In the context of improving crop quality, which type of fertilizer provides a balanced supply of nitrogen, phosphorus, and potassium, but may lead to soil acidification if overused?
A
Organic manure
B
Urea-based chemical fertilizer
C
Green manure
D
NPK complex fertilizer
Question 2Single Answer
How does the application of biofertilizers, such as Rhizobium in leguminous crops, enhance quality improvement while minimizing environmental impact?
A
By increasing soil pH
B
By fixing atmospheric nitrogen symbiotically
C
By providing immediate nutrient release
D
By enhancing pesticide resistance
Question 3Single Answer
What is the primary mechanism by which farmyard manure improves soil structure and crop quality in sustainable agriculture?
A
Rapid nutrient dissolution
B
Enhancing soil organic matter and water retention
C
Increasing soil salinity
D
Promoting weed growth
Question 4Single Answer
In organic farming practices, which method of pest control involves using neem oil, and how does it contribute to quality improvement without chemical residues?
A
Biological control
B
Cultural control
C
Mechanical control
D
Botanical pesticide application
Question 5Single Answer
What is the role of crop rotation in quality improvement and disease prevention, particularly in preventing soil-borne pathogens like Fusarium wilt?
A
It increases monoculture yields
B
It disrupts pathogen life cycles and nutrient depletion
C
It enhances pesticide efficacy
D
It promotes uniform soil pH
Question 6Single Answer
Which integrated pest management (IPM) strategy combines the use of pheromone traps for monitoring insect populations, thereby reducing chemical pesticide use and improving crop quality?
A
Chemical control
B
Cultural control
C
Biological and monitoring control
D
Physical control
Question 7Single Answer
In animal reproduction for quality improvement, selective breeding in dairy cattle aims to enhance milk yield; what genetic principle underlies this process?
A
Mutation
B
Gene flow
C
Hybrid vigor (heterosis)
D
Genetic drift
Question 8Single Answer
How does the use of vermicompost as an organic manure contribute to quality improvement by enhancing microbial activity in soil?
A
By increasing soil compaction
B
By accelerating erosion
C
By raising soil temperature
D
By promoting beneficial earthworm activity for nutrient cycling
Question 9Single Answer
What is the impact of excessive use of chemical fertilizers on crop quality and soil health, particularly regarding nutrient imbalance?
A
It enhances micronutrient availability
B
It leads to soil acidification and reduced organic matter
C
It promotes balanced pH levels
D
It increases water retention capacity
Question 10Single Answer
In organic farming, how does intercropping with legumes improve crop quality and protect against soil erosion?
A
By fixing nitrogen and providing ground cover
B
By increasing monoculture yields
C
By enhancing pesticide use
D
By promoting weed proliferation
Question 11Single Answer
Which disease control method in quality improvement involves the use of resistant varieties like Bt cotton for bollworm resistance?
A
Chemical spraying
B
Cultural practices
C
Mechanical removal
D
Genetic resistance
Question 12Single Answer
What is the role of green manuring with crops like Sesbania in improving soil fertility and crop quality?
A
It adds organic matter upon decomposition
B
It depletes soil nutrients
C
It increases soil salinity
D
It promotes pest infestation
Question 13Single Answer
In animal quality improvement, artificial insemination is used to introduce superior genes; what is a potential risk associated with this technique?
A
Lower feed requirements
B
Increased disease resistance
C
Enhanced milk yield immediately
D
Reduced genetic diversity
Question 14Single Answer
How does the practice of mulching in organic farming contribute to quality improvement by conserving soil moisture and suppressing weeds?
A
By increasing evaporation rates
B
By promoting soil compaction
C
By enhancing chemical fertilizer use
D
By providing a physical barrier and organic matter
Question 15Single Answer
What is the biochemical mechanism by which phosphatic fertilizers like DAP improve crop quality by enhancing root development?
A
Nitrogen fixation
B
Potassium uptake for water regulation
C
Phosphorus absorption for energy transfer
D
Calcium addition for cell wall strength
Question 16Single Answer
In pest protection, how does the use of neem-based biopesticides improve crop quality by targeting specific insects without harming beneficial pollinators?
