Kurukshetra a journal on rural development is published by
A
Ministry of Financeย
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 3Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 4Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
ย ย ย ย ย ย 1. a large number of farmers are illiterate and know little about scientific agriculture
ย ย ย ย ย ย ย ย ย ย ย 2. prices of primary products are lower than those of manufactured products
ย ย ย ย ย ย ย ย ย ย ย 3. Investments in agriculture has been low when compared to investment in industry
A
1 and 3
B
2 and 3
C
1 and 2
D
1,2 and 3
Question 5Single Answer
Which of the following programmes aims at the promotion of savings among rural women
A
Rashtriya Mahila Kosh
B
Indira Mahila Yojna
C
Jawahar Rozgar Yojna
D
Mahila Samridhi Yojna
Question 6Single Answer
"Who said, 'India was a parrot unto itself'?
A
Malik Muhammad Joyce
B
Raskhan
C
Rich Khusrow
D
Rich Hasan
Question 7Single Answer
What was the real name of Amir Khusro?
A
Muhammad Hasan
B
Muhammad Hussain
C
Muhammad Khusrow
D
Muhammad Mine
Question 8Single Answer
When was the Constituent Assembly of India formed?
A
1946
B
1947
C
1948
D
1950
Question 9Single Answer
Who was the Chairman of the Drafting Committee of the Indian Constitution?
A
Dr. Rajendra Prasad
B
Dr. B.R. Ambedkar
C
Jawaharlal Nehru
D
Sardar Vallabhbhai Patel
Question 10Single Answer
Who is known as the "Missile Man of India"?
A
Dr. Homi J. Bhabha
B
Dr. Vikram Sarabhai
C
Dr. APJ Abdul Kalam
D
Dr. Satish Dhawan
Question 11Single Answer
The Indian Navy recently received its second indigenous Diving Support Vessel (DSV). What is its name?
A
Nistar
B
Nipun
C
INS Vikrant
D
INS Arihant
Question 12Single Answer
The Public Examinations (Prevention of Unfair Means) Amendment Bill, 2026, was passed by the Rajya Sabha on which date?
A
27 July 2026
B
29 July 2026
C
31 July 2026
D
30 July 2026
Question 13Single Answer
Who won the silver medal in the menโs javelin throw at the Commonwealth Games 2026 held in Glasgow?
A
Yash Vir Singh
B
Neeraj Chopra
C
Kishore Jena
D
Rohit Yadav
Question 14Single Answer
India became which numbered WTO member to accept the Agreement on Fisheries Subsidies (as per recent updates)?
A
120th
B
121st
C
123rd
D
125th
Question 15Single Answer
Which organisation released the Global Tiger Recovery Report 2026?
A
UNEP
B
WWF
C
Global Tiger Forum
D
IUCN
Question 16Single Answer
The RBI continues to promote which system specifically for small-value digital transactions?
A
RTGS
B
NEFT
C
UPI Lite
D
IMPS
Question 17Single Answer
Which ministry implements the PM-KISAN Scheme?
A
Ministry of Finance
B
Ministry of Rural Development
C
Ministry of Agriculture & Farmersโ Welfare
D
Ministry of Food Processing Industries
Question 18Single Answer
Exercise Tarang Shakti is associated with which arm of the Indian Armed Forces?
A
Indian Army
B
Indian Navy
C
Indian Coast Guard
D
Indian Air Force
Question 19Single Answer
In the Commonwealth Games 2026 javelin final, the gold medal was won by an athlete from:
A
Sri Lanka
B
Australia
C
India
D
England
Question 20Single Answer
Which institution publishes the Global Innovation Index?
A
World Bank
B
IMF
C
WIPO
D
WTO
English & Reasoning
Question 21Single Answer
I go to Madurai by โโ Vaigai Express
A
a
B
an
C
some
D
the
Question 22Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 23Single Answer
The payment was collected by the hardworking salesman.
A
The hardworking salesman collected the payment.
B
the salesman who worked heard was able to collect the payment.
C
to collect the payment the salesman had to work hard.
D
The hardworking salesman was able to collect the payment.
Question 24Single Answer
I had to stop all my work to complete this project.
