Latest DSSSB Fitter Exam Question (Objective Questions), MCQ in English
Subjects : General Awareness, General Intelligence & Reasoning Ability, Arithmetical & Numerical Ability, Test of Hindi Language & Comprehension, Test of English Language & Comprehension, Fitter
Question Bank DSSSB Fitter (Grade 2) Exam - English
Kurukshetra a journal on rural development is published by
A
Ministry of Finance
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 3Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 4Single Answer
In ruby laser, the stimulated emission is due to transition from
A
metastable state to any lower state
B
any higher state of lower state
C
metastable state to ground state
D
any higher state to ground state
Question 5Single Answer
10-6 M NaOH is diluted 100 times. The pH of the diluted base is
A
between 7 and 8
B
between 5 and 6
C
between 6 and 7
D
between 10 and 11
Question 6Single Answer
The respiratory quotient during cellular respiration would depend on
A
the nature of enzymes involved
B
the nature of the substrate
C
the amount of carbon dioxide released
D
the amount of oxygen utilised
Question 7Single Answer
Which Delhi Sultan captured Qutub Minar while it was under construction?
A
Iltutmish
B
Alauddin Khalji
C
Qutub-ud-din Aibak
D
Muhammad Tughlaq
Question 8Single Answer
Where did the First Battle of Panipat take place?
A
Panipat
B
Delhi
C
Kurukshetra
D
Agra
Question 9Single Answer
Who built the Jama Masjid of Delhi?
A
Shah Jahan
B
Jahangir
C
Akbar
D
Aurangzeb
Question 10Single Answer
The iconic Humayun's Tomb was built by:
A
Babur
B
Humayun
C
Hamida Banu Begum
D
Akbar
Question 11Single Answer
The Iron Pillar near Qutub Minar was originally from:
A
Kanauj
B
Mathura
C
Ujjain
D
Pataliputra
Question 12Single Answer
"Who said, 'India was a parrot unto itself'?
A
Malik Muhammad Joyce
B
Raskhan
C
Rich Khusrow
D
Rich Hasan
Question 13Single Answer
What was the real name of Amir Khusro?
A
Muhammad Hasan
B
Muhammad Hussain
C
Muhammad Khusrow
D
Muhammad Mine
Question 14Single Answer
Which is the national game of Bhutan ?
A
badminton
B
basketball
C
football
D
archery
Question 15Single Answer
When was the Constituent Assembly of India formed?
A
1946
B
1947
C
1948
D
1950
Question 16Single Answer
Who was the Chairman of the Drafting Committee of the Indian Constitution?
A
Dr. Rajendra Prasad
B
Dr. B.R. Ambedkar
C
Jawaharlal Nehru
D
Sardar Vallabhbhai Patel
Question 17Single Answer
Who is known as the "Father of the Indian Renaissance" ?
A
Raja Ram Mohan Roy
B
Swami Vivekananda
C
Rabindranath Tagore
D
Mahatma Gandhi
Question 18Single Answer
Which country holds the BRICS Chairmanship in 2026?
A
Brazil
B
Russia
C
China
D
India
Question 19Single Answer
What is the theme of India’s BRICS Chairmanship 2026?
A
Inclusive Growth for All
B
Sustainable Global Economy
C
One Earth One Future
D
Building for Resilience, Innovation, Cooperation and Sustainability
Question 20Single Answer
Where was the BRICS Foreign Ministers' Meeting held in May 2026?
A
Mumbai
B
Hyderabad
C
Bengaluru
D
New Delhi
General Intelligence & Reasoning Ability
Question 21Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 22Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 23Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 24Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 25Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 26Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 27Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 28Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 29Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 30Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’ and if no such word can be formed your answer is ‘B’.
A
V
B
T
C
E
D
A
E
B
Question 31Single Answer
If each alternate letter beginning with the first in the word WORKING is replaced by the next letter in the English alphabet and each of the remaining letters is replaced by the previous letter in the English alphabet, which of the following will be the fourth from the right and after the replacement ?
A
N
B
Q
C
J
D
M
E
None of these
Question 32Single Answer
How many pairs of letters are there in the word ‘SHIFTED’ each of which has as many letters between its two letters as there are between in the English alphabet?
