given words?
A
Two
B
Five
C
Six
D
Nine
E
Three
Question 31Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If in each of the given words, each of the consonant is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will no vowels appear?
A
None
B
One
C
Two
D
Three
E
More than three
Question 32Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the third alphabet in each of the words is changed to the next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed?
A
None
B
One
C
Two
D
Three
E
Four
Question 33Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 34Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 35Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 36Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 37Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 38Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 39Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 40Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 41Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 42Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Question 43Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 44Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 45Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 46Single Answer
Which day is observed on October 1, 2025 to promote elderly care and respect?
A
World Heart Day
B
International Day of Older Persons
C
World Habitat Day
D
International Coffee Day
Question 47Single Answer
Which international day is observed on October 1, 2025 to raise awareness about habitat and urban issues?
A
World Habitat Day
B
World Animal Day
C
International Day of Non-Violence
D
World Teachers' Day
Question 48Single Answer
India's first indigenous 5G mmWave module was developed by which organization on October 1, 2025?
A
DRDO
B
C-DOT
C
BEL
D
ISRO
Question 49Single Answer
The "PM Vishwakarma Scheme" was launched on October 1, 2025, targeting which group?
A
Farmers
B
Artisans and craftsmen
C
Students
D
Senior citizens
Question 50Single Answer
Which international day is observed on October 1, 2025, to honor Mahatma Gandhi?
A
Gandhi Jayanti
B
International Day of Non-Violence
C
World Peace Day
D
Human Rights Day
Important Questions Package
BEL Technician Exam Online Question Bank Package
Buy BEL Technician Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BEL Technician question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
BEL Technician Exam (Fitter) - Hindi
Description : 1000 Question with Answer
₹101[₹500]
2.
BEL Technician Exam (Fitter) - Hindi
Description : 2000 Question with Answer
₹151[₹500]
3.
BEL Technician Exam (Fitter) - English
Description : 1000 Question with Answer
₹101[₹500]
4.
BEL Technician Exam (Fitter) - English
Description : 2000 Question with Answer
₹151[₹500]
5.
BEL Technician Exam (Fitter) - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹560[₹650]
6.
BEL Technician Exam (Fitter) - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
7.
BEL Technician Exam (Fitter) Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
8.
BEL Technician Exam (Fitter) Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
9.
BEL Technician Exam (Electronics Mechanic) - English (Old)
Description : 1000 Question with Answer
₹101[₹500]
10.
BEL Technician Exam (Electronics) - English (Old)
Description : 5000 Question with Answer
₹221[₹500]
Technical Aptitude (Fitter)
Question 51Single Answer
Which tool is used to cut external threads?
A
Die
B
Tap
C
Chisel
D
Reamer
Question 52Single Answer
What is the purpose of a reamer?
A
Cutting threads
B
Finishing holes
C
Cutting grooves
D
Sharpening tools
Question 53Single Answer
A hacksaw is used for:
A
Cutting metal
B
Cutting wood
C
Drilling
D
Filing
Question 54Single Answer
What is the function of a centre punch?
A
Marking the centre of a hole before drilling
B
Cutting threads
C
Scraping metal
D
Smoothing surfaces
Question 55Single Answer
The term "pitch" in threads refers to:
A
The diameter of the thread
B
The distance between adjacent threads
C
The depth of the thread
D
The material of the thread
Question 56Single Answer
Which tool is used for making internal threads?
A
Tap
B
Die
C
File
D
Drill
Question 57Single Answer
A bench vice is used for:
A
Holding workpieces
B
Cutting metal
C
Drilling holes
D
Measuring dimensions
Question 58Single Answer
Which material is commonly used for making cutting tools?
A
Mild steel
B
High-speed steel
C
Copper
D
Aluminium
Question 59Single Answer
Which file is used for rough filing?
A
Smooth file
B
Bastard file
C
Dead smooth file
D
Half-round file
Question 60Single Answer
Which of the following is used for checking the flatness of a surface?
A
Surface plate
B
Try square
C
Caliper
D
Micrometer
Question 61Single Answer
A micrometer measures in:
A
Millimeters
B
Microns
C
Centimeters
D
Inches
Question 62Single Answer
A scriber is used for:
A
Cutting threads
B
Marking lines on metal surfaces
C
Drilling holes
D
Cutting metal
Question 63Single Answer
What does the term "clearance fit" refer to?
A
A fit where parts are press-fitted
B
A fit where there is a small gap between parts
C
A fit where parts are interference-fitted
D
A fit where parts do not come into contact
Question 64Single Answer
Which of the following is a marking tool?