A
All other work had to be stopped to complete this project by me
B
For completing this project all other work must be stopped
C
For completing this project I had to stop all my work
D
To complete this project all other work had been stopped by me
Question 25Single Answer
They have published the names of all the successful candidates.
A
The candidates who have succeeded their names they had published.
B
The names of all the successful candidates have been published by them
C
The candidates who have succeeded their names have been published by them.
D
The names of all the successful candidate were published by them.ย
Question 26Single Answer
The online shopping site lowered the prices.
A
Lowering of the prices was done by the online shopping site
B
The prices were lowered by the online shopping site
C
The prices had been lowered by the online shopping site
D
The prices have been lowered by the online shopping site
Question 27Single Answer
Who taught you to drive a truck ?
A
To drive a truck by whom were you taught?
B
Driving a truck by who were you taught?
C
Driving a truck by who were you being taught?
D
By whom were you taught to drive a truck?
Question 28Single Answer
We shall invite Suresh.
A
Suresh would be invited by us
B
Suresh would have been invited by us
C
Suresh will be invited by us
D
Suresh will have been invited by us
Question 29Single Answer
Dark clouds have overcast the evening sky.
A
By the dark clouds the evening sky was overcast.
B
The evening sky has been overcast by the dark clouds.
C
Dark clouds overcastted the evening sky.
D
The sky of the evening was overcasted by dark clouds.
Question 30Single Answer
The partners will celebrate their triumph tomorrow.ย
A
The triumph would be celebrated by the partners a day before
B
The triumph would be celebrated by the partners a day after
C
The triumph would have been celebrated by the partners a day after
D
The triumph will have been celebrated by the partners tomorrow
Question 31Single Answer
Passage :
Direction :ย Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has โฆโฆโฆโฆโฆa centralized online databank system for all statutory government bodies to โฆโฆโฆโฆan eye on their assets and liabilities.
A
ย presented , stay
B
introduced , keep
C
announce , make
D
created , let
E
proclaimed , hold
Question 32Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
A
liabilities
B
responsibilities
C
estates
D
profits
Question 33Single Answer
Passage :
Direction :ย In the question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Affidavit
A
ย Affirmation
B
Slander
C
Oath
D
Testimony
Question 34Single Answer
Passage :
Direction:ย In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Hollow
A
Alveolate
B
Cleft
C
ย Cavernous
D
Solid
Question 35Single Answer
Passage :
Directions: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Cossetย
A
Ignoreb
B
Close
C
Caress
D
Fondle
Question 36Single Answer
Passage :
Directions: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Ogle
A
Leer
B
Gaze
C
Ignore
D
Gawk
Question 37Single Answer
Passage :
Directions:In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Intrinsic
A
Elemental
B
Innate
C
Connate
D
Acquired
Question 38Single Answer
Passage :
Direction :ย In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Coalesce
A
Separate
B
Adhere
C
Cleave
D
Amalgamate
Question 39Single Answer
Passage :
Directions:ย In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Loiter
A
lagย
B
Hasten
C
Amble
D
Loii
Question 40Single Answer
Passage :
Direction : Question below has two blanks, blank indicating that something has been omitted. Choose the set of words for blank which best fits the meaning of the sentence as a whole.
The protests were......... at ......... awareness among the elite and the educated.
A
held, generating
B
aimed, creating
C
targeted, awakening
D
focused, building
E
concentrated, producing
Question 41Single Answer
How many such pairs of letters are there in the word โCLEANLINESSโ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 42Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 43Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give โXโ as the answer and if more than one such word can be formed, give โYโ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 44Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
Noneย ย ย ย ย ย ย ย ย ย ย ย
B
Oneย ย ย ย ย ย ย ย ย
C
Twoย ย ย ย ย ย ย
D
Threeย ย ย ย ย ย ย ย
E
More than three
Question 45Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 46Single Answer
How many meaningful words can be made from the letters โLMEAโ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 47Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give โYโ as the answer and if no such word can be made, give โXโ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 48Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 49Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 50Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is โAโย and if no such word can be formed your answer is โBโ.
A
V
B
T
C
E
D
A
E
B
Important Questions Package
HAL Operator Exam Online Question Bank Package
Buy HAL Operator Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in HAL Operator question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
HAL Operator (Fitter) Exam - Hindi
Description : 1000 Question with Answer.