A
None
B
One
C
Two
D
Three
E
None of these
Question 33Single Answer
Statement: Is common currency a necessary ingredient for Europe’s growth ?
Arguments :
I. Yes, A common currency will enable entire Europe to market itself as one .
II. No, Similar experiments by Latin America countries have not affected their economies .
A
The only argument I is strong
B
Only argument II is strong
C
Either I or II is strong
D
Neither I nor II is strong
Question 34Single Answer
If it is possible to make only one meaningful word with the first, the fifth, the sixth, the tenth and the eleventh letters of the word EXCEPTIONAL using each letter only once, first letter of that word is your answer. If no such word can be made formed your answer is ‘X’ and if more than one such word can be formed your answer is ‘Y’.
A
P
B
L
C
T
D
X
E
Y
Question 35Single Answer
How many meaningful English words can be formed with the letters RAE using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 36Single Answer
How many such pairs of letters are there in the word WONDERS, each of which has as many letters between its two letters as there are between them in the English alphabet?
A
One
B
Two
C
Three
D
Four
E
More than four
Question 37Single Answer
If it is possible to make only one meaningful English word from the second, the fifth, the seventh and the eighth letters of the word PHYSICAL, using each letter only once, second letter of that word is your answer. If more than one such word can be formed your answer is M. if no such word can be formed your answer is N.
A
I
B
A
C
L
D
M
E
N
Question 38Single Answer
How many such pairs of letters are there in the word JUSTIFY, each of which have as many letters between them in the word as they have between them in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 39Single Answer
If the alphabets are assigned values as A=3, D=6, G=8, I=2, L=4 and T=5 then what is the sum of values of all the alphabets in the word DIGITAL?
A
26
B
28
C
30
D
32
E
None of these
Question 40Single Answer
How many such pairs of letters are there in the word EDUCATION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Arithmetical & Numerical Ability
Question 41Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 42Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 43Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 44Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 45Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 46Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 47Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 48Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 49Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 50Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Important Questions Package
DSSSB Fitter Exam Online Question Bank Package
Buy DSSSB Fitter Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in DSSSB Fitter question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
DSSSB Fitter (Grade 2) Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
2.
DSSSB Fitter (Grade 2) Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
3.
DSSSB Fitter (Grade 2) Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
4.
DSSSB Fitter (Grade 2) Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
Arithmetical & Numerical Ability
Question 51Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 52Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 53Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 54Single Answer
Convert 0.0909… into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 55Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Question 56Single Answer
Which is smaller ?
A
9/11
B
7/9
C
Equal
D
Cannot compare
Question 57Single Answer
Convert 0.5777… into fraction ?
A
26/45
B
52/90
C
13/22
D
5/9
Question 58Single Answer
Convert 0.81 into fraction ?
A
81/100
B
9/10
C
8/9
D
9/11
Question 59Single Answer
(63)2 – (12)2 =?
A
3528
B
3852
C
3582
D
3825
Question 60Single Answer
Which is greater ?
A
13/17
B
11/14
C
Equal
D
Cannot compare
Test of Hindi Language & Comprehension
Question 61Single Answer
शुद्ध वर्तनी का चयन कीजिए
A
अधम्र
B
अध्रम
C
अधर्म
D
अध्रिम
Question 62Single Answer
शुद्ध वर्तनी का चयन कीजिए
A
स्थायि
B
स्थायी
C
स्थाई
D
स्थाइ
Question 63Single Answer
वर्तनी की दृष्टि से सही शब्द है?
A
महत्व
B
महतव
C
महत्तव
D
महतत्व
Question 64Single Answer
निम्नलिखित में से शुद्ध छांटिए?
A
आयुष्मान
B
आयुश्मान
C
आयुशमान
D
आयुश्यमान
Question 65Single Answer
शुद्ध शब्द नहीं हैं?
A
कवियत्री
B
कौसल्या
C
एश्वर्य
D
श्रृंगार
Question 66Single Answer
शुद्ध वर्तनी है -
A
पूज
B
पुजय
C
पूज्य
D
पुज्य
Question 67Single Answer
शुद्ध वर्तनी है -
A
अनुसरण
B
अनूशरणन
C
अनुशरण
D
अणुशर
Question 68Single Answer
किस क्रमांक में सभी शुद्ध हैं?
