The payment was collected by the hardworking salesman.
A
The hardworking salesman collected the payment.
B
the salesman who worked heard was able to collect the payment.
C
to collect the payment the salesman had to work hard.
D
The hardworking salesman was able to collect the payment.
Question 4Single Answer
I had to stop all my work to complete this project.
A
All other work had to be stopped to complete this project by me
B
For completing this project all other work must be stopped
C
For completing this project I had to stop all my work
D
To complete this project all other work had been stopped by me
Question 5Single Answer
They have published the names of all the successful candidates.
A
The candidates who have succeeded their names they had published.
B
The names of all the successful candidates have been published by them
C
The candidates who have succeeded their names have been published by them.
D
The names of all the successful candidate were published by them.ย
Question 6Single Answer
The online shopping site lowered the prices.
A
Lowering of the prices was done by the online shopping site
B
The prices were lowered by the online shopping site
C
The prices had been lowered by the online shopping site
D
The prices have been lowered by the online shopping site
Question 7Single Answer
Who taught you to drive a truck ?
A
To drive a truck by whom were you taught?
B
Driving a truck by who were you taught?
C
Driving a truck by who were you being taught?
D
By whom were you taught to drive a truck?
Question 8Single Answer
We shall invite Suresh.
A
Suresh would be invited by us
B
Suresh would have been invited by us
C
Suresh will be invited by us
D
Suresh will have been invited by us
Question 9Single Answer
Dark clouds have overcast the evening sky.
A
By the dark clouds the evening sky was overcast.
B
The evening sky has been overcast by the dark clouds.
C
Dark clouds overcastted the evening sky.
D
The sky of the evening was overcasted by dark clouds.
Question 10Single Answer
The partners will celebrate their triumph tomorrow.ย
A
The triumph would be celebrated by the partners a day before
B
The triumph would be celebrated by the partners a day after
C
The triumph would have been celebrated by the partners a day after
D
The triumph will have been celebrated by the partners tomorrow
General Knowledge
Question 11Single Answer
Yojna a weekly journal
A
Ministry of Financeย ย ย ย ย
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 12Single Answer
Kurukshetra a journal on rural development is published by
A
Ministry of Financeย
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 13Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 14Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
ย ย ย ย ย ย 1. a large number of farmers are illiterate and know little about scientific agriculture
ย ย ย ย ย ย ย ย ย ย ย 2. prices of primary products are lower than those of manufactured products
ย ย ย ย ย ย ย ย ย ย ย 3. Investments in agriculture has been low when compared to investment in industry
A
1 and 3
B
2 and 3
C
1 and 2
D
1,2 and 3
Question 15Single Answer
Which of the following programmes aims at the promotion of savings among rural women
A
Rashtriya Mahila Kosh
B
Indira Mahila Yojna
C
Jawahar Rozgar Yojna
D
Mahila Samridhi Yojna
Question 16Single Answer
Sattriya dance form is famous in which of these states ?
A
Assam
B
Himachal Pradesh
C
Punjab
D
Tamil Nadu
Question 17Single Answer
"Who said, 'India was a parrot unto itself'?
A
Malik Muhammad Joyce
B
Raskhan
C
Rich Khusrow
D
Rich Hasan
Question 18Single Answer
Which is the national game of Bhutan ?
A
badminton
B
basketball
C
football
D
archery
Question 19Single Answer
When was the Constituent Assembly of India formed?
A
1946
B
1947
C
1948
D
1950
Question 20Single Answer
What major defence-related development was highlighted on 1 May 2026 involving India and Italy?
A
Joint naval exercise in the Indian Ocean
B
Purchase of Rafale jets
C
Rajnath Singh-Italy Defence Pact
D
Signing of a nuclear agreement
Question 21Single Answer
Which satellite was launched by ISRO around early May 2026?
A
GSAT-31
B
Chandrayaan-4
C
INSAT-4CR
D
GSAT-32
Question 22Single Answer
What is Prerna 2.0, launched/introduced in the news on 1 May 2026?
A
A new defence missile system
B
Green hydrogen mission
C
AI Tutoring initiative
D
Digital payment platform
Question 23Single Answer
UAE announced its exit from OPEC, with the decision taking effect from:
A
1 May 2026
B
1 January 2026
C
1 July 2026
D
31 December 2026
Question 24Single Answer
A tragic road accident in Dhar, Madhya Pradesh on or around 1 May 2026 resulted in how many deaths?