โน101[โน500]
2.
HAL Operator (Fitter) Exam - Hindi
Description : 2000 Question with Answer.
โน151[โน500]
3.
HAL Operator (Fitter) Exam - Hindi
Description : 3000 Question with Answer.
โน181[โน500]
4.
HAL Operator (Fitter) Exam - English
Description : 1000 Question with Answer.
โน101[โน500]
5.
HAL Operator (Fitter) Exam - English
Description : 2000 Question with Answer.
โน151[โน500]
6.
HAL Operator (Fitter) Exam - English
Description : 3000 Question with Answer.
โน181[โน500]
7.
HAL Operator (Electronics & Communication Engineering) Exam - Hindi
Description : 1000 Question with Answer.
โน101[โน500]
8.
HAL Operator (Electronics & Communication Engineering) Exam - Hindi
Description : 2000 Question with Answer.
โน151[โน500]
9.
HAL Operator (Electronics & Communication Engineering) Exam - English
Description : 1000 Question with Answer.
โน101[โน500]
10.
HAL Operator (Electronics & Communication Engineering) Exam - English
Description : 2000 Question with Answer.
โน151[โน500]
11.
HAL Operator Exam (Electronics & Communication) - English (Old)
Description : 4000 Question with Answer
โน181[โน500]
12.
HAL Operator (Fitter) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
13.
HAL Operator (Electronics & Communication Engineering) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
14.
HAL Operator (Fitter) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
15.
HAL Operator (Electronics & Communication Engineering) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
16.
HAL Operator (Fitter) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
โน450[โน800]
17.
HAL Operator (Electronics & Communication Engineering) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
โน450[โน800]
18.
HAL Operator (Fitter) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
โน390[โน600]
19.
HAL Operator (Electronics & Communication Engineering) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
โน390[โน600]
English & Reasoning
Question 51Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
A
X
B
W
C
I
D
H
Question 52Single Answer
Passage :
Directionย : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
A
SUM
B
BIG
C
Both BIG and THE
D
FOR
E
Both FOR and BIG
Question 53Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be second from the right ?
A
AND
B
FOR
C
THE
D
BIG
E
SUM
Question 54Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If second alphabet in each of the words is changed to next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed ?
A
None
B
One
C
Two
D
Three
E
Four
Question 55Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
How many letters are there in the English alphabetical series between the second letter of the word which is second from the right and the second letter of the word which is second from the left of the given words?
A
Two
B
Five
C
Six
D
Nine
E
Three
Question 56Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If in each of the given words, each of the consonant is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will no vowels appear?
A
None
B
One
C
Two
D
Three
E
More than three
Question 57Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the third alphabet in each of the words is changed to the next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed?
A
None
B
One
C
Two
D
Three
E
Four
Question 58Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the position of the first and the second alphabets of each of the words are interchanged, which of the following will form a meaningful English word?
A
Both CAT and OWN
B
Both BRU and INK
C
Only CAT
D
Only INK
E
Only LEG
Question 59Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be exactly in the middle of the five words?
A
OWN
B
LEG
C
BRU
D
CAT
E
INK
Question 60Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If in each of the given words, each of the consonants is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will the same alphabet appear twice?
A
None
B
One
C
Two
D
Three
E
More than three
Fitter
Question 61Single Answer
Which tool is used to cut external threads?
A
Die
B
Tap
C
Chisel
D
Reamer
Question 62Single Answer
What is the purpose of a reamer?
A
Cutting threads
B
Finishing holes
C
Cutting grooves
D
Sharpening tools
Question 63Single Answer
A hacksaw is used for:
A
Cutting metal
B
Cutting wood
C
Drilling
D
Filing
Question 64Single Answer
What is the function of a centre punch?
A
Marking the centre of a hole before drilling
B
Cutting threads
C
Scraping metal
D
Smoothing surfaces
Question 65Single Answer
The term "pitch" in threads refers to:
A
The diameter of the thread
B
The distance between adjacent threads
C
The depth of the thread
D
The material of the thread
Question 66Single Answer
Which tool is used for making internal threads?