A
एक्य,साप्ताहिक
B
आजीविका,आशीर्वाद
C
आर्शिवाद ,अनूकूल
D
निरिक्षण ,कृपालु
Question 69Single Answer
'उज्वल' शब्द का शुद्ध रूप है ?
A
उज्जव
B
उज्ज्ल
C
उज्ज्वल
D
उजवल
Question 70Single Answer
निम्नलिखित प्रश्न में चार वैकल्पिक वर्तनियाॅ दी गई है?
A
जागृत
B
जाग्रति
C
जाग्रित
D
जाग्रत
Question 71Single Answer
निम्नलिखित प्रश्न में चार वैकल्पिक वर्तनियाॅ दी गई है?
A
उन्नति
B
उनति
C
उन्ती
D
उनती
Question 72Single Answer
निम्नलिखित प्रश्न मे चार वैकल्पिक वर्तनियाॅ दी गई है?
A
अनुशहरण
B
अनोसरण
C
अनुसरन
D
अनुसरण
Question 73Single Answer
'पृथ्वीराज रासो' किस काल की रचना है ?
A
आदिकाल
B
रीतिकाल
C
भक्तिकाल
D
आधुनिक काल
Question 74Single Answer
हिन्दी की उत्पत्ति किस भाषा से हुई है?
A
प्राकृत
B
संस्कृत
C
शौरसैनी अपभ्रंश
D
मागधी
Question 75Single Answer
राजभाषा आयोग के प्रथम अध्यक्ष थे ?
A
बी. जी. खरे
B
राजा लक्ष्मण सिंह
C
प्रताप नारायण मिश्र
D
इंशाअल्ला खा
Question 76Single Answer
निम्नलिखित बोलियों में से कौन - सी बोली उत्तर प्रदेश में नहीं बाली जाती?
A
मैथिली
B
अवधी
C
ब्रज
D
खड़ी बोली
Question 77Single Answer
भारत की प्रथम देशज भाषा कौन-सी है?
A
पालि
B
प्राकृत
C
संस्कृत
D
इसमें से कोई नहीं
Question 78Single Answer
भारतेन्दु ने किस पत्रिका का संपादन किया?
A
हिन्दी प्रदीप
B
इन्दु
C
कविवचन सुधा
D
भारतबन्धु
Question 79Single Answer
पूर्वी हिन्दी विकसित हुई है?
A
पैशाची अपभ्रंश
B
अर्धमागधी अपभ्रंश
C
शौरसैनी अपभ्रंश
D
मागधी अपभ्रंश
Question 80Single Answer
मानक हिन्दी का आधार क्या है?
A
खड़ी बोली
B
अपभ्रंश
C
पूर्वी हिन्दी
D
परिनिष्ठ हिन्दी
Test of English Language & Comprehension
Question 81Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
He was in the temper
B
and refused
C
discuss the matter again
D
No error
Question 82Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
A flower makes no garland
B
so we must do a thing together
C
in a unit for a good result
D
No error
Question 83Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
My friend is a software engineer
B
and his wife is doctor
C
so they don’t have enough time for each other
D
No error
Question 84Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I don’t have much time that
B
I hear you in detail with verbosity
C
tell everything in nutshell
D
No error
Question 85Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The atmosphere is changing
B
so I have severe pain in my body
C
if you have any painkiller, please give it to me
D
No error
Question 86Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
No one is without fault
B
because no one is God
C
and only God is fault free
D
No error
Question 87Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Your
B
clock is
C
one hour fast
D
No error
Question 88Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The lose of jobs
B
is regarded by some as an necessary evil
C
in the fight against infliation
D
No error
Question 89Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
In science, the credit goes to a man
B
who convinces the world
C
not to the man to whom the idea first occurs
D
No error
Question 90Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
It is only after
B
the match is over
C
that people realize how exciting it is
D
No error
Question 91Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Off the two
B
sisters, she
C
is better
D
No error
Question 92Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
A interesting book
B
‘A Tale of two cities’
C
was written by Alexander Dumas
D
No error
Question 93Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I shall never
B
forget a good
C
deed you did to me, when I was in crisis
D
No error
Question 94Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Wisdom of Vikramaditya
B
solved many riddles
C
that people brought to him for solution
D
No error
Question 95Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
News you broke to his wife
B
made her nervous
C
and she broke down
D
No error
Question 96Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I have a work
B
to do and
C
so I will reach late
D
No error
Question 97Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I saw portion
B
of the manuscript
C
on birds
D
No error
Question 98Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Talent without experience is waste
B
so one must attain some practical knowledge and
C
it is only practical knowledge through which one can be an expert
D
No error
Question 99Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The Geeta, the Bible and the Quran all show us
B
the true path of humanity
C
Ramayana also can be included in this group
D
No error
Question 100Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Gandhiji was born on 2nd October 1869
B
He devoted two thirds of his life
C
for Indian freedom movement
D
No error
Fitter
Question 101Single Answer
Which tool is used to cut external threads?