A
By selective toxicity and low persistence
B
By broad-spectrum killing
C
By increasing soil salinity
D
By promoting resistance development
Question 17Single Answer
For animal reproduction, what is the purpose of embryo transfer technology in improving livestock quality?
A
To increase genetic uniformity
B
To enhance disease susceptibility
C
To reduce breeding costs immediately
D
To accelerate genetic propagation from superior dams
Question 18Single Answer
Which organic farming practice, such as composting, improves crop quality by recycling farm waste and enhancing soil biodiversity?
A
Chemical application
B
Nutrient cycling through decomposition
C
Synthetic fertilizer use
D
Monoculture planting
Question 19Single Answer
What is the environmental impact of overusing potassic fertilizers on crop quality and soil health?
A
Improved water retention
B
Potential for nutrient leaching and groundwater pollution
C
Enhanced organic matter
D
Reduced pest infestation
Question 20Single Answer
In disease protection, how does the use of integrated nutrient management (INM) contribute to quality improvement by balancing chemical and organic inputs?
A
By promoting nutrient imbalance
B
By sustaining soil health and reducing disease incidence
C
By increasing synthetic input
D
By enhancing monoculture risks
Question 21Single Answer
Which method of animal quality improvement involves inbreeding to fix desirable traits, but risks inbreeding depression?
A
Selective breeding
B
Outcrossing
C
Crossbreeding
D
Mutation breeding
Question 22Single Answer
How does the application of micronutrients like zinc in fertilizers improve crop quality by addressing deficiency symptoms in cereals?
A
By increasing nitrogen fixation
B
By enhancing enzyme activity and yield
C
By promoting weed growth
D
By raising soil pH
Question 23Single Answer
In organic farming, what is the role of cover crops like clover in quality improvement and pest protection?
A
By depleting soil nutrients
B
By suppressing weeds and improving soil structure
C
By increasing chemical use
D
By promoting erosion
Question 24Single Answer
What is the genetic basis for using hybrid vigor in maize production to improve crop quality?
A
Homozygosity
B
Heterosis from crossing diverse parents
C
Genetic drift
D
Gene flow
Question 25Single Answer
Which pest control method in quality improvement uses predatory insects like ladybirds for aphid control, reducing chemical residues?
A
Chemical spraying
B
Biological control
C
Cultural practices
D
Mechanical removal
Question 26Single Answer
How does the use of compost tea in organic farming improve crop quality by enhancing plant immunity?
A
By increasing soil salinity
B
By accelerating erosion
C
By promoting nutrient leaching
D
By providing beneficial microbes
Question 27Single Answer
In animal reproduction, what is the advantage of cloning in quality improvement for livestock?
A
Increases genetic diversity
B
Produces genetically identical superior animals
C
Reduces breeding costs immediately
D
Enhances disease resistance automatically
Question 28Single Answer
What is the role of balanced fertilization in preventing nutrient deficiencies and improving crop quality?
A
By maintaining soil nutrient equilibrium
B
By promoting over-fertilization
C
By increasing soil compaction
D
By enhancing pest infestation
Question 29Single Answer
How does the practice of no-till farming in organic systems contribute to quality improvement and soil conservation?
A
By increasing erosion
B
By promoting chemical use
C
By preserving soil structure and organic matter
D
By depleting biodiversity
Question 30Single Answer
In disease protection, what is the mechanism of using copper-based fungicides for quality improvement in vineyards?
A
By promoting fungal growth
B
By increasing soil salinity
C
By disrupting fungal cell membranes
D
By enhancing nutrient leaching
Question 31Single Answer
Which breeding technique in animals uses marker-assisted selection to improve traits like disease resistance?
A
Artificial selection with genetic markers
B
Natural selection
C
Random mating
D
Inbreeding
Question 32Single Answer
How does the application of lime in acidic soils improve crop quality by neutralizing pH?
A
By increasing acidity
B
By accelerating erosion
C
By promoting weed growth
D
By raising pH for optimal nutrient availability
Question 33Single Answer
In organic farming, what is the benefit of using trap crops like marigold for nematode control in quality improvement?