A
Chisel
B
File
C
Scriber
D
Reamer
Question 65Single Answer
A vernier caliper is used for measuring:
A
Lengths
B
Angles
C
Surface roughness
D
Thread pitch
Question 66Single Answer
A tap wrench is used for:
A
Drilling holes
B
Holding taps
C
Cutting threads
D
Filing
Question 67Single Answer
Which type of file is used for finishing curved surfaces?
A
Flat file
B
Round file
C
Half-round file
D
Triangular file
Question 68Single Answer
In a micrometer, the thimble rotates around the:
A
Spindle
B
Anvil
C
Frame
D
Sleeve
Question 69Single Answer
Which part of a micrometer holds the object being measured?
A
Spindle
B
Anvil
C
Sleeve
D
Thimble
Question 70Single Answer
What is the primary purpose of a surface gauge?
A
Checking the depth of a hole
B
Marking out lines parallel to a reference surface
C
Measuring diameters
D
Cutting grooves
Question 71Single Answer
The hardness of a file is measured in terms of:
A
HRC
B
BHN
C
Vickers
D
Mohs scale
Question 72Single Answer
A feeler gauge is used to measure:
A
Thickness of gaps
B
Diameter of holes
C
Angle of a surface
D
Depth of grooves
Question 73Single Answer
In a fitting shop, what is the purpose of a prick punch?
A
Light marking of drill centers
B
Heavy marking for chiseling
C
Rough filing
D
Thread cutting
Question 74Single Answer
What is the advantage of using a Vernier height gauge?
A
Measuring large heights accurately
B
Checking thread depth
C
Measuring thread pitch
D
Measuring the internal diameter of holes
Question 75Single Answer
A hand reamer is used for:
A
Enlarging existing holes
B
Tapping threads
C
Cutting new holes
D
Grinding surfaces
Question 76Single Answer
Which part of the hacksaw holds the blade?
A
Frame
B
Handle
C
Teeth
D
Nose
Question 77Single Answer
A surface plate is primarily used for:
A
Grinding surfaces
B
Holding workpieces
C
Checking flatness
D
Cutting threads
Question 78Single Answer
What is the main purpose of using an engineer’s square?
A
Checking angles
B
Measuring lengths
C
Cutting grooves
D
Marking drill points
Question 79Single Answer
Which type of tap is used for the final finishing of threads?
A
Bottoming tap
B
Taper tap
C
Plug tap
D
Hand tap
Question 80Single Answer
Which tool is used to deburr sharp edges after drilling or cutting?
A
Scraper
B
File
C
Chisel
D
Tap
Question 81Single Answer
What is the primary function of dividers in marking off?
A
Measuring and transferring distances
B
Cutting metal
C
Drilling holes
D
Filing surfaces
Question 82Single Answer
What material is commonly used for making dividers?
A
Aluminum
B
Hardened steel
C
Plastic
D
Wood
Question 83Single Answer
How should dividers be maintained to ensure accuracy?
A
Store in a humid environment
B
Apply heavy grease
C
Keep points sharp and clean
D
Leave in direct sunlight
Question 84Single Answer
What is a scribing block used for?
A
Marking lines parallel to a surface
B
Measuring angles
C
Cutting sheet metal
D
Drilling holes
Question 85Single Answer
What is the main component of a scribing block?
A
Blade
B
Scribe needle
C
Hammer
D
Protractor
Question 86Single Answer
What type of dividers are used for precise measurements?
A
Wing dividers
B
Spring dividers
C
Straight dividers
D
Flat dividers
Question 87Single Answer
How should a scribing block be stored?
A
In a damp place
B
Exposed to dust
C
In a protective case
D
Submerged in water
Question 88Single Answer
What is the classification of dividers based on their design?
A
Heavy and light
B
Single and double
C
Long and short
D
Fixed and adjustable
Question 89Single Answer
What care should be taken for dividers to prevent rust?
A
Use sandpaper
B
Store in water
C
Apply oil lightly
D
Heat regularly
Question 90Single Answer
What is the purpose of a surface plate in marking off?
A
Providing a flat reference surface
B
Cutting metal
C
Measuring angles
D
Drilling holes
Question 91Single Answer
What is the primary use of a try square?
A
Checking perpendicularity
B
Measuring lengths
C
Drilling holes
D
Cutting metal
Question 92Single Answer
What material is a try square blade typically made of?
A
Plastic
B
Hardened steel
C
Wood
D
Aluminum
Question 93Single Answer
How should a try square be maintained?
A
Store in a humid environment
B
Bend the blade slightly
C
Apply heavy grease
D
Keep blade clean and free of burrs
Question 94Single Answer
What is the function of an ordinary depth gauge?
A
Measuring angles
B
Cutting metal
C
Measuring depth of holes or recesses
D
Marking lines
Question 95Single Answer
What is the typical accuracy of a protractor?