A
Die
B
Tap
C
Chisel
D
Reamer
Question 102Single Answer
What is the purpose of a reamer?
A
Cutting threads
B
Finishing holes
C
Cutting grooves
D
Sharpening tools
Question 103Single Answer
A hacksaw is used for:
A
Cutting metal
B
Cutting wood
C
Drilling
D
Filing
Question 104Single Answer
What is the function of a centre punch?
A
Marking the centre of a hole before drilling
B
Cutting threads
C
Scraping metal
D
Smoothing surfaces
Question 105Single Answer
The term "pitch" in threads refers to:
A
The diameter of the thread
B
The distance between adjacent threads
C
The depth of the thread
D
The material of the thread
Question 106Single Answer
Which tool is used for making internal threads?
A
Tap
B
Die
C
File
D
Drill
Question 107Single Answer
A bench vice is used for:
A
Holding workpieces
B
Cutting metal
C
Drilling holes
D
Measuring dimensions
Question 108Single Answer
Which material is commonly used for making cutting tools?
A
Mild steel
B
High-speed steel
C
Copper
D
Aluminium
Question 109Single Answer
Which file is used for rough filing?
A
Smooth file
B
Bastard file
C
Dead smooth file
D
Half-round file
Question 110Single Answer
Which of the following is used for checking the flatness of a surface?
A
Surface plate
B
Try square
C
Caliper
D
Micrometer
Question 111Single Answer
A micrometer measures in:
A
Millimeters
B
Microns
C
Centimeters
D
Inches
Question 112Single Answer
A scriber is used for:
A
Cutting threads
B
Marking lines on metal surfaces
C
Drilling holes
D
Cutting metal
Question 113Single Answer
What does the term "clearance fit" refer to?
A
A fit where parts are press-fitted
B
A fit where there is a small gap between parts
C
A fit where parts are interference-fitted
D
A fit where parts do not come into contact
Question 114Single Answer
Which of the following is a marking tool?
A
Chisel
B
File
C
Scriber
D
Reamer
Question 115Single Answer
A vernier caliper is used for measuring:
A
Lengths
B
Angles
C
Surface roughness
D
Thread pitch
Question 116Single Answer
A tap wrench is used for:
A
Drilling holes
B
Holding taps
C
Cutting threads
D
Filing
Question 117Single Answer
Which type of file is used for finishing curved surfaces?
A
Flat file
B
Round file
C
Half-round file
D
Triangular file
Question 118Single Answer
In a micrometer, the thimble rotates around the:
A
Spindle
B
Anvil
C
Frame
D
Sleeve
Question 119Single Answer
Which part of a micrometer holds the object being measured?
A
Spindle
B
Anvil
C
Sleeve
D
Thimble
Question 120Single Answer
What is the primary purpose of a surface gauge?
A
Checking the depth of a hole
B
Marking out lines parallel to a reference surface
C
Measuring diameters
D
Cutting grooves
Question 121Single Answer
The hardness of a file is measured in terms of:
A
HRC
B
BHN
C
Vickers
D
Mohs scale
Question 122Single Answer
A feeler gauge is used to measure:
A
Thickness of gaps
B
Diameter of holes
C
Angle of a surface
D
Depth of grooves
Question 123Single Answer
In a fitting shop, what is the purpose of a prick punch?