A
By attracting pests away from main crops
B
By increasing nematode population
C
By enhancing chemical use
D
By promoting soil compaction
Question 34Single Answer
What is the role of sexed semen in animal reproduction for quality improvement in dairy herds?
A
To increase female calves for milk production
B
To produce mixed-sex offspring
C
To reduce genetic diversity
D
To enhance meat yield
Question 35Single Answer
Which micronutrient deficiency, addressed by foliar sprays, improves crop quality by preventing chlorosis in citrus?
A
Nitrogen
B
Iron
C
Potassium
D
Calcium
Question 36Single Answer
How does the use of Bacillus thuringiensis (Bt) toxins in organic pest control improve crop quality?
A
By broad-spectrum killing
B
By increasing soil salinity
C
By targeting specific insect pests
D
By promoting resistance development
Question 37Single Answer
In quality improvement, what is the advantage of mass selection in plant breeding for crops like wheat?
A
It introduces new genes
B
It reduces genetic variation
C
It selects superior plants from a population
D
It promotes inbreeding
Question 38Single Answer
What is the environmental benefit of using slow-release fertilizers for crop quality improvement?
A
Increased leaching and pollution
B
Enhanced soil compaction
C
Reduced nutrient loss and environmental impact
D
Promotion of weed growth
Question 39Single Answer
How does companion planting with marigolds in vegetable gardens protect against nematodes for quality improvement?
A
By attracting nematodes
B
By increasing soil salinity
C
By releasing allelopathic chemicals
D
By promoting erosion
Question 40Single Answer
In animal quality improvement, what is the purpose of genomic selection in breeding programs?
A
To ignore genetic markers
B
To predict breeding values using DNA
C
To increase inbreeding
D
To reduce trait variation
Question 41Single Answer
What is the primary molecular mechanism behind evaporation absorbing heat from the surroundings?
A
Decrease in vapor pressure
B
Kinetic energy increase in liquid molecules
C
Increase in intermolecular forces
D
Reduction in surface tension
Question 42Single Answer
How does the rate of evaporation vary with temperature, and what is the thermodynamic reason?
A
Varies inversely due to humidity
B
Decreases with temperature due to stronger bonds
C
Remains constant due to equilibrium
D
Increases with temperature due to higher molecular kinetic energy
Question 43Single Answer
In the context of latent heat, why does evaporation lead to cooling, as seen in sweat evaporation?
A
Absorption of heat for phase change
B
Energy release during condensation
C
Decrease in atmospheric pressure
D
Increase in surface area
Question 44Single Answer
What role does surface area play in evaporation rate, and how does it relate to heat absorption?
A
Surface area has no effect on molecular escape
B
Smaller surface area enhances heat absorption
C
Larger surface area increases evaporation by exposing more molecules to air
D
Larger surface area reduces vapor pressure
Question 45Single Answer
How does humidity affect evaporation and heat absorption, based on vapor pressure gradients?
A
High humidity increases evaporation by lowering vapor pressure
B
High humidity decreases evaporation by reducing the pressure gradient
C
Humidity has no impact on heat transfer
D
Low humidity decreases heat absorption
Question 46Single Answer
What is the latent heat of vaporization, and how does it explain the cooling effect in evaporation?
A
Heat released during evaporation
B
Heat for kinetic energy reduction
C
Heat for temperature rise during phase change
D
Heat absorbed to overcome intermolecular forces without temperature change
Question 47Single Answer
In terms of kinetic molecular theory, why do faster-moving molecules escape during evaporation, leading to net heat absorption?
A
Slower molecules have higher energy
B
Bonds strengthen during escape
C
Average energy remains constant
D
Faster molecules carry away more kinetic energy
Question 48Single Answer
How does wind speed influence evaporation rate and associated heat absorption?
A
Increases evaporation by removing saturated air layer
B
Decreases evaporation by increasing humidity
C
Has no effect on molecular movement
D
Reduces heat absorption by cooling air
Question 49Single Answer
What is the role of intermolecular forces in evaporation and heat absorption?
