Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
📚 Exam by Category
▾
Objective Questions

Latest BTSC ITI Instructor Fitter Exam Question (Objective Questions), MCQ in English

Subjects : Technical Subject (Fitter), General Studies & Current Affairs

Question Bank BTSC ITI Instructor (Fitter) Exam - English
Back to Exam

Technical Subject (Fitter)

Question 1Single Answer
Which tool is used to cut external threads?
  1. A
    Die
  2. B
    Tap
  3. C
    Chisel
  4. D
    Reamer
Question 2Single Answer
What is the purpose of a reamer?
  1. A
    Cutting threads
  2. B
    Finishing holes
  3. C
    Cutting grooves
  4. D
    Sharpening tools
Question 3Single Answer
A hacksaw is used for:
  1. A
    Cutting metal
  2. B
    Cutting wood
  3. C
    Drilling
  4. D
    Filing
Question 4Single Answer
What is the function of a centre punch?
  1. A
    Marking the centre of a hole before drilling
  2. B
    Cutting threads
  3. C
    Scraping metal
  4. D
    Smoothing surfaces
Question 5Single Answer
The term "pitch" in threads refers to:
  1. A
    The diameter of the thread
  2. B
    The distance between adjacent threads
  3. C
    The depth of the thread
  4. D
    The material of the thread
Question 6Single Answer
Which tool is used for making internal threads?
  1. A
    Tap
  2. B
    Die
  3. C
    File
  4. D
    Drill
Question 7Single Answer
A bench vice is used for:
  1. A
    Holding workpieces
  2. B
    Cutting metal
  3. C
    Drilling holes
  4. D
    Measuring dimensions
Question 8Single Answer
Which material is commonly used for making cutting tools?
  1. A
    Mild steel
  2. B
    High-speed steel
  3. C
    Copper
  4. D
    Aluminium
Question 9Single Answer
Which file is used for rough filing?
  1. A
    Smooth file
  2. B
    Bastard file
  3. C
    Dead smooth file
  4. D
    Half-round file
Question 10Single Answer
Which of the following is used for checking the flatness of a surface?
  1. A
    Surface plate
  2. B
    Try square
  3. C
    Caliper
  4. D
    Micrometer
Question 11Single Answer
A micrometer measures in:
  1. A
    Millimeters
  2. B
    Microns
  3. C
    Centimeters
  4. D
    Inches
Question 12Single Answer
A scriber is used for:
  1. A
    Cutting threads
  2. B
    Marking lines on metal surfaces
  3. C
    Drilling holes
  4. D
    Cutting metal
Question 13Single Answer
What does the term "clearance fit" refer to?
  1. A
    A fit where parts are press-fitted
  2. B
    A fit where there is a small gap between parts
  3. C
    A fit where parts are interference-fitted
  4. D
    A fit where parts do not come into contact
Question 14Single Answer
Which of the following is a marking tool?
  1. A
    Chisel
  2. B
    File
  3. C
    Scriber
  4. D
    Reamer
Question 15Single Answer
A vernier caliper is used for measuring:
  1. A
    Lengths
  2. B
    Angles
  3. C
    Surface roughness
  4. D
    Thread pitch
Question 16Single Answer
A tap wrench is used for:
  1. A
    Drilling holes
  2. B
    Holding taps
  3. C
    Cutting threads
  4. D
    Filing
Question 17Single Answer
Which type of file is used for finishing curved surfaces?
  1. A
    Flat file
  2. B
    Round file
  3. C
    Half-round file
  4. D
    Triangular file
Question 18Single Answer
In a micrometer, the thimble rotates around the:
  1. A
    Spindle
  2. B
    Anvil
  3. C
    Frame
  4. D
    Sleeve
Question 19Single Answer
Which part of a micrometer holds the object being measured?
  1. A
    Spindle
  2. B
    Anvil
  3. C
    Sleeve
  4. D
    Thimble
Question 20Single Answer
What is the primary purpose of a surface gauge?
  1. A
    Checking the depth of a hole
  2. B
    Marking out lines parallel to a reference surface
  3. C
    Measuring diameters
  4. D
    Cutting grooves
Question 21Single Answer
The hardness of a file is measured in terms of:
  1. A
    HRC
  2. B
    BHN
  3. C
    Vickers
  4. D
    Mohs scale
Question 22Single Answer
A feeler gauge is used to measure:
  1. A
    Thickness of gaps
  2. B
    Diameter of holes
  3. C
    Angle of a surface
  4. D
    Depth of grooves
Question 23Single Answer
In a fitting shop, what is the purpose of a prick punch?
  1. A
    Light marking of drill centers
  2. B
    Heavy marking for chiseling
  3. C
    Rough filing
  4. D
    Thread cutting
Question 24Single Answer
What is the advantage of using a Vernier height gauge?
  1. A
    Measuring large heights accurately
  2. B
    Checking thread depth
  3. C
    Measuring thread pitch
  4. D
    Measuring the internal diameter of holes
Question 25Single Answer
A hand reamer is used for:
  1. A
    Enlarging existing holes
  2. B
    Tapping threads
  3. C
    Cutting new holes
  4. D
    Grinding surfaces
Question 26Single Answer
Which part of the hacksaw holds the blade?
  1. A
    Frame
  2. B
    Handle
  3. C
    Teeth
  4. D
    Nose
Question 27Single Answer
A surface plate is primarily used for:
  1. A
    Grinding surfaces
  2. B
    Holding workpieces
  3. C
    Checking flatness
  4. D
    Cutting threads
Question 28Single Answer
What is the main purpose of using an engineer’s square?
  1. A
    Checking angles
  2. B
    Measuring lengths