A
Tap
B
Die
C
File
D
Drill
Question 67Single Answer
A bench vice is used for:
A
Holding workpieces
B
Cutting metal
C
Drilling holes
D
Measuring dimensions
Question 68Single Answer
Which material is commonly used for making cutting tools?
A
Mild steel
B
High-speed steel
C
Copper
D
Aluminium
Question 69Single Answer
Which file is used for rough filing?
A
Smooth file
B
Bastard file
C
Dead smooth file
D
Half-round file
Question 70Single Answer
Which of the following is used for checking the flatness of a surface?
A
Surface plate
B
Try square
C
Caliper
D
Micrometer
Question 71Single Answer
A micrometer measures in:
A
Millimeters
B
Microns
C
Centimeters
D
Inches
Question 72Single Answer
A scriber is used for:
A
Cutting threads
B
Marking lines on metal surfaces
C
Drilling holes
D
Cutting metal
Question 73Single Answer
What does the term "clearance fit" refer to?
A
A fit where parts are press-fitted
B
A fit where there is a small gap between parts
C
A fit where parts are interference-fitted
D
A fit where parts do not come into contact
Question 74Single Answer
Which of the following is a marking tool?
A
Chisel
B
File
C
Scriber
D
Reamer
Question 75Single Answer
A vernier caliper is used for measuring:
A
Lengths
B
Angles
C
Surface roughness
D
Thread pitch
Question 76Single Answer
A tap wrench is used for:
A
Drilling holes
B
Holding taps
C
Cutting threads
D
Filing
Question 77Single Answer
Which type of file is used for finishing curved surfaces?
A
Flat file
B
Round file
C
Half-round file
D
Triangular file
Question 78Single Answer
In a micrometer, the thimble rotates around the:
A
Spindle
B
Anvil
C
Frame
D
Sleeve
Question 79Single Answer
Which part of a micrometer holds the object being measured?
A
Spindle
B
Anvil
C
Sleeve
D
Thimble
Question 80Single Answer
What is the primary purpose of a surface gauge?
A
Checking the depth of a hole
B
Marking out lines parallel to a reference surface
C
Measuring diameters
D
Cutting grooves
Question 81Single Answer
The hardness of a file is measured in terms of:
A
HRC
B
BHN
C
Vickers
D
Mohs scale
Question 82Single Answer
A feeler gauge is used to measure:
A
Thickness of gaps
B
Diameter of holes
C
Angle of a surface
D
Depth of grooves
Question 83Single Answer
In a fitting shop, what is the purpose of a prick punch?
A
Light marking of drill centers
B
Heavy marking for chiseling
C
Rough filing
D
Thread cutting
Question 84Single Answer
What is the advantage of using a Vernier height gauge?
A
Measuring large heights accurately
B
Checking thread depth
C
Measuring thread pitch
D
Measuring the internal diameter of holes
Question 85Single Answer
A hand reamer is used for:
A
Enlarging existing holes
B
Tapping threads
C
Cutting new holes
D
Grinding surfaces
Question 86Single Answer
Which part of the hacksaw holds the blade?
A
Frame
B
Handle
C
Teeth
D
Nose
Question 87Single Answer
A surface plate is primarily used for:
A
Grinding surfaces
B
Holding workpieces
C
Checking flatness
D
Cutting threads
Question 88Single Answer
What is the main purpose of using an engineerโs square?
A
Checking angles
B
Measuring lengths
C
Cutting grooves
D
Marking drill points
Question 89Single Answer
Which type of tap is used for the final finishing of threads?
A
Bottoming tap
B
Taper tap
C
Plug tap
D
Hand tap
Question 90Single Answer
Which tool is used to deburr sharp edges after drilling or cutting?
A
Scraper
B
File
C
Chisel
D
Tap
Question 91Single Answer
What is the main function of a marking gauge?
A
Scribing lines parallel to a reference edge
B
Cutting grooves
C
Measuring diameters
D
Checking flatness
Question 92Single Answer
In threading, what does "TPI" stand for?
A
Threads per inch
B
Total pitch index
C
Thickness per inch
D
Thread point interval
Question 93Single Answer
Which type of file is used for filing keyways and narrow slots?