A
Stronger forces increase evaporation rate
B
Weaker forces in liquids facilitate easier escape and heat absorption
C
Forces prevent heat transfer
D
Forces increase vapor pressure
Question 50Single Answer
In a closed system, how does evaporation reach equilibrium, and what happens to net heat absorption?
A
No equilibrium in closed systems
B
Equilibrium increases heat absorption
C
Equilibrium occurs when condensation equals evaporation, net heat zero
D
Equilibrium reduces molecular energy
Important Questions Package
Bihar STET Science Exam Online Question Bank Package
Buy Bihar STET Science Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in Bihar STET Science question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
Bihar STET Science Paper-1 Exam - Hindi
Description : 1000 Question with Answer.
โน101[โน500]
2.
Bihar STET Science Paper-1 Exam - Hindi
Description : 2000 Question with Answer.
โน151[โน500]
3.
Bihar STET Science Paper-1 Exam - Hindi
Description : 3000 Question with Answer.
โน181[โน500]
4.
Bihar STET Science Paper-1 Exam - English
Description : 1000 Question with Answer.
โน101[โน500]
5.
Bihar STET Science Paper-1 Exam - English
Description : 2000 Question with Answer.
โน151[โน500]
6.
Bihar STET Science Paper-1 Exam - English
Description : 3000 Question with Answer.
โน181[โน500]
Science
Question 51Single Answer
Why does evaporation cool the surface of a lake more than its deeper waters?
A
Surface molecules escape, absorbing heat from the surface layer
B
Deeper waters have higher vapor pressure
C
Deep waters have stronger bonds
D
Lakes have uniform temperature
Question 52Single Answer
What is the relationship between evaporation rate and atmospheric pressure, in terms of heat absorption?
A
Higher pressure decreases heat absorption
B
Lower pressure increases evaporation by reducing boiling point
C
Pressure has no effect on molecular escape
D
Lower pressure reduces latent heat
Question 53Single Answer
How does the process of evaporation in plants (transpiration) contribute to heat absorption and cooling?
A
By releasing heat from leaves
B
By increasing leaf temperature
C
By absorbing heat for water vaporization from stomata
D
By reducing vapor pressure
Question 54Single Answer
In terms of energy balance, why is evaporation a key process in the Earth's heat absorption and climate regulation?
A
It releases heat to the atmosphere
B
It has no role in energy transfer
C
It absorbs solar heat, transferring it to the atmosphere
D
It increases surface temperature
Question 55Single Answer
What is the effect of impurities on evaporation rate and heat absorption in a solution?
A
Impurities decrease evaporation by increasing boiling point
B
Impurities increase evaporation by lowering surface tension
C
Impurities have no effect
D
Impurities reduce latent heat
Question 56Single Answer
How does the concept of dynamic equilibrium in evaporation explain net heat absorption in open systems?
How does density vary among solids, liquids, and gases, and what molecular arrangement explains this?
A
Gases have highest density due to close packing
B
Density is uniform across states
C
Liquids have lowest density due to random arrangement
D
Solids have highest density due to close molecular packing
Question 63Single Answer
During melting, what happens to the intermolecular forces and volume of a solid?
A
Forces strengthen, volume decreases
B
Forces remain constant, volume unchanged
C
Forces weaken, volume increases slightly
D
Forces increase, volume decreases significantly
Question 64Single Answer
Why do gases have neither definite shape nor volume, in terms of kinetic molecular theory?
A
Molecules are closely packed
B
Strong intermolecular forces
C
Molecules move freely and fill container space
D
Low kinetic energy
Question 65Single Answer
What is the process of sublimation, and how does it differ from evaporation in terms of state change and heat absorption?
A
Gas to solid, releasing heat
B
Liquid to gas, releasing heat
C
Solid to liquid, absorbing heat
D
Solid to gas directly, absorbing heat like evaporation
Question 66Single Answer
In terms of density, why do liquids like mercury have higher density than water?