A
At least 16 (including 6 children and 7 women)
B
8
C
25
D
12
Question 25Single Answer
A wall collapse at a hospital in which city killed seven people around early May 2026?
A
Bengaluru, Karnataka
B
Mumbai
C
Hyderabad
D
Chennai
Question 26Single Answer
Indian airlines (Air India, IndiGo, SpiceJet) informed the government about potential operational issues due to:
A
Pilot shortage
B
High fuel prices and Strait of Hormuz closure amid Iran war
C
New DGCA regulations
D
Airport congestion
Question 27Single Answer
RBI's April 2026 Monetary Policy kept the repo rate unchanged at:
A
6.5%
B
6.0%
C
4.75%
D
5.25%
Question 28Single Answer
Which initiative or mission was linked to Tatya Topeโs letter discovery?
A
Swachh Bharat
B
Namami Gange
C
Digital India
D
Gyan Bharatam Mission
Question 29Single Answer
Neeraj Chopra began his pre-season training for 2026 in which country?
A
Germany
B
South Africa (Potchefstroom)
C
USA
D
Australia
Question 30Single Answer
Who is known as the "Missile Man of India"?
A
Dr. Homi J. Bhabha
B
Dr. Vikram Sarabhai
C
Dr. APJ Abdul Kalam
D
Dr. Satish Dhawan
Mathematics
Question 31Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 32Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 33Single Answer
356 x 936 โ 356 x 836 = ?
A
35600ย ย
B
34500
C
9630
D
93600
Question 34Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 35Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
ย
Question 36Single Answer
If 34X-2 = 729, then find the value of X.
A
4ย ย ย ย ย
B
3
C
2ย
D
5
Question 37Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 38Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169ย ย
B
36
C
196ย
D
Can not say
Question 39Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16 ย ย
B
25
C
28 ย
D
30
Question 40Single Answer
If x*y = x2 + y2 โ xy, then value of 9*11 is
A
93ย ย ย ย ย
B
103
C
60.5
D
121
Question 41Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 42Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3ย
B
4
C
5ย ย ย ย
D
7
Question 43Single Answer
Write the 44000 in Roman numerals
A
XLIย
B
XLVI
C
XLIVย
D
XLVIC
Question 44Single Answer
Convert 0.0909โฆ into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 45Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Reasoning
Question 46Single Answer
Passage :
Direction:ย Study the given information carefully and answer the given question
P, Q, R, S, T, V, X and Y are seated in a straight line facing North. P sits fourth to the left of V. V sits either sixth from the left end of the line or fourth from the right end of the line. S sits second to the right of R. R is not an immediate neighbor of V. T and Q are immediate neighbours of each other but neither T not Q sits at extreme ends of the line. Only one person sits between T and X. X does not sit at the extreme end of the line
According to the passage, what is the main purpose of data protection laws ?
A
To ensure that foreign countries invest in research for drugs to treat diseases like TB
B
To attract Indian scientists back to the country
C
To prevent misuse of research to make profit by competing companies
D
To make clinical trials more acceptable to the public
E
None of these
Question 47Single Answer
โGramโ is relatd to โMassโ in the same way as โCentimetreโ is related to
A
Area
B
Volume
C
Length
D
Sound
E
Energy
Question 48Single Answer
'Mustard' is related to 'Seed' in the same way as 'Carrot' is related to
A
Fruit
B
Stem
C
Flower
D
Root
E
None of these
Question 49Single Answer
Which of the following pairs of words have the same relationship as Fan : Heat?
A
Water ย ย ย ย ย ย : ย ย ย ย ย ย ย ย ย Drink
B
Lightย ย ย ย ย ย ย ย :ย ย ย ย Night
C
Teach ย ย ย ย ย :ย ย ย Student
D
Air ย ย ย ย ย ย ย ย ย ย ย :ย ย ย ย Breathe
E
Food ย ย ย ย ย ย ย :ย ย ย ย Hunger
Question 50Single Answer
'Radish' is related to 'Root', in the same way as 'Brinjal' is related to
A
Fruit
B
Stem
C
Flower
D
Root
E
None of these
Important Questions Package
Indian Ordnance Factory Apprentice Exam Online Question Bank Package
Buy Indian Ordnance Factory Apprentice Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in Indian Ordnance Factory Apprentice question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - Hindi
Description : 1000 Question with Answer.
โน101[โน500]
2.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - Hindi
Description : 2000 Question with Answer.