A
Flat file
B
Needle file
C
Triangular file
D
Square file
Question 94Single Answer
The shank of a reamer is used for:
A
Cutting material
B
Holding the reamer
C
Measuring depth
D
Checking angles
Question 95Single Answer
What is the purpose of a twist drill?
A
Drilling holes in metal
B
Cutting grooves
C
Measuring angles
D
Marking metal surfaces
Question 96Single Answer
The angle between the cutting edge and the face of a tool is called:
A
Clearance angle
B
Rake angle
C
Relief angle
D
Inclination angle
Question 97Single Answer
A file with very fine teeth is called:
A
Dead smooth file
B
Bastard file
C
Second-cut file
D
Round file
Question 98Single Answer
The length of a hacksaw blade is measured between:
A
The teeth
B
The frame
C
The pins that hold the blade
D
The handle
Question 99Single Answer
The hardness of a material is typically measured using:
A
Tensile test
B
Rockwell hardness test
C
Impact test
D
Compression test
Question 100Single Answer
Which type of caliper is used for measuring external diameters?
A
Outside caliper
B
Inside caliper
C
Vernier caliper
D
Divider caliper
Question 101Single Answer
The process of removing small amounts of material to obtain a smooth finish is called:
A
Reaming
B
Filing
C
Lapping
D
Tapping
Question 102Single Answer
Which tool is used for checking the alignment of two holes?
A
Try square
B
Dowel pin
C
Alignment pin
D
Thread gauge
Question 103Single Answer
What is the function of a spring divider?
A
Marking circles or arcs
B
Measuring internal diameters
C
Measuring depth
D
Scribing straight lines
Question 104Single Answer
What is the most important safety gear in a workshop?
A
Gloves
B
Safety glasses
C
Earplugs
D
Hard hat
Question 105Single Answer
What should you do before using a machine in the workshop?
A
Read the manual
B
Check the machine for any visible damage
C
Ensure the work area is clean
D
All of the above
Question 106Single Answer
What is the proper way to lift heavy objects?
A
Bend your back
B
Use your legs to lift
C
Use only your arms
D
Ask someone else to lift it
Question 107Single Answer
What should you do if you see a spill on the workshop floor?
A
Walk around it
B
Report it to a supervisor
C
Clean it up immediately
D
Ignore it
Question 108Single Answer
Which of the following is a common cause of accidents in a workshop?
A
Lack of concentration
B
Following safety rules
C
Using the correct tools
D
Wearing proper PPE
Question 109Single Answer
What should you do if a machine malfunctions?
A
Try to fix it yourself
B
Continue using it carefully
C
Turn it off and report it
D
Ignore the problem
Question 110Single Answer
Why is it important to wear ear protection in noisy environments?
A
To avoid ear infections
B
To prevent hearing damage
C
To block out distractions
D
To look professional
Question 111Single Answer
What is the primary function of dividers in marking off?
A
Measuring and transferring distances
B
Cutting metal
C
Drilling holes
D
Filing surfaces
Question 112Single Answer
What material is commonly used for making dividers?
A
Aluminum
B
Hardened steel
C
Plastic
D
Wood
Question 113Single Answer
How should dividers be maintained to ensure accuracy?
A
Store in a humid environment
B
Apply heavy grease
C
Keep points sharp and clean
D
Leave in direct sunlight
Question 114Single Answer
What is a scribing block used for?
A
Marking lines parallel to a surface
B
Measuring angles
C
Cutting sheet metal
D
Drilling holes
Question 115Single Answer
What is the main component of a scribing block?
A
Blade
B
Scribe needle
C
Hammer
D
Protractor
Question 116Single Answer
What type of dividers are used for precise measurements?
A
Wing dividers
B
Spring dividers
C
Straight dividers
D
Flat dividers
Question 117Single Answer
How should a scribing block be stored?
A
In a damp place
B
Exposed to dust
C
In a protective case
D
Submerged in water
Question 118Single Answer
What is the classification of dividers based on their design?
A
Heavy and light
B
Single and double
C
Long and short
D
Fixed and adjustable
Question 119Single Answer
What care should be taken for dividers to prevent rust?
A
Use sandpaper
B
Store in water
C
Apply oil lightly
D
Heat regularly
Question 120Single Answer
What is the purpose of a surface plate in marking off?