A
Weaker intermolecular forces in mercury
B
Higher atomic mass and close packing in mercury
C
Lower kinetic energy in water
D
Increased vapor pressure in mercury
Question 67Single Answer
During condensation, what happens to the kinetic energy and intermolecular forces of gas molecules?
A
Kinetic energy increases, forces weaken
B
Energy remains constant, forces unchanged
C
Kinetic energy decreases, forces strengthen
D
Energy decreases, forces weaken
Question 68Single Answer
Why do gases have low density compared to liquids and solids?
A
High vapor pressure only
B
Strong intermolecular forces
C
Close molecular packing
D
Molecules are far apart with high kinetic energy
Question 69Single Answer
What is the role of latent heat in freezing, and how does it relate to state change?
A
Heat absorbed, solid to liquid
B
Heat absorbed, gas to liquid
C
Heat released, liquid to solid
D
Heat released, solid to gas
Question 70Single Answer
How does surface tension in liquids relate to their properties compared to gases?
A
Gases have high surface tension due to close molecules
B
Liquids have surface tension due to cohesive forces at surface
C
Surface tension is absent in liquids
D
Gases have no cohesive forces
Question 71Single Answer
In sublimation, why do substances like naphthalene absorb heat directly from solid to gas state?
A
Weak intermolecular forces allow direct transition
B
High kinetic energy in solids
C
Increased vapor pressure in liquids
D
Reduced density in gases
Question 72Single Answer
What is the difference in molecular arrangement between amorphous and crystalline solids in terms of properties?
A
Amorphous have ordered arrangement, definite shape
B
Amorphous have higher melting point
C
Crystalline have ordered lattice, higher density
D
Both have identical properties
Question 73Single Answer
During evaporation, why does the temperature of the remaining liquid decrease?
A
High-energy molecules escape, lowering average kinetic energy
B
Heat is released to surroundings
C
Intermolecular forces strengthen
D
Vapor pressure increases
Question 74Single Answer
How does the property of compressibility differ among solids, liquids, and gases?
A
Solids are most compressible
B
Compressibility is uniform
C
Liquids are more compressible than solids
D
Gases are highly compressible due to large intermolecular space
Question 75Single Answer
What is the process of deposition, and how does it involve heat release?
A
Gas to solid, releasing heat
B
Gas to liquid, absorbing heat
C
Liquid to gas, releasing heat
D
Solid to liquid, absorbing heat
Question 76Single Answer
Why do liquids have definite volume but no definite shape?
A
Molecules are fixed in position
B
Strong forces allow shape change only
C
High kinetic energy prevents volume
D
Molecules slide past each other but maintain volume
Question 77Single Answer
In terms of phase diagrams, what is the triple point where all three states coexist?
A
Point of maximum pressure
B
Point of no heat absorption
C
Specific temperature and pressure for equilibrium
D
Highest density point
Question 78Single Answer
How does the density of water anomaly at 4ยฐC affect its properties compared to other liquids?
A
Density decreases with cooling
B
No anomaly in water
C
Density increases with temperature
D
Maximum density at 4ยฐC, aiding aquatic life
Question 79Single Answer
What is the role of diffusion in gases versus liquids in terms of molecular movement?
A
Faster in liquids due to close packing
B
Equal in both states
C
Faster in gases due to high kinetic energy and space
D
Absent in gases
Question 80Single Answer
During boiling, why is heat absorbed without temperature rise until complete vaporization?
A
Latent heat overcomes intermolecular forces
B
Kinetic energy decreases
C
Vapor pressure decreases
D
Surface tension increases
Question 81Single Answer
What is the difference in viscosity between liquids and gases, and what causes it?
A
Liquids have higher viscosity due to stronger intermolecular forces
B
Gases have higher viscosity due to close molecules
C
Viscosity is uniform
D
Gases have no viscosity
Question 82Single Answer
How does the process of freezing in supercooled liquids lead to rapid heat release?
A
By absorbing heat from surroundings
B
By reducing density
C
By increasing molecular energy
D
By releasing latent heat during crystallization
Question 83Single Answer
Why do amorphous solids like glass have no sharp melting point, unlike crystalline solids?