  3. C
    Cutting grooves
  4. D
    Marking drill points
Question 29Single Answer
Which type of tap is used for the final finishing of threads?
  1. A
    Bottoming tap
  2. B
    Taper tap
  3. C
    Plug tap
  4. D
    Hand tap
Question 30Single Answer
Which tool is used to deburr sharp edges after drilling or cutting?
  1. A
    Scraper
  2. B
    File
  3. C
    Chisel
  4. D
    Tap
Question 31Single Answer
What is the primary function of dividers in marking off?
  1. A
    Measuring and transferring distances
  2. B
    Cutting metal
  3. C
    Drilling holes
  4. D
    Filing surfaces
Question 32Single Answer
What material is commonly used for making dividers?
  1. A
    Aluminum
  2. B
    Hardened steel
  3. C
    Plastic
  4. D
    Wood
Question 33Single Answer
How should dividers be maintained to ensure accuracy?
  1. A
    Store in a humid environment
  2. B
    Apply heavy grease
  3. C
    Keep points sharp and clean
  4. D
    Leave in direct sunlight
Question 34Single Answer
What is a scribing block used for?
  1. A
    Marking lines parallel to a surface
  2. B
    Measuring angles
  3. C
    Cutting sheet metal
  4. D
    Drilling holes
Question 35Single Answer
What is the main component of a scribing block?
  1. A
    Blade
  2. B
    Scribe needle
  3. C
    Hammer
  4. D
    Protractor
Question 36Single Answer
What type of dividers are used for precise measurements?
  1. A
    Wing dividers
  2. B
    Spring dividers
  3. C
    Straight dividers
  4. D
    Flat dividers
Question 37Single Answer
How should a scribing block be stored?
  1. A
    In a damp place
  2. B
    Exposed to dust
  3. C
    In a protective case
  4. D
    Submerged in water
Question 38Single Answer
What is the classification of dividers based on their design?
  1. A
    Heavy and light
  2. B
    Single and double
  3. C
    Long and short
  4. D
    Fixed and adjustable
Question 39Single Answer
What care should be taken for dividers to prevent rust?
  1. A
    Use sandpaper
  2. B
    Store in water
  3. C
    Apply oil lightly
  4. D
    Heat regularly
Question 40Single Answer
What is the purpose of a surface plate in marking off?
  1. A
    Providing a flat reference surface
  2. B
    Cutting metal
  3. C
    Measuring angles
  4. D
    Drilling holes
Question 41Single Answer
What is the primary use of a try square?
  1. A
    Checking perpendicularity
  2. B
    Measuring lengths
  3. C
    Drilling holes
  4. D
    Cutting metal
Question 42Single Answer
What material is a try square blade typically made of?
  1. A
    Plastic
  2. B
    Hardened steel
  3. C
    Wood
  4. D
    Aluminum
Question 43Single Answer
How should a try square be maintained?
  1. A
    Store in a humid environment
  2. B
    Bend the blade slightly
  3. C
    Apply heavy grease
  4. D
    Keep blade clean and free of burrs
Question 44Single Answer
What is the function of an ordinary depth gauge?
  1. A
    Measuring angles
  2. B
    Cutting metal
  3. C
    Measuring depth of holes or recesses
  4. D
    Marking lines
Question 45Single Answer
What is the typical accuracy of a protractor?
  1. A
    10 degrees
  2. B
    0.1 degree
  3. C
    5 degrees
  4. D
    1 degree
Question 46Single Answer
How should a protractor be stored to prevent damage?
  1. A
    In a protective cover
  2. B
    In a toolbox with other tools
  3. C
    Exposed to moisture
  4. D
    In direct sunlight
Question 47Single Answer
What is the main use of a protractor in a workshop?
  1. A
    Measuring lengths
  2. B
    Drilling holes
  3. C
    Measuring angles
  4. D
    Filing surfaces
Question 48Single Answer
What is the primary component of an ordinary depth gauge?
  1. A
    Depth bar
  2. B
    Vernier scale
  3. C
    Blade
  4. D
    Protractor
Question 49Single Answer
How should a try square be checked for accuracy?
  1. A
    Compare with a known 90-degree angle
  2. B
    Bend the blade
  3. C
    Submerge in water
  4. D
    Heat the blade
Question 50Single Answer
What is the purpose of a protractor’s scale?
  1. A
    Measuring depth
  2. B
    Measuring angles
  3. C
    Measuring length
  4. D
    Cutting metal
Important Questions Package

BTSC ITI Instructor Fitter Exam Online Question Bank Package

Buy BTSC ITI Instructor Fitter Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BTSC ITI Instructor Fitter question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.BTSC ITI Instructor (Fitter) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.BTSC ITI Instructor (Fitter) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.BTSC ITI Instructor (Fitter) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.BTSC ITI Instructor (Fitter) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.BTSC ITI Instructor (Fitter) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
6.BTSC ITI Instructor (Fitter) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
7.BTSC ITI Instructor (Fitter) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
8.BTSC ITI Instructor (Fitter) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam
Question for BTSC ITI Instructor (Fitter) 2026 - Quiz / Questions / MCQ - Toppersexam