โน151[โน500]
3.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - English
Description : 1000 Question with Answer.
โน101[โน500]
4.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - English
Description : 1900 Question with Answer.
โน151[โน500]
5.
Indian Ordnance Factory Apprentice Non ITI Exam - Hindi
Description : 1000 Question with Answer.
โน101[โน500]
6.
Indian Ordnance Factory Apprentice Non ITI Exam - Hindi
Description : 2000 Question with Answer.
โน151[โน500]
7.
Indian Ordnance Factory Apprentice Non ITI Exam - English
Description : 1000 Question with Answer.
โน101[โน500]
8.
Indian Ordnance Factory Apprentice Non ITI Exam - English
Description : 2000 Question with Answer.
โน151[โน500]
9.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
10.
Indian Ordnance Factory Apprentice Non ITI Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
11.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
12.
Indian Ordnance Factory Apprentice Non ITI Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
โน151[โน450]
13.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
โน450[โน800]
14.
Indian Ordnance Factory Apprentice Non ITI Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
โน450[โน800]
15.
Indian Ordnance Factory Apprentice ITI (Fitter) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
โน390[โน600]
16.
Indian Ordnance Factory Apprentice Non ITI Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
โน390[โน600]
Reasoning
Question 51Single Answer
'Jackal' is related to 'Carnivorous', in the same way as 'Goat' is related to
A
Omnivorous
B
Carnivorous
C
Herbivorous
D
Multivorous
E
None of these
Question 52Single Answer
Which of the following pairs has similar relationship as Run : Race?
A
Party : Dance
B
Study : Book
C
Lecture : Study
D
Enjoy : Journey
E
None of these
Question 53Single Answer
Which of the following has same relationship as that of Money : Wealth?
A
Pity : Kindness
B
Cruel : Anger
C
Wise : Education
D
Pride : Humility
E
None of these
Question 54Single Answer
Which of the following is related to โMelodyโ, in the same way as โDeliciousโ is related to 'Taste'?
A
Memory
B
Highness
C
Tongue
D
Speak
E
Voice
Question 55Single Answer
Offhandโ is related to โPremeditationโ in the same way as โAbove boardโ is related to
A
Integrity
B
Honesty
C
Guide
D
Competition
E
None of these
Question 56Single Answer
5 : 7 : : ? : 28
A
20
B
14
C
56
D
26
E
None of these
Question 57Single Answer
Which one is different form the remaining three?
A
GIJK
B
DFGH
C
CEFG
D
ABCD
E
None of these
Question 58Single Answer
Three of the following four are alike in certain way and so form a group. Which is one that does not belong to the group?
A
71
B
73
C
77
D
67
E
None of these
Question 59Single Answer
Unscramble the letters in the given words and find the odd one out.
A
UMRSME
B
EIWNTR
C
PIGRSN
D
LCUOD
E
None of these
Question 60Single Answer
What should come next in the following number series?
0 2 4 6 2 3 0 2 4 6 4 5 0 2 4 6 6 7 0 2?
A
4
B
2
C
6
D
8
E
5
Fitter
Question 61Single Answer
Which tool is used to cut external threads?
A
Die
B
Tap
C
Chisel
D
Reamer
Question 62Single Answer
What is the purpose of a reamer?
A
Cutting threads
B
Finishing holes
C
Cutting grooves
D
Sharpening tools
Question 63Single Answer
A hacksaw is used for:
A
Cutting metal
B
Cutting wood
C
Drilling
D
Filing
Question 64Single Answer
What is the function of a centre punch?
A
Marking the centre of a hole before drilling
B
Cutting threads
C
Scraping metal
D
Smoothing surfaces
Question 65Single Answer
The term "pitch" in threads refers to:
A
The diameter of the thread
B
The distance between adjacent threads
C
The depth of the thread
D
The material of the thread
Question 66Single Answer
Which tool is used for making internal threads?
A
Tap
B
Die
C
File
D
Drill
Question 67Single Answer
A bench vice is used for:
A
Holding workpieces
B
Cutting metal
C
Drilling holes
D
Measuring dimensions
Question 68Single Answer
Which material is commonly used for making cutting tools?
A
Mild steel
B
High-speed steel
C
Copper
D
Aluminium
Question 69Single Answer
Which file is used for rough filing?
A
Smooth file
B
Bastard file
C
Dead smooth file
D
Half-round file
Question 70Single Answer
Which of the following is used for checking the flatness of a surface?