A
Providing a flat reference surface
B
Cutting metal
C
Measuring angles
D
Drilling holes
Question 121Single Answer
What is the SI unit of length?
A
Kilometer
B
Centimeter
C
Meter
D
Millimeter
Question 122Single Answer
What is 3/4 of 16?
A
12
B
10
C
8
D
14
Question 123Single Answer
Which fraction is equivalent to 2/5?
A
3/6
B
4/10
C
5/8
D
6/12
Question 124Single Answer
What is the result of 5/6 + 2/3?
A
3/2
B
7/6
C
1/2
D
5/3
Question 125Single Answer
How many millimeters are in 1 meter?
A
100
B
10000
C
10
D
1000
Question 126Single Answer
What is the decimal equivalent of 3/8?
A
0.425
B
0.325
C
0.375
D
0.475
Question 127Single Answer
What is 1/2 divided by 1/4?
A
1
B
4
C
3
D
2
Question 128Single Answer
What is the SI unit of mass?
A
Kilogram
B
Gram
C
Tonne
D
Milligram
Question 129Single Answer
What is 7/8 minus 3/8?
A
1/2
B
1/4
C
3/4
D
1/8
Question 130Single Answer
How many centimeters are in 1 meter?
A
100
B
10
C
1000
D
10000
Question 131Single Answer
What is the square root of 16?
A
2
B
6
C
4
D
8
Question 132Single Answer
If the ratio of two numbers is 3:5 and their sum is 40, what is the smaller number?
A
12
B
18
C
15
D
20
Question 133Single Answer
What is 25% of 200?
A
25
B
100
C
75
D
50
Question 134Single Answer
What is the square root of 49?
A
5
B
6
C
7
D
8
Question 135Single Answer
If a:b = 2:3 and b:c = 4:5, what is a:c?
A
3:8
B
6:10
C
5:12
D
8:15
Question 136Single Answer
What is 40% of 150?
A
50
B
60
C
70
D
80
Question 137Single Answer
What is the square root of 100?
A
10
B
9
C
8
D
11
Question 138Single Answer
If two quantities are in the ratio 5:7 and their difference is 12, what is the larger number?
A
21
B
24
C
27
D
30
Question 139Single Answer
What is 15% of 300?
A
30
B
60
C
45
D
75
Question 140Single Answer
If a number is increased by 20% and becomes 120, what is the original number?
A
100
B
90
C
80
D
110
Question 141Single Answer
What is the primary purpose of personal protective equipment (PPE) in an industrial setting?
A
To enhance worker comfort
B
To protect against workplace hazards
C
To comply with fashion standards
D
To increase productivity
Question 142Single Answer
Which of the following is not a type of PPE?
A
Safety helmet
B
Safety goggles
C
Regular shoes
D
Gloves
Question 143Single Answer
What does the acronym PPE stand for?
A
Personal Protection Essentials
B
Protective Personal Equipment
C
Professional Protection Ensemble
D
Personal Protective Equipment
Question 144Single Answer
In first aid, what is the first step when approaching an injured person?
A
Call for help
B
Assess the situation for danger
C
Apply bandages
D
Give CPR
Question 145Single Answer
What is the correct sequence for CPR?
A
Circulation, Airway, Breathing
B
Breathing, Circulation, Airway
C
Airway, Breathing, Circulation
D
Circulation, Breathing, Airway
Question 146Single Answer
Which fire extinguisher is suitable for electrical fires?
A
CO2
B
Foam
C
Water
D
Wet chemical
Question 147Single Answer
What color is typically used for mandatory safety signs?
A
Red
B
Yellow
C
Green
D
Blue
Question 148Single Answer
What is the main goal of housekeeping in a workshop?
A
To make the place look attractive
B
To prevent accidents and maintain efficiency
C
To store tools randomly
D
To ignore waste materials
Question 149Single Answer
Which method is best for disposing of hazardous waste?
A
Dumping in rivers
B
Incineration without control
C
Mixing with regular waste
D
Authorized hazardous waste facilities
Question 150Single Answer
What is the hierarchy of controls in occupational safety starting from most effective?
A
Elimination, Substitution, Engineering, Administrative, PPE