A
Light marking of drill centers
B
Heavy marking for chiseling
C
Rough filing
D
Thread cutting
Question 124Single Answer
What is the advantage of using a Vernier height gauge?
A
Measuring large heights accurately
B
Checking thread depth
C
Measuring thread pitch
D
Measuring the internal diameter of holes
Question 125Single Answer
A hand reamer is used for:
A
Enlarging existing holes
B
Tapping threads
C
Cutting new holes
D
Grinding surfaces
Question 126Single Answer
Which part of the hacksaw holds the blade?
A
Frame
B
Handle
C
Teeth
D
Nose
Question 127Single Answer
A surface plate is primarily used for:
A
Grinding surfaces
B
Holding workpieces
C
Checking flatness
D
Cutting threads
Question 128Single Answer
What is the main purpose of using an engineer’s square?
A
Checking angles
B
Measuring lengths
C
Cutting grooves
D
Marking drill points
Question 129Single Answer
Which type of tap is used for the final finishing of threads?
A
Bottoming tap
B
Taper tap
C
Plug tap
D
Hand tap
Question 130Single Answer
Which tool is used to deburr sharp edges after drilling or cutting?
A
Scraper
B
File
C
Chisel
D
Tap
Question 131Single Answer
What is the main function of a marking gauge?
A
Scribing lines parallel to a reference edge
B
Cutting grooves
C
Measuring diameters
D
Checking flatness
Question 132Single Answer
In threading, what does "TPI" stand for?
A
Threads per inch
B
Total pitch index
C
Thickness per inch
D
Thread point interval
Question 133Single Answer
Which type of file is used for filing keyways and narrow slots?
A
Flat file
B
Needle file
C
Triangular file
D
Square file
Question 134Single Answer
The shank of a reamer is used for:
A
Cutting material
B
Holding the reamer
C
Measuring depth
D
Checking angles
Question 135Single Answer
What is the purpose of a twist drill?
A
Drilling holes in metal
B
Cutting grooves
C
Measuring angles
D
Marking metal surfaces
Question 136Single Answer
The angle between the cutting edge and the face of a tool is called:
A
Clearance angle
B
Rake angle
C
Relief angle
D
Inclination angle
Question 137Single Answer
A file with very fine teeth is called:
A
Dead smooth file
B
Bastard file
C
Second-cut file
D
Round file
Question 138Single Answer
The length of a hacksaw blade is measured between:
A
The teeth
B
The frame
C
The pins that hold the blade
D
The handle
Question 139Single Answer
The hardness of a material is typically measured using:
A
Tensile test
B
Rockwell hardness test
C
Impact test
D
Compression test
Question 140Single Answer
Which type of caliper is used for measuring external diameters?
A
Outside caliper
B
Inside caliper
C
Vernier caliper
D
Divider caliper
Question 141Single Answer
The process of removing small amounts of material to obtain a smooth finish is called:
A
Reaming
B
Filing
C
Lapping
D
Tapping
Question 142Single Answer
Which tool is used for checking the alignment of two holes?
A
Try square
B
Dowel pin
C
Alignment pin
D
Thread gauge
Question 143Single Answer
What is the function of a spring divider?
A
Marking circles or arcs
B
Measuring internal diameters
C
Measuring depth
D
Scribing straight lines
Question 144Single Answer
What is the most important safety gear in a workshop?
A
Gloves
B
Safety glasses
C
Earplugs
D
Hard hat
Question 145Single Answer
What should you do before using a machine in the workshop?
A
Read the manual
B
Check the machine for any visible damage
C
Ensure the work area is clean
D
All of the above
Question 146Single Answer
What is the proper way to lift heavy objects?
A
Bend your back
B
Use your legs to lift
C
Use only your arms
D
Ask someone else to lift it
Question 147Single Answer
What should you do if you see a spill on the workshop floor?
A
Walk around it
B
Report it to a supervisor
C
Clean it up immediately
D
Ignore it
Question 148Single Answer
Which of the following is a common cause of accidents in a workshop?