A
Surface plate
B
Try square
C
Caliper
D
Micrometer
Question 71Single Answer
A micrometer measures in:
A
Millimeters
B
Microns
C
Centimeters
D
Inches
Question 72Single Answer
A scriber is used for:
A
Cutting threads
B
Marking lines on metal surfaces
C
Drilling holes
D
Cutting metal
Question 73Single Answer
What does the term "clearance fit" refer to?
A
A fit where parts are press-fitted
B
A fit where there is a small gap between parts
C
A fit where parts are interference-fitted
D
A fit where parts do not come into contact
Question 74Single Answer
Which of the following is a marking tool?
A
Chisel
B
File
C
Scriber
D
Reamer
Question 75Single Answer
A vernier caliper is used for measuring:
A
Lengths
B
Angles
C
Surface roughness
D
Thread pitch
Question 76Single Answer
A tap wrench is used for:
A
Drilling holes
B
Holding taps
C
Cutting threads
D
Filing
Question 77Single Answer
Which type of file is used for finishing curved surfaces?
A
Flat file
B
Round file
C
Half-round file
D
Triangular file
Question 78Single Answer
In a micrometer, the thimble rotates around the:
A
Spindle
B
Anvil
C
Frame
D
Sleeve
Question 79Single Answer
Which part of a micrometer holds the object being measured?
A
Spindle
B
Anvil
C
Sleeve
D
Thimble
Question 80Single Answer
What is the primary purpose of a surface gauge?
A
Checking the depth of a hole
B
Marking out lines parallel to a reference surface
C
Measuring diameters
D
Cutting grooves
Question 81Single Answer
The hardness of a file is measured in terms of:
A
HRC
B
BHN
C
Vickers
D
Mohs scale
Question 82Single Answer
A feeler gauge is used to measure:
A
Thickness of gaps
B
Diameter of holes
C
Angle of a surface
D
Depth of grooves
Question 83Single Answer
In a fitting shop, what is the purpose of a prick punch?
A
Light marking of drill centers
B
Heavy marking for chiseling
C
Rough filing
D
Thread cutting
Question 84Single Answer
What is the advantage of using a Vernier height gauge?
A
Measuring large heights accurately
B
Checking thread depth
C
Measuring thread pitch
D
Measuring the internal diameter of holes
Question 85Single Answer
A hand reamer is used for:
A
Enlarging existing holes
B
Tapping threads
C
Cutting new holes
D
Grinding surfaces
Question 86Single Answer
Which part of the hacksaw holds the blade?
A
Frame
B
Handle
C
Teeth
D
Nose
Question 87Single Answer
A surface plate is primarily used for:
A
Grinding surfaces
B
Holding workpieces
C
Checking flatness
D
Cutting threads
Question 88Single Answer
What is the main purpose of using an engineerโs square?
A
Checking angles
B
Measuring lengths
C
Cutting grooves
D
Marking drill points
Question 89Single Answer
Which type of tap is used for the final finishing of threads?
A
Bottoming tap
B
Taper tap
C
Plug tap
D
Hand tap
Question 90Single Answer
Which tool is used to deburr sharp edges after drilling or cutting?
A
Scraper
B
File
C
Chisel
D
Tap
Question 91Single Answer
What is the main function of a marking gauge?
A
Scribing lines parallel to a reference edge
B
Cutting grooves
C
Measuring diameters
D
Checking flatness
Question 92Single Answer
In threading, what does "TPI" stand for?
A
Threads per inch
B
Total pitch index
C
Thickness per inch
D
Thread point interval
Question 93Single Answer
Which type of file is used for filing keyways and narrow slots?
A
Flat file
B
Needle file
C
Triangular file
D
Square file
Question 94Single Answer
The shank of a reamer is used for:
A
Cutting material
B
Holding the reamer
C
Measuring depth
D
Checking angles
Question 95Single Answer
What is the purpose of a twist drill?
A
Drilling holes in metal
B
Cutting grooves
C
Measuring angles
D
Marking metal surfaces
Question 96Single Answer
The angle between the cutting edge and the face of a tool is called:
A
Clearance angle
B
Rake angle
C
Relief angle
D
Inclination angle
Question 97Single Answer
A file with very fine teeth is called:
A
Dead smooth file
B
Bastard file
C
Second-cut file
D
Round file
Question 98Single Answer
The length of a hacksaw blade is measured between:
A
The teeth
B
The frame
C
The pins that hold the blade
D
The handle
Question 99Single Answer
The hardness of a material is typically measured using:
A
Tensile test
B
Rockwell hardness test
C
Impact test
D
Compression test
Question 100Single Answer
Which type of caliper is used for measuring external diameters?