A
Ordered lattice structure
B
Strong forces
C
High density
D
Irregular molecular arrangement
Question 84Single Answer
In terms of Boyle's law, how does volume change with pressure in gases during compression, affecting properties?
A
Volume increases with pressure
B
Volume remains constant
C
Volume decreases with increased pressure
D
Pressure has no effect
Question 85Single Answer
What is the effect of temperature on the viscosity of liquids, and how does it relate to state properties?
A
Increases viscosity by strengthening bonds
B
Increases density
C
No effect on liquids
D
Decreases viscosity by increasing kinetic energy
Question 86Single Answer
During sublimation of dry ice, why is heat absorbed, and what is the state change?
A
Solid to liquid, releasing heat
B
Solid to gas, absorbing heat
C
Gas to liquid, absorbing heat
D
Liquid to gas, releasing heat
Question 87Single Answer
How does the property of fluidity in liquids differ from rigidity in solids?
A
Liquids have fixed molecular positions
B
Both have same fluidity
C
Solids have rigid structure due to strong forces, liquids flow
D
Gases are rigid
Question 88Single Answer
What is the role of triple point in water's phase diagram, where solid, liquid, and gas coexist?
A
Highest temperature point
B
Point of maximum density
C
Equilibrium point at specific pressure and temperature
D
No coexistence possible
Question 89Single Answer
Why do gases expand to fill their container, affecting their volume property?
A
Strong intermolecular forces
B
Close molecular packing
C
High kinetic energy and negligible forces
D
High density
Question 90Single Answer
In terms of Charles's law, how does volume change with temperature in gases at constant pressure?
A
Volume decreases with temperature
B
Volume increases proportionally with temperature
C
Volume remains constant
D
Temperature has no effect
Question 91Single Answer
What is the anomaly in water's density curve, and how does it impact aquatic ecosystems?
A
Density decreases below 4ยฐC, preventing lake freezing
B
Density increases below 4ยฐC, causing sinking
C
No anomaly in water
D
Density uniform at all temperatures
Question 92Single Answer
How does the process of condensation release heat, contrasting with evaporation's heat absorption?
A
Kinetic energy increases
B
Vapor pressure decreases only
C
Molecules lose kinetic energy, forming bonds
D
Surface tension increases
Question 93Single Answer
Why do crystalline solids have higher melting points than amorphous solids?
A
Irregular arrangement weakens forces
B
Amorphous have stronger bonds
C
Ordered lattice requires more energy to break
D
Melting point is uniform
Question 94Single Answer
In terms of Avogadro's law, how does volume relate to the number of gas molecules at constant temperature and pressure?
A
Volume decreases with more molecules
B
Volume remains constant
C
Volume is proportional to number of molecules
D
Molecules have no effect
Question 95Single Answer
What is the effect of impurities on the melting point of solids?
A
Increases melting point
B
Decreases melting point by disrupting lattice
C
No effect on solids
D
Increases density only
Question 96Single Answer
How does the property of elasticity in solids differ from plasticity in some materials?
A
Elasticity deforms permanently
B
Both are identical properties
C
Plasticity returns to shape
D
Elasticity returns to shape, plasticity deforms permanently
Question 97Single Answer
During the phase change from liquid to gas, why does temperature remain constant despite heat addition?
A
Heat increases kinetic energy
B
Vapor pressure decreases
C
Intermolecular forces strengthen
D
Latent heat used for bond breaking
Question 98Single Answer
Why do liquids wet certain surfaces but not others, in terms of surface tension and adhesion?
A
High adhesion to surface molecules
B
Solids do not wet
C
Gases have no surface tension
D
Balance between cohesion and adhesion
Question 99Single Answer
What is the role of critical point in gases, where distinction between liquid and gas disappears?
A
Highest pressure point
B
No critical point in gases
C
Point of maximum density
D
Specific temperature and pressure for supercritical fluid
Question 100Single Answer
How does the diffusion rate in solids compare to liquids and gases?
A
Slowest in solids due to strong forces
B
Fastest in solids due to close packing
C
Equal in all states
D
Absent in liquids
Art of Teaching
Question 101Single Answer
What is the primary meaning of teaching in educational contexts?