A
10 degrees
B
0.1 degree
C
5 degrees
D
1 degree
Question 96Single Answer
How should a protractor be stored to prevent damage?
A
In a protective cover
B
In a toolbox with other tools
C
Exposed to moisture
D
In direct sunlight
Question 97Single Answer
What is the main use of a protractor in a workshop?
A
Measuring lengths
B
Drilling holes
C
Measuring angles
D
Filing surfaces
Question 98Single Answer
What is the primary component of an ordinary depth gauge?
A
Depth bar
B
Vernier scale
C
Blade
D
Protractor
Question 99Single Answer
How should a try square be checked for accuracy?
A
Compare with a known 90-degree angle
B
Bend the blade
C
Submerge in water
D
Heat the blade
Question 100Single Answer
What is the purpose of a protractor’s scale?
A
Measuring depth
B
Measuring angles
C
Measuring length
D
Cutting metal
Question 101Single Answer
What is the primary use of a cold chisel?
A
Measuring lengths
B
Drilling holes
C
Cutting or chipping metal
D
Filing surfaces
Question 102Single Answer
What material is commonly used for cold chisels?
A
Aluminum
B
Wood
C
Plastic
D
High carbon steel
Question 103Single Answer
What is the typical cutting angle of a cold chisel?
A
30°
B
45°
C
90°
D
60°
Question 104Single Answer
What type of cold chisel is used for cutting grooves?
A
Cross-cut chisel
B
Flat chisel
C
Round nose chisel
D
Diamond point chisel
Question 105Single Answer
How should cold chisels be maintained to prevent damage?
A
Store in water
B
Use for prying
C
Keep cutting edge sharp and oiled
D
Heat regularly
Question 106Single Answer
What is the purpose of a diamond point chisel?
A
Cutting flat surfaces
B
Cutting V-shaped grooves
C
Cutting round holes
D
Measuring angles
Question 107Single Answer
What care should be taken when using a cold chisel?
A
Strike with a wooden hammer
B
Store in a humid environment
C
Use without a hammer
D
Wear safety goggles
Question 108Single Answer
What type of cold chisel is used for cutting keyways?
A
Flat chisel
B
Cross-cut chisel
C
Diamond point chisel
D
Round nose chisel
Question 109Single Answer
What is the cutting angle for a cold chisel used on soft metals?
A
30°
B
45°
C
60°
D
70°
Question 110Single Answer
How should a damaged cold chisel be handled?
A
Continue using it
B
Store in water
C
Discard immediately
D
Grind to restore cutting edge
Question 111Single Answer
What is the primary function of a power saw?
A
Cutting metal or wood
B
Drilling holes
C
Measuring lengths
D
Filing surfaces
Question 112Single Answer
What type of blade is used in a band saw?
A
Circular blade
B
Reciprocating blade
C
Straight blade
D
Continuous loop blade
Question 113Single Answer
What is the main advantage of a circular saw?
A
High precision for straight cuts
B
Slow cutting speed
C
Used for drilling
D
Low power consumption
Question 114Single Answer
What material is a band saw blade typically made of?
A
High-speed steel
B
Aluminum
C
Plastic
D
Wood
Question 115Single Answer
How should a circular saw blade be maintained?
A
Store in water
B
Use for prying
C
Keep clean and sharp
D
Apply heavy grease
Question 116Single Answer
What is the primary use of a band saw in a workshop?
A
Cutting curves and irregular shapes
B
Drilling holes
C
Measuring angles
D
Filing surfaces
Question 117Single Answer
What safety precaution should be taken when using a power saw?
A
Wear loose clothing
B
Operate without guards
C
Use safety guards and goggles
D
Use a dull blade
Question 118Single Answer
What type of saw is best for cutting thick metal sheets?
A
Hand saw
B
Circular saw
C
Hacksaw
D
Band saw
Question 119Single Answer
How should a band saw be maintained?
A
Leave blade tensioned when not in use
B
Store in a humid environment
C
Clean and adjust blade tension regularly
D
Use for heavy prying
Question 120Single Answer
What is the primary function of a circular saw in metal cutting?
A
Cutting curves
B
Making straight cuts
C
Drilling holes
D
Measuring lengths
Question 121Single Answer
What is the principle of a micrometer?
A
Lever mechanism
B
Screw thread mechanism
C
Gear mechanism
D
Spring mechanism
Question 122Single Answer
What is the least count of a standard micrometer?
A
0.001 mm
B
0.1 mm
C
1 mm
D
0.01 mm
Question 123Single Answer
What is the function of the thimble in a micrometer?