A
Outside caliper
B
Inside caliper
C
Vernier caliper
D
Divider caliper
Question 101Single Answer
The process of removing small amounts of material to obtain a smooth finish is called:
A
Reaming
B
Filing
C
Lapping
D
Tapping
Question 102Single Answer
Which tool is used for checking the alignment of two holes?
A
Try square
B
Dowel pin
C
Alignment pin
D
Thread gauge
Question 103Single Answer
What is the function of a spring divider?
A
Marking circles or arcs
B
Measuring internal diameters
C
Measuring depth
D
Scribing straight lines
Question 104Single Answer
What is the most important safety gear in a workshop?
A
Gloves
B
Safety glasses
C
Earplugs
D
Hard hat
Question 105Single Answer
What should you do before using a machine in the workshop?
A
Read the manual
B
Check the machine for any visible damage
C
Ensure the work area is clean
D
All of the above
Question 106Single Answer
What is the proper way to lift heavy objects?
A
Bend your back
B
Use your legs to lift
C
Use only your arms
D
Ask someone else to lift it
Question 107Single Answer
What should you do if you see a spill on the workshop floor?
A
Walk around it
B
Report it to a supervisor
C
Clean it up immediately
D
Ignore it
Question 108Single Answer
Which of the following is a common cause of accidents in a workshop?
A
Lack of concentration
B
Following safety rules
C
Using the correct tools
D
Wearing proper PPE
Question 109Single Answer
What should you do if a machine malfunctions?
A
Try to fix it yourself
B
Continue using it carefully
C
Turn it off and report it
D
Ignore the problem
Question 110Single Answer
Why is it important to wear ear protection in noisy environments?
A
To avoid ear infections
B
To prevent hearing damage
C
To block out distractions
D
To look professional
Question 111Single Answer
What does the color red usually indicate in workshop safety?
A
Danger or stop
B
Go
C
Maintenance
D
Safety equipment
Question 112Single Answer
What type of fire extinguisher should be used for electrical fires?
A
Water
B
Foam
C
CO2
D
Powder
Question 113Single Answer
Why should loose clothing be avoided in a workshop?
A
It can cause heat exhaustion
B
It can get caught in machinery
C
It looks unprofessional
D
It restricts movement
Question 114Single Answer
When using a ladder, what is the best practice?
A
Place it on uneven ground
B
Use the top step
C
Ensure itโs stable before climbing
D
Climb with tools in hand
Question 115Single Answer
What is the purpose of a Material Safety Data Sheet (MSDS)?
A
To list the price of materials
B
To provide safety information about chemicals
C
To indicate how to store materials
D
To record material usage
Question 116Single Answer
What is Lockout-Tagout (LOTO)?
A
A process for securing tools
B
A system to prevent unauthorized use of machines
C
A way to clean up spills
D
A method to lock doors
Question 117Single Answer
Which of the following is a correct step in using a fire extinguisher?
A
Stand 5 feet away
B
Aim at the base of the fire
C
Use short bursts of spray
D
Point it at the flames
Question 118Single Answer
When is it acceptable to remove your safety glasses in the workshop?
A
When youโre feeling hot
B
When no one is looking
C
Only when you leave the workshop area
D
While operating a machine
Question 119Single Answer
Why should you never use damaged tools?
A
They are difficult to use
B
They can break and cause injury
C
They take longer to complete a task
D
They are uncomfortable to hold
Question 120Single Answer
If you are unsure how to use a machine, what should you do?
A
Ask for help
B
Watch someone else
C
Guess and start using it
D
Read the manual later
Question 121Single Answer
Which type of gloves should be used when handling hot materials?
A
Latex gloves
B
Leather gloves
C
Cotton gloves
D
Rubber gloves
Question 122Single Answer
What should you do if an emergency alarm sounds in the workshop?
A
Ignore it
B
Evacuate immediately
C
Continue working until instructed
D
Ask your colleague what to do
Question 123Single Answer
What is a safe distance to keep combustible materials from a welding area?
A
5 feet
B
10 feet
C
15 feet
D
20 feet
Question 124Single Answer
What should you do if you suffer a minor injury in the workshop?