A
Managing classroom discipline
B
Grading student assignments
C
Imparting knowledge and facilitating learning
D
Organizing school events
Question 102Single Answer
Which of the following best describes the process of learning?
A
Passive absorption of facts
B
Active construction of knowledge through interaction
C
Memorization without application
D
Teacher's lecture only
Question 103Single Answer
What is a key characteristic of effective teaching?
A
Strict adherence to routine
B
Adaptability to students' needs
C
Ignoring individual differences
D
Focus on rote learning
Question 104Single Answer
In the teaching-learning process, what role does motivation play?
A
It is irrelevant
B
It only affects teachers
C
It drives student engagement and persistence
D
It hinders progress
Question 105Single Answer
What does learning primarily involve according to modern pedagogy?
A
Temporary recall of information
B
Physical exercise only
C
Permanent change in behavior through experience
D
Group competitions
Question 106Single Answer
Which characteristic is essential for the teaching process?
A
Isolation from students
B
No planning required
C
Interaction between teacher and learner
D
Uniform pace for all
Question 107Single Answer
What is the core of the learning process?
A
Sequential stages of acquisition, retention, and application
B
Random exposure to stimuli
C
End-product evaluation only
D
Teacher dominance
Question 108Single Answer
Which of the following is a characteristic of mature learning?
A
Dependence on external rewards
B
Short-term and superficial
C
Self-directed and reflective
D
Identical for every learner
Question 109Single Answer
How is teaching differentiated from training?
A
Teaching focuses on holistic development
B
Training is more interactive
C
They are identical
D
Teaching lacks structure
Question 110Single Answer
What does 'interactive' mean in the characteristics of teaching?
A
One-way communication
B
Two-way exchange of ideas
C
No student input
D
Digital tools only
Question 111Single Answer
Attitudes, values, and interests are reflected by which domain?
A
Affective domain
B
Cognitive domain
C
Psychomotor domain
D
None of the above
Question 112Single Answer
According to professional ethics, a teacher should?
A
Be biased in policies
B
Make derogatory statements about colleagues
C
Not consider private gains
D
Fail to recommend worthy candidates
Question 113Single Answer
Effective teaching is a function of?
A
Teacher's positive attitude towards teaching
B
Teacher's honesty
C
Teacher's scholarship
D
Teacher's ability to make students learn
Question 114Single Answer
Teaching is not a?
A
Way of developing national growth index
B
Profession to direct the child
C
Profession to bring desirable changes in behavior
D
Profession to help society progress
Question 115Single Answer
Which statement about teaching is incorrect?
A
Teaching is confined to classrooms only
B
Teaching is a tripolar process
C
Teaching is effect-directed
D
Teaching is interactive
Question 116Single Answer
In your view, teaching is?
A
A process
B
An art
C
A skill
D
Both art and skill
Question 117Single Answer
Which instructional method involves both in-person and online components?
A
Asynchronous learning
B
Flipped classroom
C
Blended learning
D
Synchronous learning
Question 118Single Answer
What is an example of synchronous instructional delivery?
A
Live online class with Q&A
B
Pre-recorded video lecture
C
Reading an e-book for homework
D
Online quiz on LMS
Question 119Single Answer
Key competency for Learner-Controlled Instruction?
A
Strong self-regulation and metacognition
B
Group problem-solving
C
Memorization
D
Following pre-set schedule
Question 120Single Answer
Teacher's role in Group-Controlled Instruction?
A
Lecturer
B
Disciplinarian
C
Facilitator
D
Content provider
Question 121Single Answer
Key advantage of Teacher-Controlled Instruction?
A
Fosters creativity
B
Student-led collaboration
C
Efficient delivery to large groups
D
Self-paced work
Question 122Single Answer
What is the meaning of 'facilitation' in teaching?
A
Direct instruction only
B
Grading exams
C
Guiding students to discover knowledge
D
Classroom management
Question 123Single Answer
Which is a characteristic of the learning curve?
A
Linear progression
B
Plateaus and accelerations
C
Constant speed
D
Decline over time
Question 124Single Answer
In teaching, what is 'scaffolding'?