A
Holds the workpiece
B
Locks the spindle
C
Rotates to measure
D
Adjusts the anvil
Question 124Single Answer
How should an outside micrometer be cared for?
A
Store in a humid environment
B
Leave in direct sunlight
C
Apply heavy grease
D
Clean and store in a protective case
Question 125Single Answer
What is the primary use of an inside micrometer?
A
Measuring internal diameters
B
Measuring external dimensions
C
Measuring angles
D
Cutting metal
Question 126Single Answer
What is the least count of a digital micrometer?
A
1 mm
B
0.01 mm
C
0.1 mm
D
0.001 mm
Question 127Single Answer
What is the function of a micrometer depth gauge?
A
Measuring external dimensions
B
Measuring angles
C
Measuring depth of holes
D
Cutting metal
Question 128Single Answer
How is a micrometer reading taken?
A
Add main scale and thimble scale readings
B
Read only the thimble scale
C
Read only the main scale
D
Subtract thimble scale from main scale
Question 129Single Answer
What is the purpose of the ratchet stop in a micrometer?
A
Lock the spindle
B
Adjust the thimble
C
Apply consistent pressure
D
Measure angles
Question 130Single Answer
How should a digital micrometer be maintained?
A
Leave in direct sunlight
B
Submerge in water
C
Apply heavy grease
D
Store with battery removed
Question 131Single Answer
What is the principle of a vernier caliper?
A
Sliding scale mechanism
B
Screw thread mechanism
C
Gear mechanism
D
Lever mechanism
Question 132Single Answer
What is the least count of a standard vernier caliper (metric)?
A
0.02 mm
B
0.01 mm
C
0.1 mm
D
1 mm
Question 133Single Answer
What is the primary use of a vernier caliper?
A
Measuring angles
B
Measuring external and internal dimensions
C
Cutting metal
D
Drilling holes
Question 134Single Answer
How should a vernier caliper be maintained?
A
Clean and store in a protective case
B
Store in a humid environment
C
Apply heavy grease
D
Leave in direct sunlight
Question 135Single Answer
What is the least count of a vernier bevel protractor?
A
10 minutes
B
5 minutes
C
15 minutes
D
20 minutes
Question 136Single Answer
What is the primary use of a vernier bevel protractor?
A
Measuring lengths
B
Drilling holes
C
Measuring angles
D
Cutting metal
Question 137Single Answer
What material is a vernier height gauge typically made of?
A
Plastic
B
Hardened steel
C
Wood
D
Aluminum
Question 138Single Answer
How is a vernier caliper reading taken?
A
Read only the main scale
B
Add main scale and vernier scale readings
C
Subtract vernier scale from main scale
D
Read only the vernier scale
Question 139Single Answer
What is the least count of a digital vernier caliper?
A
0.001 mm
B
0.1 mm
C
0.01 mm
D
1 mm
Question 140Single Answer
What is the primary use of a vernier height gauge?
A
Measuring heights and marking
B
Measuring angles
C
Cutting metal
D
Drilling holes
Question 141Single Answer
What is the primary function of a bench-type drilling machine?
A
Cutting curves
B
Measuring angles
C
Drilling holes in small workpieces
D
Filing surfaces
Question 142Single Answer
What is the main feature of a radial drilling machine?
A
Fixed spindle
B
Movable arm for large workpieces
C
Small size
D
Manual operation only
Question 143Single Answer
What is a gang drilling machine used for?
A
Single hole drilling
B
Multiple holes simultaneously
C
Cutting metal sheets
D
Measuring lengths
Question 144Single Answer
How is the tap drill size determined for a metric thread?
A
Major diameter plus pitch
B
Major diameter minus pitch
C
Major diameter divided by pitch
D
Major diameter multiplied by pitch
Question 145Single Answer
What is the primary use of a pillar-type drilling machine?
A
Cutting curves
B
Drilling large workpieces
C
Measuring angles
D
Filing surfaces
Question 146Single Answer
What is the formula for tap drill size for a 10 mm metric thread with 1.5 mm pitch?
A
11.5 mm
B
9.5 mm
C
10.5 mm
D
8.5 mm
Question 147Single Answer
What is the main advantage of a multiple drilling machine?
A
Slow drilling speed
B
Small size
C
Drilling multiple holes at once
D
Manual operation
Question 148Single Answer
What safety precaution should be taken when using a drilling machine?
A
Use safety guards and goggles
B
Wear loose clothing
C
Operate without clamps
D
Use a dull drill bit
Question 149Single Answer
What is the purpose of a drill chuck in a drilling machine?
A
Hold the workpiece
B
Cut metal
C
Measure depth
D
Hold the drill bit
Question 150Single Answer
What is the tap drill size for an M8 thread with a 1.25 mm pitch?