A
Continue working
B
Report it immediately
C
Ignore it
D
Use makeshift first aid
Question 125Single Answer
What should be done before starting work with a new material?
A
Ask a coworker how to use it
B
Read the Material Safety Data Sheet (MSDS)
C
Experiment with it to understand its properties
D
Use it as you would any other material
Question 126Single Answer
What does PPE stand for in a workshop context?
A
Personal Protective Equipment
B
Power Protective Environment
C
Personal Protection Emergency
D
Professional Protection Equipment
Question 127Single Answer
Why is good housekeeping important in a workshop?
A
It prevents accidents
B
It improves productivity
C
It maintains a professional image
D
All of the above
Question 128Single Answer
When should you inspect your tools for damage?
A
Once a month
B
Every week
C
Before each use
D
Only when they stop working
Question 129Single Answer
What is the purpose of an emergency stop button on machinery?
A
To turn off the lights
B
To shut down the machine in case of emergency
C
To stop the machine at the end of a shift
D
To reset the machine for another task
Question 130Single Answer
What is the safest way to store sharp tools in a workshop?
A
In a toolbox with a lid
B
On a table within easy reach
C
Hanging on a wall
D
In your pocket
Question 131Single Answer
What should be done if a chemical spill occurs?
A
Wipe it up with a rag
B
Inform your supervisor and follow proper cleanup procedures
C
Ignore it
D
Cover it with sawdust
Question 132Single Answer
What type of footwear is recommended in a workshop?
A
Open-toe sandals
B
Running shoes
C
Steel-toe boots
D
Slippers
Question 133Single Answer
How often should fire extinguishers be inspected in the workshop?
A
Monthly
B
Every six months
C
Annually
D
Only after use
Question 134Single Answer
Which of the following is a hazard when working with compressed air?
A
High temperatures
B
Risk of injection into the skin
C
Low noise levels
D
None of the above
Question 135Single Answer
Which tool is appropriate for cutting metal in a workshop?
A
Hacksaw
B
Wood saw
C
Scissors
D
Chisel
Question 136Single Answer
What is the purpose of ventilation in a workshop?
A
To reduce noise
B
To circulate air and remove fumes
C
To prevent dust accumulation
D
To control lighting
Question 137Single Answer
What should be done when you finish using a machine?
A
Leave it running
B
Clean it and turn it off
C
Move on to the next machine
D
Switch off the lights and leave the area
Question 138Single Answer
Why should you not wear jewelry in the workshop?
A
It looks unprofessional
B
It can get caught in machinery
C
It may interfere with tools
D
It could distract others
Question 139Single Answer
What does a yellow safety sign usually indicate?
A
General information
B
Caution or hazard
C
Emergency stop
D
Personal protective equipment required
Question 140Single Answer
When should you replace your ear protection?
A
Every day
B
When it becomes damaged
C
Once a year
D
Every week
Question 141Single Answer
How should flammable liquids be stored in the workshop?
A
In open containers
B
In sealed, approved safety containers
C
On the workshop floor
D
In paper bags
Question 142Single Answer
What is the first step in using a fire extinguisher?
A
Squeeze the handle
B
Aim the nozzle at the fire
C
Pull the pin
D
Sweep from side to side
Question 143Single Answer
Which of the following is a potential hazard when working with electricity?
A
Noise
B
Vibration
C
Electrocution
D
Sparks
Question 144Single Answer
What does a blue safety sign usually indicate?
A
Mandatory action
B
Emergency stop
C
Hazardous area
D
Safe route
Question 145Single Answer
What should be done with oily rags in the workshop?
A
Leave them on the workbench
B
Dispose of them in a metal container
C
Throw them in the trash
D
Store them with other tools
Question 146Single Answer
How should you react if you notice a coworker violating safety rules?
A
Ignore it
B
Report it to a supervisor
C
Confront them immediately
D
Let others handle it
Question 147Single Answer
What should be done if a machineโs guard is removed or broken?
A
Continue working carefully
B
Report the issue and stop using the machine
C
Fix it yourself
D
Use the machine only for light work
Question 148Single Answer
When using a power tool, what should you check before starting?
A
The power cord is intact
B
The tool is clean
C
You are wearing appropriate PPE
D
All of the above
Question 149Single Answer
Which type of fire extinguisher is suitable for flammable liquid fires?
A
Water
B
Foam
C
Dry chemical powder
D
CO2
Question 150Single Answer
What should you avoid doing when handling electrical equipment?