Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
šŸ“š Exam by Category
ā–¾
Objective Questions

Latest BRO MSW Painter Exam Question (Objective Questions), MCQ in English

Subjects : Concerned Subject MSW (Painter)

Question Bank BRO MSW (Painter) Exam - English
Back to Exam

Concerned Subject MSW (Painter)

Question 1Single Answer
The main purpose of cutting a stencil is?
  1. A
    To reproduce letters or designs repeatedly
  2. B
    To decorate walls
  3. C
    To paint freehand designs
  4. D
    To mix paints
Question 2Single Answer
The tool commonly used for cutting stencils is?
  1. A
    Hacksaw
  2. B
    Chisel
  3. C
    Stencil knife
  4. D
    Screwdriver
Question 3Single Answer
What is the ideal material for reusable stencils?
  1. A
    Tissue paper
  2. B
    Thin metal sheet
  3. C
    Cotton cloth
  4. D
    Plastic film only
Question 4Single Answer
The stencil knife should be kept?
  1. A
    Sharp
  2. B
    Blunt
  3. C
    Rusty
  4. D
    Heavy
Question 5Single Answer
What is the main quality of a good stencil?
  1. A
    Durability and clean edges
  2. B
    Random letter spacing
  3. C
    Bright colors
  4. D
    Large holes
Question 6Single Answer
When cutting stencils, the surface under the sheet should be?
  1. A
    Soft and flat
  2. B
    Rough
  3. C
    Uneven
  4. D
    Hard metal plate
Question 7Single Answer
Stencil cutting requires letters to be designed with?
  1. A
    Breaks in enclosed areas
  2. B
    Continuous loops
  3. C
    Extra thick lines
  4. D
    No spacing
Question 8Single Answer
To ensure accuracy while cutting stencils, the lines should be?
  1. A
    Wavy
  2. B
    Unclear
  3. C
    Freehand drawn
  4. D
    Clearly marked and followed carefully
Question 9Single Answer
The purpose of bridges in stencil letters is?
  1. A
    To decorate
  2. B
    To hold the inner parts in place
  3. C
    To make letters bold
  4. D
    To reduce material waste
Question 10Single Answer
The most common font style used for stencil cutting is?
  1. A
    Times New Roman
  2. B
    Italic
  3. C
    Script
  4. D
    Stencil type
Question 11Single Answer
What is used to hold the stencil sheet steady during cutting?
  1. A
    Tape or clips
  2. B
    Nails
  3. C
    Glue
  4. D
    Sandpaper
Question 12Single Answer
A stencil is mainly used to apply?
  1. A
    Paint
  2. B
    Water
  3. C
    Glue
  4. D
    Oil
Question 13Single Answer
The spacing between stencil letters should be?
  1. A
    Even and uniform
  2. B
    Random
  3. C
    Uneven
  4. D
    Very wide
Question 14Single Answer
Which material is least suitable for stencil making?
  1. A
    Cardboard
  2. B
    Thin metal sheet
  3. C
    Soft cloth
  4. D
    Plastic
Question 15Single Answer
The inner parts of letters like ā€œOā€ or ā€œPā€ in stencils are called?
  1. A
    Links
  2. B
    Bridges
  3. C
    Eyes
  4. D
    Gaps
Question 16Single Answer
The process of transferring paint through a stencil is called?
  1. A
    Spraying or dabbing
  2. B
    Printing
  3. C
    Drawing
  4. D
    Rolling
Question 17Single Answer
What should be avoided while cutting stencil letters?
  1. A
    Jagged edges
  2. B
    Smooth cuts
  3. C
    Correct spacing
  4. D
    Proper bridges
Question 18Single Answer
To prevent tearing, stencil material should be?
  1. A
    Too thin
  2. B
    Extremely thick
  3. C
    Moderately thick
  4. D
    Transparent only
Question 19Single Answer
When cutting curves in a stencil, the knife should move?
  1. A
    Backwards
  2. B
    In one fast stroke
  3. C
    Randomly
  4. D
    In short controlled strokes
Question 20Single Answer
A stencil brush has bristles that are?
  1. A
    Short and stiff
  2. B
    Long and soft
  3. C
    Curly and loose
  4. D
    Flat and floppy
Question 21Single Answer
Which direction should the stencil knife be pulled?
  1. A
    Away from the body
  2. B
    Toward the body
  3. C
    Sideways
  4. D
    Randomly
Question 22Single Answer
Before cutting a stencil, the design should be?
  1. A
    Painted directly
  2. B
    Traced or drawn accurately
  3. C
    Printed on fabric
  4. D
    Sprayed blindly
Question 23Single Answer
The part removed from the stencil during cutting is called?
  1. A
    Bridge
  2. B
    Letter body
  3. C
    Waste piece
  4. D
    Base
Question 24Single Answer
For military or road marking, which stencil material is preferred?
  1. A
    Metal
  2. B
    Paper
  3. C
    Fabric
  4. D
    Plastic film
Question 25Single Answer
While cutting letters, bridges should be placed at?
  1. A
    Random points
  2. B
    Proper intervals
  3. C
    Top edge only
  4. D
    None at all
Question 26Single Answer
The process of using stencil paint through spray is called?
  1. A
    Mixing
  2. B
    Dabbing
  3. C
    Airbrushing