A
Removing all support
B
Ignoring errors
C
Permanent guidance
D
Temporary support to build independence
Question 125Single Answer
Learning is effective when it is?
A
Meaningful and contextual
B
Rote and repetitive
C
Isolated facts
D
Teacher-imposed
Question 126Single Answer
What distinguishes formal teaching from informal?
A
Informal is always digital
B
No interaction in informal
C
Same characteristics
D
Structured objectives in formal
Question 127Single Answer
The process of teaching involves?
A
Only execution
B
Planning, execution, evaluation
C
No evaluation
D
Random activities
Question 128Single Answer
A characteristic of good learning is?
A
Forgetting quickly
B
Transfer of learning
C
No retention
D
Uniformity
Question 129Single Answer
Teaching as a social process means?
A
Isolated activity
B
No community role
C
Influenced by societal values
D
Individual only
Question 130Single Answer
What is 'zone of proximal development' in learning process?
A
What learner can do alone
B
Beyond help
C
Gap between alone and with help
D
Past achievements
General Knowledge
Question 131Single Answer
Yojna a weekly journal
A
Ministry of Financeย ย ย ย ย
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 132Single Answer
Which of the following was the main cause of the Carnatic Wars?
A
British vs. Marathas for control over the Deccan
B
French vs. British for control over the Carnatic region
C
Invasion by the Mughals
D
Disputes between the Marathas and Nizam of Hyderabad
Question 133Single Answer
Bihar is located in which part of India?
A
Western India
B
Northern India
C
Eastern India
D
Southern India
Question 134Single Answer
What is the capital of Bihar?
A
Gaya
B
Bhagalpur
C
Patna
D
Muzaffarpur
Question 135Single Answer
On what date did India celebrate the 9th anniversary of the Goods and Services Tax (GST) implementation?
A
July 1, 2026
B
June 30, 2026
C
July 2, 2026
D
June 29, 2026
Environmental Science
Question 136Single Answer
The grain size (USDA) of silt in soil ranges between :
A
0.2 mm to 0.5 mm
B
0.5 mm to 0.1 mm
C
0.1 mm to 0.05 mm
D
0.05 mm to 0.002 mm
Question 137Single Answer
What will be BOD, for a wastewater sample when 21 ml of sample is diluted to 300 ml in BOD bottle to determine dissolved oxygen .
[Given: Initial DO, = 10 mg/l; Five days later DO5 = 5 mg/l]
A
~ 5 mg/l
B
~ 25 mg/l
C
~ 71.4 mg/l
D
~75 mg/l
Question 138Single Answer
What will be the concentration of 40 ppb SOโ in ยตg/mยณ unit at 25ยฐC ?
A
~ 0.04 ยตg/mยณ
B
~ 1047 ยตg/mยณ
C
~ 104.7 ยตg/mยณ
D
~ 10.47 ยตg/mยณ
Question 139Single Answer
National Ambient air quality standards typically include following components :
A
Maximum and Minimum pollutant levels, adjustment for co - pollutants
B
Abetment strategies, non - attainment penalties
C
Ambient temperature, size distribution and relative humidity
D
Indicator (Chemical/Chemical class), Averaging time, Pollutant form and level
Question 140Single Answer
Primary air pollutants differ from secondary air pollutants as they :
A
are present in levels that can be weighed on filter paper
B
are directly emitted from identified sources
C
have undergone chemical transformation in air after release from identified sources
D
are designated as hazardous air pollutants
Mathematical aptitude
Question 141Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 142Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 143Single Answer
356 x 936 โ 356 x 836 = ?
A
35600ย ย
B
34500
C
9630
D
93600
Question 144Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 145Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
ย
Logical Reasoning
Question 146Single Answer
How many such pairs of letters are there in the word โCLEANLINESSโ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 147Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 148Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
A
X
B
W
C
I
D
H
Question 149Single Answer
Passage :
Directionย : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
A
SUM
B
BIG
C
Both BIG and THE
D
FOR
E
Both FOR and BIG
Question 150Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be second from the right ?