Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
📚 Exam by Category
▾
Objective Questions

Latest BHEL Artisan Fitter Exam Question (Objective Questions), MCQ in English

Subjects : Fitter, Engineering Calculations, Reasoning

Question Bank BHEL Artisan (Fitter) Exam - English
Back to Exam

Fitter

Question 1Single Answer
What is the primary function of dividers in marking off?
  1. A
    Measuring and transferring distances
  2. B
    Cutting metal
  3. C
    Drilling holes
  4. D
    Filing surfaces
Question 2Single Answer
What material is commonly used for making dividers?
  1. A
    Aluminum
  2. B
    Hardened steel
  3. C
    Plastic
  4. D
    Wood
Question 3Single Answer
How should dividers be maintained to ensure accuracy?
  1. A
    Store in a humid environment
  2. B
    Apply heavy grease
  3. C
    Keep points sharp and clean
  4. D
    Leave in direct sunlight
Question 4Single Answer
What is a scribing block used for?
  1. A
    Marking lines parallel to a surface
  2. B
    Measuring angles
  3. C
    Cutting sheet metal
  4. D
    Drilling holes
Question 5Single Answer
What is the main component of a scribing block?
  1. A
    Blade
  2. B
    Scribe needle
  3. C
    Hammer
  4. D
    Protractor
Question 6Single Answer
What type of dividers are used for precise measurements?
  1. A
    Wing dividers
  2. B
    Spring dividers
  3. C
    Straight dividers
  4. D
    Flat dividers
Question 7Single Answer
How should a scribing block be stored?
  1. A
    In a damp place
  2. B
    Exposed to dust
  3. C
    In a protective case
  4. D
    Submerged in water
Question 8Single Answer
What is the classification of dividers based on their design?
  1. A
    Heavy and light
  2. B
    Single and double
  3. C
    Long and short
  4. D
    Fixed and adjustable
Question 9Single Answer
What care should be taken for dividers to prevent rust?
  1. A
    Use sandpaper
  2. B
    Store in water
  3. C
    Apply oil lightly
  4. D
    Heat regularly
Question 10Single Answer
What is the purpose of a surface plate in marking off?
  1. A
    Providing a flat reference surface
  2. B
    Cutting metal
  3. C
    Measuring angles
  4. D
    Drilling holes
Question 11Single Answer
What is the primary use of a try square?
  1. A
    Checking perpendicularity
  2. B
    Measuring lengths
  3. C
    Drilling holes
  4. D
    Cutting metal
Question 12Single Answer
What material is a try square blade typically made of?
  1. A
    Plastic
  2. B
    Hardened steel
  3. C
    Wood
  4. D
    Aluminum
Question 13Single Answer
How should a try square be maintained?
  1. A
    Store in a humid environment
  2. B
    Bend the blade slightly
  3. C
    Apply heavy grease
  4. D
    Keep blade clean and free of burrs
Question 14Single Answer
What is the function of an ordinary depth gauge?
  1. A
    Measuring angles
  2. B
    Cutting metal
  3. C
    Measuring depth of holes or recesses
  4. D
    Marking lines
Question 15Single Answer
What is the typical accuracy of a protractor?
  1. A
    10 degrees
  2. B
    0.1 degree
  3. C
    5 degrees
  4. D
    1 degree
Question 16Single Answer
How should a protractor be stored to prevent damage?
  1. A
    In a protective cover
  2. B
    In a toolbox with other tools
  3. C
    Exposed to moisture
  4. D
    In direct sunlight
Question 17Single Answer
What is the main use of a protractor in a workshop?
  1. A
    Measuring lengths
  2. B
    Drilling holes
  3. C
    Measuring angles
  4. D
    Filing surfaces
Question 18Single Answer
What is the primary component of an ordinary depth gauge?
  1. A
    Depth bar
  2. B
    Vernier scale
  3. C
    Blade
  4. D
    Protractor
Question 19Single Answer
How should a try square be checked for accuracy?
  1. A
    Compare with a known 90-degree angle
  2. B
    Bend the blade
  3. C
    Submerge in water
  4. D
    Heat the blade
Question 20Single Answer
What is the purpose of a protractor’s scale?
  1. A
    Measuring depth
  2. B
    Measuring angles
  3. C
    Measuring length
  4. D
    Cutting metal
Question 21Single Answer
What is the primary use of a cold chisel?
  1. A
    Measuring lengths
  2. B
    Drilling holes
  3. C
    Cutting or chipping metal
  4. D
    Filing surfaces
Question 22Single Answer
What material is commonly used for cold chisels?
  1. A
    Aluminum
  2. B
    Wood
  3. C
    Plastic
  4. D
    High carbon steel
Question 23Single Answer
What is the typical cutting angle of a cold chisel?
  1. A
    30°
  2. B
    45°
  3. C
    90°
  4. D
    60°
Question 24Single Answer
What type of cold chisel is used for cutting grooves?
  1. A
    Cross-cut chisel
  2. B
    Flat chisel
  3. C
    Round nose chisel
  4. D
    Diamond point chisel
Question 25Single Answer
How should cold chisels be maintained to prevent damage?
  1. A
    Store in water
  2. B
    Use for prying
  3. C
    Keep cutting edge sharp and oiled
  4. D
    Heat regularly
Question 26Single Answer
What is the purpose of a diamond point chisel?
  1. A
    Cutting flat surfaces
  2. B
    Cutting V-shaped grooves
  3. C
    Cutting round holes
  4. D
    Measuring angles
Question 27Single Answer
What care should be taken when using a cold chisel?
  1. A
    Strike with a wooden hammer
  2. B
    Store in a humid environment
  3. C
    Use without a hammer
  4. D
    Wear safety goggles
Question 28Single Answer