  4. D
    Rolling
Question 27Single Answer
To make a neat stencil, the cutting blade should be kept at what angle?
  1. A
    15Ā°
  2. B
    60Ā°
  3. C
    90Ā°
  4. D
    30ā€“45Ā°
Question 28Single Answer
Which of the following is NOT used for stencil making?
  1. A
    Wood plank
  2. B
    Cardboard
  3. C
    Oil paper
  4. D
    Plastic sheet
Question 29Single Answer
To ensure durability, stencils can be coated with?
  1. A
    Varnish
  2. B
    Ink
  3. C
    Paint thinner
  4. D
    Soap solution
Question 30Single Answer
Before applying paint through stencil, ensure?
  1. A
    Brush is dirty
  2. B
    Surface is wet
  3. C
    Stencil is firmly fixed
  4. D
    Paint is thickened with water
Question 31Single Answer
Which tool sharpens stencil knives?
  1. A
    Cutter wheel
  2. B
    File
  3. C
    Hammer
  4. D
    Oil stone
Question 32Single Answer
The cutting mat is used to?
  1. A
    Mix paint
  2. B
    Decorate stencil
  3. C
    Protect table surface
  4. D
    Store brushes
Question 33Single Answer
To avoid paint spreading under stencil edges, apply paint by?
  1. A
    Pouring paint
  2. B
    Heavy brushing
  3. C
    Rubbing hard
  4. D
    Light dabbing motion
Question 34Single Answer
What happens if bridges are too thin?
  1. A
    They break easily
  2. B
    They hold firmly
  3. C
    Letters look neat
  4. D
    Paint flow stops
Question 35Single Answer
The cutting should start from?
  1. A
    Outside border
  2. B
    Inside of letter
  3. C
    Middle randomly
  4. D
    Lower edge
Question 36Single Answer
When cutting, always rotate the?
  1. A
    Both together
  2. B
    Knife, not the sheet
  3. C
    Sheet, not the knife
  4. D
    None
Question 37Single Answer
Which paint is mostly used with stencils?
  1. A
    Poster paint
  2. B
    Watercolor
  3. C
    Enamel or emulsion
  4. D
    Oil pastel
Question 38Single Answer
The purpose of stencil bridges is to?
  1. A
    Reduce paint use
  2. B
    Decorate design
  3. C
    Increase color depth
  4. D
    Connect separate parts of letters
Question 39Single Answer
When marking large areas, which type of stencil is best?
  1. A
    Wood
  2. B
    Paper
  3. C
    Cloth
  4. D
    Metal
Question 40Single Answer
For small lettering, stencil material should be?
  1. A
    Very flexible
  2. B
    Thick
  3. C
    Transparent only
  4. D
    Thin
Question 41Single Answer
The stencil knife handle is usually made of?
  1. A
    Rubber
  2. B
    Metal only
  3. C
    Wood or plastic
  4. D
    Glass
Question 42Single Answer
Stencils for signs are made in?
  1. A
    Random forms
  2. B
    Script letters
  3. C
    Cursive letters
  4. D
    Block letters
Question 43Single Answer
What ensures stencil alignment on surface?
  1. A
    Nails
  2. B
    Guide marks
  3. C
    Glue
  4. D
    Tape only
Question 44Single Answer
Which step comes first in stencil making?
  1. A
    Painting
  2. B
    Design drawing
  3. C
    Spraying
  4. D
    Drying
Question 45Single Answer
Stencils are mostly used for?
  1. A
    Drilling
  2. B
    Sculpting
  3. C
    Weaving
  4. D
    Lettering and numbering
Question 46Single Answer
After cutting, the stencil should be?
  1. A
    Cleaned and stored flat
  2. B
    Rolled tightly
  3. C
    Painted over
  4. D
    Folded
Question 47Single Answer
The stencil letters should have a minimum bridge width of about?
  1. A
    1ā€“2 mm
  2. B
    3ā€“5 mm
  3. C
    6ā€“8 mm
  4. D
    10 mm
Question 48Single Answer
To avoid injury while cutting, always use?
  1. A
    Wet cloth
  2. B
    Bare hands
  3. C
    Safety gloves
  4. D
    Tape
Question 49Single Answer
A stencil design can be reversed for printing by?
  1. A
    Flipping it over
  2. B
    Turning it upside down
  3. C
    Adding extra bridges
  4. D
    Thickening letters
Question 50Single Answer
For marking curved surfaces, the stencil should be?
  1. A
    Double thick
  2. B
    Rigid
  3. C
    Metal only
  4. D
    Flexible
Important Questions Package

BRO MSW Painter Exam Online Question Bank Package

Buy BRO MSW Painter Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BRO MSW Painter question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.BRO MSW (Painter) Exam - Hindi
Description : 940 Question with Answer
ā‚¹101 [ā‚¹500]
2.BRO MSW (Painter) Exam - English
Description : 1000 Question with Answer
ā‚¹101 [ā‚¹500]
3.BRO MSW (Painter) Exam - Hindi
Description : 940 Question & Answer Download in PDF (Send by Email)
ā‚¹151 [ā‚¹450]
4.BRO MSW (Painter) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
ā‚¹151 [ā‚¹450]
5.BRO MSW (Painter) Exam Question Bank Book - Hindi
Description : 940 Question with Answer (Printed Material)
ā‚¹450 [ā‚¹800]
6.BRO MSW (Painter) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
ā‚¹390 [ā‚¹600]
Back to Exam