To boost your performance in CGPSC Principal exam, practice each question regularly and with focus. Every question tests your subject understanding, so solve them one at a time. Taking a quiz improves your speed and accuracy. Practicing topic-wise MCQs. Students benefit greatly from reviewing questions with answer keys, which help clarify concepts and strengthen Questions knowledge for success in CGPSC Principal exams.
Latest CGPSC Principal Exam Question (Objective Questions), MCQ in English
Subjects : General Knowledge of Chhattisgarh, Civil Engineering
Question Bank CGPSC Principal Exam (Civil) - English
General Knowledge of Chhattisgarh
Q 1 :
Total area at present of Chhattisgarh state ?
A.1,30,194 km2
B.1,35,191 km2
C.3,02,772 km2
D.1,60,194 km2
Q 2 :
The Chhattisgarh state was formed ?
A.31st Oct., 1999
B.1st Nov., 1999
C.31st Oct., 2000
D.1st Nov., 2000
Q 3 :
The famous Chitrakot waterfall in Chhattisgarh state is situated in ?
A.Baghel Khand Plateau
B.Chhattisgarh Basin
C.Jashpoor-Samri Region
D.Dandkaranya Region
Q 4 :
Export of Iron-ore from Bastar is done from which of the following sea ports?
A.Chennai
B.Vishakhapatnam
C.Cochin
D.Mumbai
Q 5 :
In which of the following districts is the maximum Iron-ore produced in Chhattisgarh ?
A.Rajnandgaon
B.Bastar
C.Korea
D.Mahasamund
Q 6 :
In which of the following districts of Chhattisgarh is the Korba super power station established?
A.Raigarh
B.Korba
C.Sarguja
D.Raipur
Q 7 :
The only Jute industry of Chhattisgarh is located in which of the following districts ?
A.Raigarh
B.Korea
C.Jashpoor
D.Raipur
Q 8 :
In which of the following districts is Dandkaranya project located ?
A.Raipur
B.Jagdalpur
C.Bastar
D.Durg
Q 9 :
Total no. of M.L.A. seats in Chhattisgarh ?
A.60
B.80
C.90
D.93
Q 10 :
In which of the following districts in Chhattisgarh is Kutumsar cave situtated ?
A.Dantewara
B.Mahasamund
C.Korea
D.Bastar
Q 11 :
In which of the following districts is Maa danteshwari temple located ?
A.Kanker
B.Dantewara
C.Bastar
D.Raipur
Q 12 :
In which of the following districts was the Bhilai institute of technology in the memory of Seth Bal Krishan established in September, 1986 ?
A.Durg
B.Rajnandgaon
C.Raipur
D.Jagdalpur
Q 13 :
At which of the following rivers is Mini Mata project situated ?
A.Mahanadi
B.Hasdo
C.Eb
D.Shiv Nath
Q 14 :
Density of population (census 2001) in the state ?
A.130
B.154
C.156
D.160
Q 15 :
The capital of Chhattisgarh ?
A.Bilaspur
B.Raipur
C.Jagdalpur
D.Durg
Q 16 :
How many tehsils are there in Chhattisgarh state?
A.16
B.48
C.97
D.100
Q 17 :
How many universities are there in Chhattisgarh ?
A.2
B.3
C.7
D.5
Q 18 :
The Sex-Ratio (census 2001) in Chhattisgarh state ?
A.952
B.962
C.898
D.992
Q 19 :
The Rate of population increase (1991-2001) in Chhattisgarh was?
A.16.21
B.17.06
C.18.06
D.22.26
Q 20 :
The average height of the Dandakaranya region ?
A.200 metre
B.400 metre
C.800 metre
D.900 metre
Q 21 :
No. of habitated villages in Chhattisgarh ?
A.18,720
B.20,308
C.20,378
D.20,478
Q 22 :
The total no. of towns in Chhattisgarh ?
A.85
B.97
C.95
D.100
Q 23 :
Which of the following is situated in the North of tropic of cancer ?
A.Ramanujung
B.Ambikapur
C.Baikunthpur
D.Dareea
Q 24 :
At which of the following rivers is Chitrakot dam situated ?
A.Eb
B.Indravati
C.Shiv Nath
D.Jonk
Q 25 :
What is the percentage of forested land in Chhattisgarh ?
A.35.01
B.38.01
C.40.85
D.43.85
Q 26 :
Ari Dongari range of district Kanker produces Iron-ore. In which of the tehsils is this range situated ?
A.Bhanupratap Pur
B.Narharpur
C.Antagarh
D.Kanker
Q 27 :
Which district of Chhattisgarh state has maximum no. of tehsils ?
A.Janjgir
B.Rajnandgaon
C.Raipur
D.Durg
Q 28 :
In which of the following districts is Kosse cloth prepared by Kosta tribe?
A.Durg
B.Bastar
C.Raigarh
D.Korba
Q 29 :
Bristal and Panama are the main cigrettes which are manufactured in Chhattisgarh. Where are the Bristal cigrattes manufactured ?
A.In Durg
B.In Raigarh
C.In Bilaspur
D.In Raipur
Q 30 :
Where is the South-Eastern coal field Ltd ?
A.In Jagdalpur
B.In Bilaspur
C.In Durg
D.In Raipur
Q 31 :
In which of the following districts are Joggimara caves situated ?
A.Jashpoor
B.Sarguja
C.Bilaspur
D.Kavardha
Q 32 :
Where is the Bamleshwari temple situated ?
A.Dongargarh
B.Antagarh
C.Bishrampur
D.Bilaspur
Q 33 :
In which of the following districts is the maximum concentration of population ?
A.Raipur
B.Durg
C.Bilaspur
D.Bastar
Q 34 :
As per 2001 census the literacy rate of Chhattisgarh state is 65.18%. What is the literacy of male and female ?
A.50.28%, 30.24%
B.60.81%, 50.76%
C.65.38%, 69.70%
D.77.86%, 52.40%
Q 35 :
Which of the following tribes Dhanka is a sub tribe ?
A.Orang
B.Korba
C.Bhetra
D.Kamar
Q 36 :
In which of the following districts is the Cement Corporation of India factory not situated ?
A.Durg
B.Raipur
C.Janjgir
D.Raigarh
Q 37 :
What per cent of the arabe land in Chhattisgarh is main cultivation ?
A.43%
B.65%
C.35%
D.29%
Q 38 :
In which of the following districts Century is Mill of Birla situated ?
A.Raigarh
B.Raipur
C.Bilaspur
D.Durg
Q 39 :
Where is the Belladella Iron project situated ?
A.In Bacheli (Jagdalpur)
B.In Bastar
C.In Raigarh
D.In Raipur
Q 40 :
Where was the plastic complex in Chhattisgarh established ?
A.Korba
B.Dantewara
C.Raigarh
D.Raipur
Q 41 :
In which district of Chhattisgarh are the maximum no. of wild life sancturies ?
A.Sarguja
B.Dhamtari
C.Bilaspur
D.Korea
Q 42 :
In which of the following distircts are the maximum no. of forests in Chhattisgarh ?
A.Durg
B.Jashpoor
C.Sarguja
D.Dhamtari
Q 43 :
Which of the following is the smallest unit of democracy ?
A.Gram Panchayat
B.Janpad Panchayat
C.District Panchayat
D.None of these
Q 44 :
Which of the following are new districts created after the bifurcation of Bastar ?
A.Mahasamund and Dhamtari
B.Kanker and Dantewara
C.Kanker and Dhamtari
D.Kanker and Bastar
Q 45 :
Where was the High Court bench of Chhattisgarh established ?
A.In Raipur
B.In Bilaspur
C.In Durg
D.In Jagdalpur
Q 46 :
Who is the first Director General of Police in Chhattisgarh ?
A.Arun Kumar
B.S. M. Shukla
C.U. K. Sayal
D.Satyanand Misra
Q 47 :
Who among the following took the Oath as the first Governor of Chhattisgarh state ?
A.Dinesh Nandan Sahai
B.W. A. Sheshak
C.K. Shankar Narayan
D.Surjit Singh Barnala
Q 48 :
Which one of the following is the underground mechanised coal mine of the state ?
A.Sohagpur
B.Raipur
C.Korba
D.Manikpur
Q 49 :
Where is the Railway wagon (luggage) repairing centre ?
A.In Raisain
B.In Raipur
C.In Raigarh
D.In Sajapur
Q 50 :
Where is the matchbox factory in Chhattisgarh ?
A.Raigarh
B.Balaghat
C.Chhindwara
D.Bilaspur
Important Questions Package
CGPSC Principal Exam Online Question Bank Package
Buy CGPSC Principal Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in CGPSC Principal question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
CGPSC Principal Exam (Civil) Question Bank Book - English
One bag of Portland cement, 50 kg in weight, would normally have a bulk volume of
A.30 l
B.35 l
C.40 l
D.45 l
Q 52 :
AsCu, a preservative for wood, developed by the Forest Research Institute, Dehradun, comprises of chemicals:
A.1 : 1 : 1
B.1 : 2 : 3
C.1 : 2 : 4
D.1 : 3 : 4
Q 53 :
Consider the following statements related to autoclave bricks:
1.Less water absorption compared to other bricks.
2.Noise reduction
3.It is cheap compared to other types of bricks.
4.Requirement of bulk volume of mortar in joints being relatively less compared to other types of brick masonry.
5.Not recommended for outer walls.
Which of the above statements are relevant to the use of ‘autoclave’ bricks?
A.1, 2 and 4
B.1, 3 and 5
C.2, 3 and 4
D.2, 4 and 5
Q 54 :
The minimum number of annular rings to be seen in every 2.54 cm in the radial direction from the core for timber to be classified as ‘Dense’ is
A.10
B.20
C.25
D.30
Q 55 :
If the actual thickness of a brick masonry wall is 19 cm, its effective length is 2.70 m, its effective height is 2.82 m and its code specified stiffening coefficient is 1.2 then, for design considerations, the slenderness ratio of the wall will be taken as
A.11.8
B.12.4
C.14.2
D.14.8
Q 56 :
Consider the following forms of water in a hydrated cement paste:
1.Capillary water
2.Chemically combined water
3.Interlayer water
4.Adsorbed water
Which of the above forms of water will, on its/their removal, cause shrinkage of the paste?
A.1, 2 and 3
B.1, 2 and 4
C.2, 3 and 4
D.1, 3 and 4
Q 57 :
Consider the following statements:High early strength of cement is obtained as a result of
1.Fine grinding.
2.Decreasing the lime content
3.Burning at higher temperature
4.Increasing the quality of gypsum.
Which of the above statements are correct?
A.1 and 2
B.1 and 3
C.2 and 3
D.3 and 4
Q 58 :
Consider the following statements related to ‘composite mortar’:
1.Addition of lime to cement mortar improves its workability
2.Composite mortar is obtained by adding 10% by weight of cement and mixing with water.
3.Composite mortar is not preferred in tall buildings.
4.Mechanical grinding is essential for developing composite mortar.Which of the above statements are true in this case?
A.1, 2 and 3 only
B.1, 3 and 4 only
C.2, 3 and 4 only
D.1, 2, 3 and 4
Q 59 :
Consider the following statements related to ‘non-destructive testing’ of concrete:
1.Indentation test is used to assess the quality of concrete.
2.Resonant Frequency Method is based on a laboratory test.
3.Compressive strength of concrete is estimated through Pulse Velocity Measurement.
4.Dynamic modulus of Elasticity is determined by a Sonometer Test.
5.Thickness of concrete can be estimated by in-situ Rebound Hammer Test.
Which of the above statements are correct?
A.1, 2 and 3 only
B.1, 2 and 5 only
C.1, 2, 3 and 4 only
D.1, 2, 3, 4 and 5
Q 60 :
What is the amount of water required for a workable RC of mix 1 : 2: 4 by weight., when W/C is 0-60 and unit weight of concrete is 2400 kg/m3?
A.165 l
B.205 l
C.245 l
D.285 l
Q 61 :
Which IS code is used for classification of timber for seasoning purposes?
A.IS : 4970-1973
B.IS : 1708-1969
C.IS : 1141-1958
D.IS : 399-1963
Q 62 :
Consider the following with regard to the application of preservation of timber:
1.Increase in the life span of the member
2.Increase in the strength of the timber
3.Removal of moisture
4.Prevention of growth of fungi by killing them
Which of the above are correct?
A.1, 2, 3 and 4
B.2 and 4 only
C.1 and 4 only
D.2 and 3 only
Q 63 :
The plies in plywood are so placed that the grains of each ply are
A.Parallel to each other
B.At right angle to one another
C.45° oblique to adjacent grain
D.Not constrained by any consideration
Q 64 :
Which of the following is an ODD one as regards ‘requirement of good brick-earth’?
A.It must be free from lumps of lime
B.It should not be mixed with salty water
C.It must be non-homogeneous
D.It should not contain vegetable and organic matter
Q 65 :
The compressive strength of heavy-duty bricks, as per IS : 2980-1962, should not be less than
A.440 kg/cm2
B.175 kg/cm2
C.100kg/cm2
D.75kg/cm2
Q 66 :
Consider the following statements:
1.Brickwork will have high water tightness.
2.Brickwork is preferred for monument structures.
3.Bricks resist fire better than stones
4.Bricks of good quality shall have thin mortar bonds.
Which of the above statements are correct?
A.1 and 2
B.3 and 4
C.2 and 3
D.1 and 4
Q 67 :
Consider the following statements:A good soil for making bricks should contain
1.30% alumina
2.10% lime nodules
3.Only small quantity of iron oxides
4.15% magnesia
Which of the above statements are correct?
A.1 and 2 only
B.1 and 3
C.1, 2 and 4
D.2, 3 and 4
Q 68 :
Which compound of cement is responsible for strength of cement?
A.Magnesium oxide
B.Silica
C.Alumina
D.Calcium sulphate
Q 69 :
Which type of cement is recommended in large mass concrete works such as a dam?
A.Ordinary Portland
B.High Alumina
C.Low-heat Portland
D.Portland Cement
Q 70 :
Consider the following statements regarding ‘setting of cement’:
1.Low-heat cement sets faster than OPC.
2.Final setting time decides the strength of cement
3.Initial setting time of Portland Pozzollona is 30 minutes
4.Air-induced setting is observed when stored under damp conditions.
4.Addition of gypsum retards the setting time.
Which of the above statements are correct?
A.1, 2 and 3
B.2, 3 and 4
C.3, 4 and 5
D.2, 3 and 5
Q 71 :
Consider the following statements regarding ‘strength of cement’:
1.Strength test on cement is made on cubes of cement-sand mix.
2.Water to be used for the paste is 0.25 P, where P is the water needed for normal consistency.
3.The normal consistency is determined on Le Chatelier’s principle.
4.Cubes are cast in two layers in leak-proof moulds further compacted in each layer by vibration on a machine.
Which of the above statements are correct?
A.1 and 2
B.2 and 3
C.1 and 4
D.3 and 4
Q 72 :
Which of the following ingredients refer to binding material of mortar?
1.Cement
2.Lime
3.Sand
4.Ashes
Select the correct answer using the code given below.
A.1 and 4
B.3 and 4
C.1 and 2
D.2 and 3
Q 73 :
Consider the following statements:
1.Bricks in masonry are bound by mortar.
2.Mortars make brick damp-proof.
3.Strength of brick in masonry is improved by plastering.
4.Addition of lime improves workability.
5.Marine construction needs sulphate-resistant cement mortar.
Which of the above statements are relevant for ‘cement mortar’?
A.1, 2 and 3
B.2, 3 and 4
C.1, 4 and 5
D.3, 4 and 5
Q 74 :
Consider the following parameters of concrete:
1.Impermeability
2.Compactness
3.Durability
4.Desired consistency
5.Workability
Which of the above parameters are relevant for ‘water-cement ratio’?
A.4 and 5
B.1 and 2
C.2 and 4
D.3 and 5
Q 75 :
Consider the following statements:Presence of Na2O and K2O in concrete leads to
1.Expansive reaction in concrete
2.Cracking of concrete
3.Disruption of concrete
4.Shrinkage of concrete
Which of the above statements are correct?
A.1 and 2 only
B.2 and 3 only
C.1, 2 and 3
D.3 and 4
Q 76 :
The maximum total quantity of dry aggregate by mass per 50 kg of cement, to be taken as the sum of the individual masses of fine and coarse aggregates (kg), for M20 grade of concrete is
A.625
B.480
C.330
D.250
Q 77 :
Absorption capacity of an aggregate refers to the difference expresses in appropriate proportion in water content between
A.A wet aggregate and a dry aggregate
B.A dry aggregate and a wet aggregate
C.A saturated surface-dry aggregate and a dry aggregate
D.A saturated surface-dry aggregate and an over dry aggregate
Q 78 :
Consider the following statements concerning ‘elasticity of concrete’:
1.Stress-strain behavior of concrete is a straight line up to 10% ultimate stress.
2.Strain determination is obtained from tangent modulus.
3.Modulus of elasticity of concrete is also called as secant modulus.
Which of the above statements are correct?
A.1, 2 and 3
B.1 and 3 only
C.1 and 2 only
D.2 and 3 only
Q 79 :
Consider the following statements :The addition of CaCl2 in concrete results in
1.Increased shrinkage
2.Decreased setting time
3.Decreased shrinkage
4.Increased setting time
Which of the above statements are correct?
A.1 only
B.2 and 3
C.3 and 4
D.1 and 2
Q 80 :
Which of the following statements are correct ?
1.Knots in a tree affect the continuity of fibres.
2.Nail knots do not influence the strength of timber.
3.Druxiness of wood is not a defect.
4.Tall trees with twisted fibers give good timber for poles.
A.1, 2, 3 and 4
B.1, 2 and 4 only
C.1, 2 and 3 only
D.2, 3 and 4 only
Q 81 :
Excrescences in wood are
1.Defects found in trees
2.Formed due to injuries inflicted on trees when they are growing
3.Defects which render wood suitable as firewood only
A.1, 2 and 3
B.1 and 2 only
C.1 and 3 only
D.2 and 3 only
Q 82 :
What treatment is adopted for making timber fire-resistant?
A.ASCU treatment
B.Abel’s process
C.Creosoting
D.Tarring
Q 83 :
Deterioration of structure of timber due to dry rot is:
1.Caused by fungi
2.Due to dry-spell after heavy rains
3.Due to attack of termites
4.ndicated by surface stripes on scantlings
A.1 and 2
B.3 and 4
C.2 and 3
D.1 and 4
Q 84 :
Alternate wetting and drying of timber :
1.Results in shrinkage and swelling
2.Brings about wet rot onset
3.Increases the durability
4.Causes transmission of spores from germination
A.1, 2, 3 and 4
B.1, 2 and 4 only
C.1, 2 and 3 only
D.2, 3 and 4 only
Q 85 :
As per I.S. classification, the minimum compressive strength of a first class brick should be
A.75 kg/cm3
B.100kg/cm3
C.125 kg/cm3
D.150 kg/cm3
Q 86 :
When provided with alternating courses of (a) all headers and (b) all stretchers, the front elevation of such brick masonry is designated as
A.English bond
B.Single Flemish bond
C.Double Flemish bond
D.Rat-trap bond
Q 87 :
I.S. code specifies that the compressive strength of brick shall be determined by keeping the brick:
1.On edge
2.On bed
3.After soaking in water for 2 hrs
4.After soaking in water for 24 hrs
A.1 and 2
B.2 and 3
C.3 and 4
D.2 and 4
Q 88 :
Soundness test of cement is carried out to determine its
A.Alumina content
B.Iron oxide content
C.Free lime content
D.Durability under sea water
Q 89 :
The objectives of producing cement include:
1.Incorporating industrial wastes
2.Increasing free lime
3.Increasing fineness
4.Saving energy needed in the process
A.1, 2, 3 and 4
B.1, 3 and 4 only
C.1, 2 and 4 only
D.2, 3 and 4 only
Q 90 :
A mild steel rod tapers uniformly from 24 mm mm dia. over its length of 400 mm. The rod when held vertical is subjected to an axial tensile load of 12 kN. E = 2 × 105 N/mm2. The extension of the rod in mm would be:
A.3
2
B.2
3
C.3
D.1
3
Q 91 :
Two different liquids are flowing through different pipes of the same diameter. In the first pipe, the flow is laminar with centerline velocity,Vmax.1,Whereas in the second pipe, the flow is turbulent. For turbulent flow, the average velocity is 0.82 times the centerline velocity,vmax.2 . For equal volumetric flow rates in both the pipes, the ratio Vmax.1/Vmax.2(up to two decimal place) is_____.
A.1.64
B.2.45
C.0.25
D.1.44
Q 92 :
Poisson’s ratio of a material is 0.3. Then the ratio of Young’s modulus to bulk modulus is
A.0.6
B.0.8
C.1.2
D.1.4
Q 93 :
For a gas phase cracking reaction A→B+C at 300รขโฦ , the Gibbs free energy of the reaction at this temperature is รขหโ G°= -2750J/mol . The pressure is 1 bar and the gas phase can be assumed to be ideal. The universal gas constant =8.314J/mol. K. The fractional molar conversion of A at equilibrium is________.
A.0.44
B.0.50
C.0.64
D.0.80
Q 94 :
Which of the following statements are correct ?
1.In a ductile material elastic deformation is more predominant than plastic one.
2.Brittleness is not an absolute property of a metal.
3.Rate of loading has no influence in changing the behavior of a metal from ‘ductile’ to ‘brittle’ at low temperatures
4.Under hydrostatic compression, a brittle metal may change into a ductile one.
A.1 and 2
B.2 and 3
C.3 and 4
D.2 and 4
Q 95 :
The total deflection of a structure when subjected simultaneously to different sets of loading is equal to the sum of the deflections under each such set of loads as if acting separately on the structure. Which one the following justifies this statement?
A.Elastic limit is not exceeded
B.Elastic limit including buckling is not exceeded
C.Limit state is not exceeded
D.Proportional limit without buckling is not exceeded
Q 96 :
A rectangular bar of cross-sectional area a is subjected to an axial tensile load P. The maximum shear stress will occur on a plane at X° to any normal cross-section where X° is
A.90°
B.27°
C.180°
D.45°
Q 97 :
A solid circular shaft has been subjected to a pure torsion moment. The ratio of maximum shear stress to maximum normal stress at any point would be
A.1 : 2
B.1 : 1
C.2 : 3
D.2 : 1
Q 98 :
Which of the following statements are correct?
1.All load carrying members transmit load through basic modes of tension, compression, torsion and shear only.
2.Beams carry transverse loads.
3.Combined loading is a complicated loading.
4.Nature of internal forces decides the aspect of combines loading.
A.1 and 2
B.2 and 3
C.3 and 4
D.2 and 4
Q 99 :
Identify the WRONG statement amongst the following:
A.steam distillation is used for mixtures that re immiscible with water.
B.Vacuum distillation is used for mixtures that are miscible with water.
C.Steam distillation is used for mixtures that are miscible with water.
D.vacuum distillation columns have larger diameter as compared to atmospheric columns for the same throughout
Q 100 :
Which of the following statements are correct?
1.Experimental results on thin-walled tubes show that maximum normal stress theory is valid.
2.Normal-stress theory is valid in case of brittle materials.
3.In case of pure shear, St. Venant’s theory is more valid than other theories.
4.Tresca’s theory is very closely substantiated by experimental results.
5.In maximum stress theory, the yield locus is a hexagon.
A.1, 2 and 3
B.2, 4 and 5
C.1, 2 and 4
D.2, 3 and 4
Q 101 :
A thin cylindrical shell made of mild steel plate is 1000 mm in diameter. It is to be subjected to an internal pressure of 2 N/mm2. If the material yields at 200N/mm2, the thickness of the plate in mm on the basis of Rankine’s theory of failure with assuming a factor of safety of 3 would be
A.10
B.12
C.15
D.18
Q 102 :
Which of the following can change if only the catalyst is changed for a reaction system?
A.Enthalpy of reaction
B.Activation energy
C.Free Energy of the reaction
D.Equilibrium constant
Q 103 :
Which of the following loads should be applied on a simply supported beam, so that the shear force is constant throughout its span?
A.U.D.L. over the entire span.
B.Two concentrated loads equally spaced in the span.
C.A central concentrated load and a U.D.L. over the entires pan.
D.A couple anywhere in the span.
Q 104 :
A simply supported rolled steel joist of I-section has flange width 250 mm and overall depth 600 mm. Its moment of inertia IXX = 12 × 106 mm4. The steel joist is used as a beam over a simply supported span of 6m. It carries a load of 40 kN/m including its self weight throughout the span. The maximum stress induced in the beam in N/mm2 due to bending would be
A.30
B.90
C.45
D.60
Q 105 :
Which of the following terms represents the torque that produces a twist of one radian in a shaft of unit length?
A.Torsional stress
B.Torsional rigidity
C.Flexural rigidity
D.Moment of resistance
Q 106 :
A 60 mm dia. shaft is subjected to a torque of 6 kN-m. C = 8 × 104 N/mm2. The maximum shear stress induced in the shaft in N/mm2will be
A.8000
92
B.4000
9
C.12000
9
D.16000
9
Q 107 :
A water main 160 cm dia. contains water at a pressure head of 200m. Take weight of water to be 1000 kg/m3. The thickness of the metal shell required for the water main, given that the maximum permissible stress in the metal is 400kg/cm2, will be
A.1 cm
B.2 cm
C.3 cm
D.4 cm
Q 108 :
The radial splits which are wider on the outside of the log and narrower towards the pith are known as
A.Star shakes
B.Annular rings
C.Cup shakes
D.Hear shakes
Q 109 :
Consider the following distinguishing characteristics of hardwood:
1.They have distinct annular rings.
2.They are not resinous.
Which of these characteristics of hardwood is/are correct?
A.1 only
B.2 only
C.Both 1 and 2
D.Neither 1 nor 2
Q 110 :
Consider the following statements on the specific gravity of wood:
1.It is always greater than 2.
2.It is less than 1.
3.It is not dependent upon temperature and equilibrium moisture content.
Which of these statements are correct?
A.1, 2, 3 and 4
B.1 and 3 only
C.2 and 3 only
D.2 and 4 only
Q 111 :
The age of a log of timber can be estimated by
A.Diameter of pith
B.Thickness of bark
C.Number of annular rings
D.Number of medullary rays
Q 112 :
Consider the following statements:Seasoning of timber results in
1.Increased strength
2.Increased durability
3.Reduced resilience
4.Increased dimensional stability
Which of these statements are correct?
A.1, 2 and 4
B.1, 2 and 3
C.1, 3 and 4
D.2, 3 and 4
Q 113 :
Match List-I and List-II and select the correct answer using the code given below the lists: List-I List-II
Plywood 1. Furniture
Fiberboard 2. Cantilever arches
Laminated lumber 3. Insulation
Commercial blockboard 4. Lining of form-work in concrete Codes:
A.A B C D
1 2 3 4
B. 4 3 2 1
C.4 2 3 1
D.4 2 3 1
Q 114 :
Consider the following statements:Perforated bricks are preferred in construction since
1.They are lighter
2.They are stronger than class 1 bricks
3.They have heat-insulating properties
4.They are cheaper and need less mortar
Which of these statements are correct?
A.1, 2, 3 and 4
B.2 and 3 only
C.1 and 3 only
D.3 and 4 only
Q 115 :
The standard size of a brick is
A.20 cm × 10 cm × 10 cm
B.19 cm × 9 cm × 9 cm
C.18 cm × 9 cm × 9 cm
D.18 cm × 10 cm × 10 cm
Q 116 :
Consider the following statements:More than 6% magnesium oxide by weight in cement results in
1.High early strength and high heat generation
2.Less tendency towards volume change and formation of cracks
Which of these statements is/are correct?
A.1 only
B.2 only
C.Neither 1 nor 2
D.Both 1 and 2
Q 117 :
Fineness if cement is measured in the units of
A.Volume/mass
B.Mass/volume
C.Area/mass
D.Mass/area
Q 118 :
The initial setting time of cement depends most on
A.Tricalcium aluminate
B.Tricalciumaluminoferrite
C.Dicalcium silicate
D.Dicalcium silicate
Q 119 :
Consider the following statements:Sand in cement mortar is used for
1.Increasing the strength
2.Reducing the shrinkage
3.Decreasing the surface area of the binding material
4.Decreasing the quantity of cement
Which of these statements are correct?
A.1, 2 and 4
B.1, 2 and 3
C.1, 3 and 4
D.2, 3 and 4
Q 120 :
Consider the following statements:
1.The compressive strength of concrete decreases with increase in water-cement ratio of the concrete mixture.
2.Water is added to the concrete mix for hydration of cement and workability.
3.Creep and shrinkage of concrete are independent of the water-cement ratio in the concrete mix.
Which of these statements are correct?
A.1 and 4 only
B.1 and 3 only
C.2 and 3 only
D.1, 2 and 3
Q 121 :
According to the Indian Standard Specifications, concrete should be cured under a humidity of
A.90%
B.80%
C.60%
D.70%
Q 122 :
Consider the following statements:In a typical compression test with a cylindrical concrete specimen, failure is initiated by
1.Crushing in compression
2.Inclined shear failure
3.Longitudinal tensile cracks
Which of these statements are correct?
A.1 only
B.2 only
C.3 only
D.1, 2 and 3
Q 123 :
If one intends to obtain the best workability of concrete, the preferred shape of aggregate is
A.Round
B.Annular
C.Triangular
D.Flinty
Q 124 :
Consider the following statements as regards rheology of concrete:
1.It deals with strength of concrete.
2.It deals with deformation in concrete.
3.It is the study of deformation and flow of concrete.
4.It deals with rate of shear and shear stress in concrete.
Which of these statements are correct?
A.1, 2, 3 and 4
B.3 and 4 only
C.2 and 3 only
D.1 and 2 only
Q 125 :
Consider the following for durability of well-graded concrete:
1.The environment
2.Cover to embedded reinforcement
3.Shape and size of concrete member
Which of these are correct?
A.1 and 2 only
B.1 and 3 only
C.2 and 3 only
D.1, 2 and 3
Q 126 :
Consider the common methods related to testing of concrete:
1.Consistency
2.Compacting factor
3.Vee-Bee
4.Setting time
5.Slump
Which of these methods refer to measuring workability ofconcrete?
A.1, 2 and 3
B.1, 2 and 5
C.2, 3 and 4
D.2, 3 and 5
Q 127 :
Gypsum is added into the raw materials during manufacture of cement so that the final product exhibits
A.Retarded initial setting time
B.Improved mouldability for cornices, etc
C.Increases compressive strength
D.Augmented bond strength
Q 128 :
Consider the following constituents of a high performance concrete (HPC):
1.Cement
2.Fine aggregate
3.Coarse aggregate
4.Water
5.Mineral admixture
6.Chemical admixture
Which of these constituentsare relevant for HPC?
A.1, 2, 3, 4, 5 and 6
B.1, 2, 3, 4 and 5 only
C.2, 3, 4, 5 and 6 only
D.1, 2, 3, 5 and 6 only
Q 129 :
A specimen is subjected to a pure shear stress regime of intensity.The resulting tensile and compressive stresses, which occur on planes inclined at 45° to the direction of the shear stresses, would be
A.T
B.T
2
C.T2
D.T3
Q 130 :
For a given elastic material, the Elastic modulus E is 210 GPa and its Poisson’s ratio is 0.27. What is the approximate value if its modulus of Rigidity ?
A.105 GPa
B.83 GPa
C.159 GPa
D.165 GPa
Q 131 :
Which of the following is not a basic type of strain ?
A.Compressive strain
B.Shear strain
C.Area strain
D.Volume strain
Q 132 :
Young's Modulus of elasticity is
A.Tensile stress / Tensile strain
B.Shear stress / Shear strain
C.Tensile stress / Shear strain
D.Shear stress / Tensile strain
Q 133 :
Which of the following stresses is measured on inclined surface in Mohr’s Circle Method ?
A.Principal stress
B.Normal stress
C.Tangential stress
D.Maximum stress
Q 134 :
Hooke's law is applicable within
A.Elastic limit
B.Plastic limit
C.Fracture point
D.Ultimate strength
Q 135 :
Lead, as a material used in construction, has E = 15 GPa and K = 50 GPa. What is its Poisson’s ratio?
A.0.225
B.0.30
C.0.40
D.0.45
Q 136 :
Crushing strength of good building stone should be more than:
A.500 kg/cm2
B.1000 kg/cm2
C.1400 kg/cm2
D.2000 kg/cm2
Q 137 :
Two planks each of 50 mm × 50 mm section are glued together along the length to form as section 50 mm × 100 mm; and used as a beam. If the shear force at the section is 1000 N, what is the maximum shear stress on the glue?
A.0.15 MPa
B.0.3MPa
C.0.6MPa
D.2.4MPa
Q 138 :
The probability distribution taken to represent the completion time in PERT analysis is
A.Gamma distribution
B.Normal distribution
C.Beta distribution
D.Log-normal distribution
Q 139 :
The state of stress at a point in 2-D stress system is characterized by direct stresses of 40 MPa compressive and 80 MPa tensile, on mutually perpendicular planes. Shear stress is absent on these planes. The maximum shear stress sat this point (along a duly identified plane) is
A.20 MPa
B.40MPa
C.60MPa
D.80MPa
Q 140 :
An electrical resistance strain rosette indicates strain of -400, +800 and +500 along the x,y and 45° axes. What is the shearing ratio yxy?
A.100
B.800
C.600
D.-200
Q 141 :
In a diagonal scale only
A.Units can be shown
B.Units, tenths can be shown
C.Units, tenths, hundredths can be shown
D.Units, tenths, hundredths and thousandths can be shown
Q 142 :
A cylindrical pressure vessel is 1200 mm in diameter. It is made of rolled mild steel plate. The vessel is subjected to an internal pressure of 2 N/mm2. If the material yields at 200 N/mm2, what should be the minimum safe thickness of the plate, based on Maximum Principle Stress Theory?
A.18 mm
B.15 mm
C.12 mm
D.9 mm
Q 143 :
The constituent compound in Portland cement which reacts immediately with water, and also sets earliest, is
A.Tricalcium silicate
B.Dicalcium silicate
C. Tricalcium aluminate
D. Tetracalcium aluminoferrite
Q 144 :
A simply subjected beam of length 4 m is subjected to a uniformly distributed load of 2 kN/m. What is the maximum shear stress is the cross-section is rectangular, 100 mm wide and 200 mm deep?
A.0.2 N/mm2
B.0.1 N/mm2
C.0.4 N/mm2
D.0.3 N/mm2
Q 145 :
A mild steel structural section is an unsymmetrical I-section, with the greater width at the top and the smaller width at the bottom. The overall depth of the beam is 300 mm, and the flange stresses at the top and the bottom of the beam are 150 N/mm2and 50 N/mm2 respectively. What is the height of the neutral axis of the beam from its bottom?
A.125 mm
B.100 mm
C.75 mm
D.50 mm
Q 146 :
The surveying used to determine additional details such as boundaries of fields, is called
A.City surveying
B.Location surveying
C.Cadastral surveying
D.Topographical surveying
Q 147 :
A circular shaft of diameter ‘D’ is made of a material for which the Young’s modulus of elasticity is ‘E’ and Poisson’s ratio is ‘v’. the ratio of flexural rigidity to torsional rigidity for the shaft is
A.4(1+v)
B.1.5(1-2v)
C.(1+v)
D.0.25(1+v)
Q 148 :
A closely coiled helical spring of round steel wire 5mm in diameter having 12 complete coils of 50 mm mean diameter is subjected to an axial load of 100 N. Modulus of rigidity of the spring is 80kn/mm2. What is the deflection of the spring?
A.12 mm
B.24 mm
C.36 mm
D.48 mm
Q 149 :
What is the shear stress at the neutral axis in a beam of isosceles triangular section with a base of 40 mm and height 20 mm subjected to a shear force of 2 kN?
A.3 MPa
B.6MPa
C.10MPa
D.20MPa
Q 150 :
A beam of square cross-section is placed such that its neutral axis coincides with its diagonal, and it is subjected to a shear force F. What is the ratio of the maximum shear stress to the shear stress at the neutral axis?