A
Lack of concentration
B
Following safety rules
C
Using the correct tools
D
Wearing proper PPE
Question 149Single Answer
What should you do if a machine malfunctions?
A
Try to fix it yourself
B
Continue using it carefully
C
Turn it off and report it
D
Ignore the problem
Question 150Single Answer
Why is it important to wear ear protection in noisy environments?
A
To avoid ear infections
B
To prevent hearing damage
C
To block out distractions
D
To look professional
Question 151Single Answer
What is the primary function of dividers in marking off?
A
Measuring and transferring distances
B
Cutting metal
C
Drilling holes
D
Filing surfaces
Question 152Single Answer
What material is commonly used for making dividers?
A
Aluminum
B
Hardened steel
C
Plastic
D
Wood
Question 153Single Answer
How should dividers be maintained to ensure accuracy?
A
Store in a humid environment
B
Apply heavy grease
C
Keep points sharp and clean
D
Leave in direct sunlight
Question 154Single Answer
What is a scribing block used for?
A
Marking lines parallel to a surface
B
Measuring angles
C
Cutting sheet metal
D
Drilling holes
Question 155Single Answer
What is the main component of a scribing block?
A
Blade
B
Scribe needle
C
Hammer
D
Protractor
Question 156Single Answer
What type of dividers are used for precise measurements?
A
Wing dividers
B
Spring dividers
C
Straight dividers
D
Flat dividers
Question 157Single Answer
How should a scribing block be stored?
A
In a damp place
B
Exposed to dust
C
In a protective case
D
Submerged in water
Question 158Single Answer
What is the classification of dividers based on their design?
A
Heavy and light
B
Single and double
C
Long and short
D
Fixed and adjustable
Question 159Single Answer
What care should be taken for dividers to prevent rust?
A
Use sandpaper
B
Store in water
C
Apply oil lightly
D
Heat regularly
Question 160Single Answer
What is the purpose of a surface plate in marking off?
A
Providing a flat reference surface
B
Cutting metal
C
Measuring angles
D
Drilling holes
Question 161Single Answer
What is the primary use of a try square?
A
Checking perpendicularity
B
Measuring lengths
C
Drilling holes
D
Cutting metal
Question 162Single Answer
What material is a try square blade typically made of?
A
Plastic
B
Hardened steel
C
Wood
D
Aluminum
Question 163Single Answer
How should a try square be maintained?
A
Store in a humid environment
B
Bend the blade slightly
C
Apply heavy grease
D
Keep blade clean and free of burrs
Question 164Single Answer
What is the function of an ordinary depth gauge?
A
Measuring angles
B
Cutting metal
C
Measuring depth of holes or recesses
D
Marking lines
Question 165Single Answer
What is the typical accuracy of a protractor?
A
10 degrees
B
0.1 degree
C
5 degrees
D
1 degree
Question 166Single Answer
How should a protractor be stored to prevent damage?
A
In a protective cover
B
In a toolbox with other tools
C
Exposed to moisture
D
In direct sunlight
Question 167Single Answer
What is the main use of a protractor in a workshop?
A
Measuring lengths
B
Drilling holes
C
Measuring angles
D
Filing surfaces
Question 168Single Answer
What is the primary component of an ordinary depth gauge?
A
Depth bar
B
Vernier scale
C
Blade
D
Protractor
Question 169Single Answer
How should a try square be checked for accuracy?
A
Compare with a known 90-degree angle
B
Bend the blade
C
Submerge in water
D
Heat the blade
Question 170Single Answer
What is the purpose of a protractor’s scale?
A
Measuring depth
B
Measuring angles
C
Measuring length
D
Cutting metal
Question 171Single Answer
What is the primary use of a cold chisel?
A
Measuring lengths
B
Drilling holes
C
Cutting or chipping metal
D
Filing surfaces
Question 172Single Answer
What material is commonly used for cold chisels?
A
Aluminum
B
Wood
C
Plastic
D
High carbon steel
Question 173Single Answer
What is the typical cutting angle of a cold chisel?
A
30°
B
45°
C
90°
D
60°
Question 174Single Answer
What type of cold chisel is used for cutting grooves?