What type of cold chisel is used for cutting keyways?
  1. A
    Flat chisel
  2. B
    Cross-cut chisel
  3. C
    Diamond point chisel
  4. D
    Round nose chisel
Question 29Single Answer
What is the cutting angle for a cold chisel used on soft metals?
  1. A
    30°
  2. B
    45°
  3. C
    60°
  4. D
    70°
Question 30Single Answer
How should a damaged cold chisel be handled?
  1. A
    Continue using it
  2. B
    Store in water
  3. C
    Discard immediately
  4. D
    Grind to restore cutting edge
Question 31Single Answer
What is the primary function of a power saw?
  1. A
    Cutting metal or wood
  2. B
    Drilling holes
  3. C
    Measuring lengths
  4. D
    Filing surfaces
Question 32Single Answer
What type of blade is used in a band saw?
  1. A
    Circular blade
  2. B
    Reciprocating blade
  3. C
    Straight blade
  4. D
    Continuous loop blade
Question 33Single Answer
What is the main advantage of a circular saw?
  1. A
    High precision for straight cuts
  2. B
    Slow cutting speed
  3. C
    Used for drilling
  4. D
    Low power consumption
Question 34Single Answer
What material is a band saw blade typically made of?
  1. A
    High-speed steel
  2. B
    Aluminum
  3. C
    Plastic
  4. D
    Wood
Question 35Single Answer
How should a circular saw blade be maintained?
  1. A
    Store in water
  2. B
    Use for prying
  3. C
    Keep clean and sharp
  4. D
    Apply heavy grease
Question 36Single Answer
What is the primary use of a band saw in a workshop?
  1. A
    Cutting curves and irregular shapes
  2. B
    Drilling holes
  3. C
    Measuring angles
  4. D
    Filing surfaces
Question 37Single Answer
What safety precaution should be taken when using a power saw?
  1. A
    Wear loose clothing
  2. B
    Operate without guards
  3. C
    Use safety guards and goggles
  4. D
    Use a dull blade
Question 38Single Answer
What type of saw is best for cutting thick metal sheets?
  1. A
    Hand saw
  2. B
    Circular saw
  3. C
    Hacksaw
  4. D
    Band saw
Question 39Single Answer
How should a band saw be maintained?
  1. A
    Leave blade tensioned when not in use
  2. B
    Store in a humid environment
  3. C
    Clean and adjust blade tension regularly
  4. D
    Use for heavy prying
Question 40Single Answer
What is the primary function of a circular saw in metal cutting?
  1. A
    Cutting curves
  2. B
    Making straight cuts
  3. C
    Drilling holes
  4. D
    Measuring lengths
Question 41Single Answer
What is the principle of a micrometer?
  1. A
    Lever mechanism
  2. B
    Screw thread mechanism
  3. C
    Gear mechanism
  4. D
    Spring mechanism
Question 42Single Answer
What is the least count of a standard micrometer?
  1. A
    0.001 mm
  2. B
    0.1 mm
  3. C
    1 mm
  4. D
    0.01 mm
Question 43Single Answer
What is the function of the thimble in a micrometer?
  1. A
    Holds the workpiece
  2. B
    Locks the spindle
  3. C
    Rotates to measure
  4. D
    Adjusts the anvil
Question 44Single Answer
How should an outside micrometer be cared for?
  1. A
    Store in a humid environment
  2. B
    Leave in direct sunlight
  3. C
    Apply heavy grease
  4. D
    Clean and store in a protective case
Question 45Single Answer
What is the primary use of an inside micrometer?
  1. A
    Measuring internal diameters
  2. B
    Measuring external dimensions
  3. C
    Measuring angles
  4. D
    Cutting metal
Question 46Single Answer
What is the least count of a digital micrometer?
  1. A
    1 mm
  2. B
    0.01 mm
  3. C
    0.1 mm
  4. D
    0.001 mm
Question 47Single Answer
What is the function of a micrometer depth gauge?
  1. A
    Measuring external dimensions
  2. B
    Measuring angles
  3. C
    Measuring depth of holes
  4. D
    Cutting metal
Question 48Single Answer
How is a micrometer reading taken?
  1. A
    Add main scale and thimble scale readings
  2. B
    Read only the thimble scale
  3. C
    Read only the main scale
  4. D
    Subtract thimble scale from main scale
Question 49Single Answer
What is the purpose of the ratchet stop in a micrometer?
  1. A
    Lock the spindle
  2. B
    Adjust the thimble
  3. C
    Apply consistent pressure
  4. D
    Measure angles
Question 50Single Answer
How should a digital micrometer be maintained?
  1. A
    Leave in direct sunlight
  2. B
    Submerge in water
  3. C
    Apply heavy grease
  4. D
    Store with battery removed
Important Questions Package

BHEL Artisan Fitter Exam Online Question Bank Package

Buy BHEL Artisan Fitter Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BHEL Artisan Fitter question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.BHEL Artisan (Fitter) Exam - Hindi
Description : 1000 Question with Answer.
₹101 [₹500]
2.BHEL Artisan (Fitter) Exam - Hindi
Description : 1500 Question with Answer.
₹131 [₹500]
3.BHEL Artisan (Fitter) Exam - Hindi
Description : 2000 Question with Answer.
₹151 [₹500]
4.BHEL Artisan (Fitter) Exam - English
Description : 1000 Question with Answer.
₹101 [₹500]
5.BHEL Artisan (Fitter) Exam - English
Description : 1500 Question with Answer.
₹131 [₹500]
6.BHEL Artisan (Fitter) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
7.BHEL Artisan (Fitter) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
8.BHEL Artisan (Fitter) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
9.BHEL Artisan (Fitter) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam