As per IRC (Indian Roads Congress) recommendation, what will be the designed stopping sight distance (in metres) at the vehicle speed of 80 km/h on a rural highway ?

No deduction is made in the quantity estimation for plastering work in cement mortar for openings having size up to :

What is the height of slump cone mould used for testing the workability of the concrete ?

Select the correct option with regard in the following statements (S1, S2) pertaining to pavements .
S1 : Present serviceability index is used for the functional evaluation of pavement surface condition
S2 : Rigid pavements are less affected by temperature variations than flexible pavements

If the quadrantal bearing of a line AB is S 31'35' E, then its whole circle bearing is equal in :

The overflowing sheet of water on a weir is called :

According to IS 456 - 2000, what is the slump of a medium degree of workability of concrete if planed in heavily reinforced sections like slabs, beams, walls, columns ?

Which of the following is Kharif season in India ?

The estimated value of a built - up property at the end of its useful life without dismantled is called :

The amount of cement required for 100 m² area, of damp proof course with 2.5 cm thinkness, in with proportion of 1: 2 : 4 (cement : sand : aggregate) will be :

Select the correct statement related to increasing the carbon content in steel from 0.2 to 0.9 percent .

Which of the following laws states that pressure or intensity of pressure at a point is static fluid is equal in all directions ?

The determination of plasticity index and the percentage by weight of clay mineral finer than 2 µ present in the soil were done for two soil samples A and B. The ratio of plasticity index to the percentage of clay size particle for the samples A and B are given in the table .
Soil sample      Ratio of plasticity index to percentage of clay size particle
Sample A          Less than 0.75
Sample B          Greater than 1.25 The two soil sample A and B are classified as

Which of the following compounds of cement is responsible for early strength ?

According to SP : 27 - 1984, the thickness of slab or RC slab shall be measured to the nearest of :

Classify the following pollutants as primary pollutants (PP) and secondary pollutants (SP). Ozone, Carbon monoxide, Particulate matter, photochemical smog, Nitrogen oxides, Aerosol/mist, Hydrocarbons, Perory - Acetyl - Nitrate, Sulphur dioxide.

Saturated unit weight of soil is the ratio of : 

Identify the test to be conducted for the determination of the modulus of subgrade reaction in pavement design .

In limit state design, the design bond stress for deformed bars (conforming to IS 1786) for M20 concrete mentioned in IS 456 : 2000 is (in N/mm² units) :

Which of the following can be considered as a taking off point in road planning in India ?

The following two statements pertain to a simply supported under reinforced concrete beam. Select the correct option with regard is these statements .
1. The failure of the beam takes place due to the yielding of steel .
2. The moment of resistance of the beam is more than that of the balanced section of the beam .

A continuous beam ABC with span AB = BC = L is shown in the figure. Support A is fixed type, and supports B and C are roller type. The kinematic indeterminacy of the beam is :

The soils transported and deposited by a river or a stream care called :

What is the mechanical extra widening required for a two-lane pavement of width 7 m on a horizontal curve of radius 250 m, if the longest wheel base of a vehicle expected on the road is 5 m with a design speed of 70 km/h ?

The following are some of the errors that area associated with a total station survey work. Vertical collimation error, Centering error, Horizontal collimation error, Eccentricity error Categorize the given errors as those due to temporary adjustments (T) and permanent adjustments (P).

According to IS 800 : 2007, identify the property which is considered as a mechanical property of structural steel, important in design .

Which of the following methods is NOT used for measuring air content in fresh concrete ?

Which of the following methods is NOT used for the calculation of depreciation of a structure ?

The failure of an over reinforced concrete beam is due to :

In which type of estimate is 'Court yard' NOT considered ?

Match the items in List 1 (name of quantities) with those in List 2 (unit of quantities in the SI system). Use codes in List for matching .
​ List 1                                   List 2
M. Dynamic viscosity         1. N/m
N. Kinematic viscosity        2. N.m
O. Surface tension             3. N.s/m²
P. Energy                            4. m²/s

A reinforced concrete beam is subjected to the following bending moments .
Moment due to dead load = 50 kNm
Moment due to live load = 50 kNm
Moment due to seismic load = 20 kNm
The design bending moment for limit state of collapse is :

In a workshop shade, trusses are spaced at 4 m centre to centre. The purlins are spaced at 1.4 m centre to centre along the slope of 30⁰. The (Dead Load + Live load) is 3 kNm² and the wind load in 5 kNm². The vertical and the inclined point loads, respectively, will be :

What will be the percentage of passing aggregate for the grading zone 1 of sieve size 1.18 mm ?

The annual or periodical payment for repayment of the capital amount invested on a property for a specified period is known as :

Among the following river training works, which are aligned either parallel or at an angle to the banks, identify the one having a difference in alignment when compared to others :

The test commonly to determine the grade of bitumen in terms of its hardness is :

A level section has formation width of 10 m, side slope of 1 : 2 (vertical : horizontal) and central height of 2 m. Determine the quantity of earthwork required for a 1 km length of formation (in m³) .

Which type of odour characteristic is NOT used for classifying odour of a given water sample as per IS 3025 (part-5) 1983 ?

The liquid limit and plastic limit of clay materials is 45% and 25% respectively, what is the activity of clay materials if 20% by weight of particles of size less than 2 microns ?

Among the following corrections applied for tape measurement, identify the correction which is NOT always negative in sign :

A village has a population of 200 with as average rate of water demand as 100 litre per capita per day. A rapid sand filter having an average filtration rate of 100 litre/hour/m² is to be designed for water treatment. The area of rapid sand filter required is : (Take the ratio of maximum demand to average demand as 1.5.)

If the bearing of the side AB of a regular hexagon traverse ABCDFFA shown in the figure is 36^o45', the bearing of the adjacent side BC of the traverse is :

​

Pigment volume concentration (PVC) of paint is defined as :

The Indian Roads Congress (IRC) was founded in the year :

In a leveling survey work, the first staff reading taken in a staff station after shifting the instrument and the last staff reading taken to a staff sation before the instrument in shifted are, respectively :

Which of the following Indian Standard Codes provides conservatively imposed loads for buildings and structures ?

Activity of soil is ratio of the plasticity index to :

Kor watering in irrigation is defined as :

What is a SI unit for dynamic viscosity ?