A
Cross-cut chisel
B
Flat chisel
C
Round nose chisel
D
Diamond point chisel
Question 175Single Answer
How should cold chisels be maintained to prevent damage?
A
Store in water
B
Use for prying
C
Keep cutting edge sharp and oiled
D
Heat regularly
Question 176Single Answer
What is the purpose of a diamond point chisel?
A
Cutting flat surfaces
B
Cutting V-shaped grooves
C
Cutting round holes
D
Measuring angles
Question 177Single Answer
What care should be taken when using a cold chisel?
A
Strike with a wooden hammer
B
Store in a humid environment
C
Use without a hammer
D
Wear safety goggles
Question 178Single Answer
What type of cold chisel is used for cutting keyways?
A
Flat chisel
B
Cross-cut chisel
C
Diamond point chisel
D
Round nose chisel
Question 179Single Answer
What is the cutting angle for a cold chisel used on soft metals?
A
30°
B
45°
C
60°
D
70°
Question 180Single Answer
How should a damaged cold chisel be handled?
A
Continue using it
B
Store in water
C
Discard immediately
D
Grind to restore cutting edge
Question 181Single Answer
What is the primary function of a power saw?
A
Cutting metal or wood
B
Drilling holes
C
Measuring lengths
D
Filing surfaces
Question 182Single Answer
What type of blade is used in a band saw?
A
Circular blade
B
Reciprocating blade
C
Straight blade
D
Continuous loop blade
Question 183Single Answer
What is the main advantage of a circular saw?
A
High precision for straight cuts
B
Slow cutting speed
C
Used for drilling
D
Low power consumption
Question 184Single Answer
What material is a band saw blade typically made of?
A
High-speed steel
B
Aluminum
C
Plastic
D
Wood
Question 185Single Answer
How should a circular saw blade be maintained?
A
Store in water
B
Use for prying
C
Keep clean and sharp
D
Apply heavy grease
Question 186Single Answer
What is the primary use of a band saw in a workshop?
A
Cutting curves and irregular shapes
B
Drilling holes
C
Measuring angles
D
Filing surfaces
Question 187Single Answer
What safety precaution should be taken when using a power saw?
A
Wear loose clothing
B
Operate without guards
C
Use safety guards and goggles
D
Use a dull blade
Question 188Single Answer
What type of saw is best for cutting thick metal sheets?
A
Hand saw
B
Circular saw
C
Hacksaw
D
Band saw
Question 189Single Answer
How should a band saw be maintained?
A
Leave blade tensioned when not in use
B
Store in a humid environment
C
Clean and adjust blade tension regularly
D
Use for heavy prying
Question 190Single Answer
What is the primary function of a circular saw in metal cutting?
A
Cutting curves
B
Making straight cuts
C
Drilling holes
D
Measuring lengths
Question 191Single Answer
What is the principle of a micrometer?
A
Lever mechanism
B
Screw thread mechanism
C
Gear mechanism
D
Spring mechanism
Question 192Single Answer
What is the least count of a standard micrometer?
A
0.001 mm
B
0.1 mm
C
1 mm
D
0.01 mm
Question 193Single Answer
What is the function of the thimble in a micrometer?
A
Holds the workpiece
B
Locks the spindle
C
Rotates to measure
D
Adjusts the anvil
Question 194Single Answer
How should an outside micrometer be cared for?
A
Store in a humid environment
B
Leave in direct sunlight
C
Apply heavy grease
D
Clean and store in a protective case
Question 195Single Answer
What is the primary use of an inside micrometer?
A
Measuring internal diameters
B
Measuring external dimensions
C
Measuring angles
D
Cutting metal
Question 196Single Answer
What is the least count of a digital micrometer?
A
1 mm
B
0.01 mm
C
0.1 mm
D
0.001 mm
Question 197Single Answer
What is the function of a micrometer depth gauge?
A
Measuring external dimensions
B
Measuring angles
C
Measuring depth of holes
D
Cutting metal
Question 198Single Answer
How is a micrometer reading taken?
A
Add main scale and thimble scale readings
B
Read only the thimble scale
C
Read only the main scale
D
Subtract thimble scale from main scale
Question 199Single Answer
What is the purpose of the ratchet stop in a micrometer?