📚 Exam by Category
▾
Objective Questions

Latest IOCL Diploma Engineer Exam Question (Objective Questions), MCQ in English

Subjects : Domain Knowledge, Quantitative Aptitude, Logical Reasoning, English Language

Question Bank IOCL Diploma Engineer (Mechanical) Exam - English
Back to Exam

Domain Knowledge

Question 1Single Answer
The branch of engineering primarily concerned with machines, energy and manufacturing is:
  1. A
    Civil engineering
  2. B
    Chemical engineering
  3. C
    Mechanical engineering
  4. D
    Electronics engineering
Question 2Single Answer
The SI unit of force is:
  1. A
    Joule
  2. B
    Newton
  3. C
    Pascal
  4. D
    Watt
Question 3Single Answer
Work is said to be done when a force produces:
  1. A
    Displacement
  2. B
    Temperature
  3. C
    Pressure only
  4. D
    Density
Question 4Single Answer
The SI unit of work is:
  1. A
    Watt
  2. B
    Pascal
  3. C
    Newton
  4. D
    Joule
Question 5Single Answer
Power is defined as:
  1. A
    Mass per unit volume
  2. B
    Force per unit area
  3. C
    Work done per unit time
  4. D
    Energy per unit mass
Question 6Single Answer
The SI unit of power is:
  1. A
    Joule
  2. B
    Kelvin
  3. C
    Newton
  4. D
    Watt
Question 7Single Answer
Mechanical advantage of a machine is the ratio of:
  1. A
    Load to effort
  2. B
    Effort to load
  3. C
    Velocity to acceleration
  4. D
    Work input to load
Question 8Single Answer
Efficiency of an ideal machine is:
  1. A
    0%
  2. B
    100%
  3. C
    50%
  4. D
    25%
Question 9Single Answer
A lever is basically a rigid bar that turns about a fixed point called:
  1. A
    Pitch point
  2. B
    Fulcrum
  3. C
    Centre of gravity
  4. D
    Vertex
Question 10Single Answer
In a first-class lever, the fulcrum is located:
  1. A
    At the load point
  2. B
    At the effort point
  3. C
    Beyond the load
  4. D
    Between effort and load
Question 11Single Answer
A wheelbarrow is an example of a:
  1. A
    First-class lever
  2. B
    Third-class lever
  3. C
    Second-class lever
  4. D
    Compound pendulum
Question 12Single Answer
A pair of scissors is an example of a:
  1. A
    First-class lever
  2. B
    Second-class lever
  3. C
    Third-class lever
  4. D
    Hydraulic machine
Question 13Single Answer
The property of a body by virtue of which it resists change in its state of motion is:
  1. A
    Elasticity
  2. B
    Ductility
  3. C
    Plasticity
  4. D
    Inertia
Question 14Single Answer
Newton's first law of motion is also known as the law of:
  1. A
    Momentum
  2. B
    Gravitation
  3. C
    Inertia
  4. D
    Acceleration
Question 15Single Answer
Newton's second law relates force to the rate of change of:
  1. A
    Volume
  2. B
    Temperature
  3. C
    Density
  4. D
    Momentum
Question 16Single Answer
According to Newton's third law, action and reaction are:
  1. A
    Always perpendicular
  2. B
    Unequal and parallel
  3. C
    Equal and same in direction
  4. D
    Equal and opposite
Question 17Single Answer
Momentum is the product of mass and:
  1. A
    Acceleration
  2. B
    Displacement
  3. C
    Force
  4. D
    Velocity
Question 18Single Answer
The tendency of a force to rotate a body about a point is called:
  1. A
    Moment
  2. B
    Impulse
  3. C
    Pressure
  4. D
    Strain
Question 19Single Answer
The centre of gravity of a uniform circular disc lies at its:
  1. A
    Circumference
  2. B
    Edge
  3. C
    Top surface
  4. D
    Centre
Question 20Single Answer
Friction acts in a direction that:
  1. A
    Opposes relative motion
  2. B
    Assists relative motion
  3. C
    Is always vertically upward
  4. D
    Is always horizontally forward
Question 21Single Answer
Static friction acts when two contacting surfaces are:
  1. A
    Moving rapidly
  2. B
    Completely separated
  3. C
    Not sliding relative to each other
  4. D
    Melting
Question 22Single Answer
The coefficient of friction is generally:
  1. A
    Dimensionless
  2. B
    Measured in newtons
  3. C
    Measured in joules
  4. D
    Measured in watts
Question 23Single Answer
Rolling friction is generally:
  1. A
    Greater than sliding friction
  2. B
    Equal to fluid friction
  3. C
    Less than sliding friction
  4. D
    Infinite
Question 24Single Answer
Lubrication between moving surfaces primarily reduces:
  1. A
    Density
  2. B
    Volume
  3. C
    Mass
  4. D
    Friction and wear
Question 25Single Answer
The ability of a material to regain its original shape after removal of load is:
  1. A
    Plasticity
  2. B
    Brittleness
  3. C
    Elasticity
  4. D
    Hardness
Question 26Single Answer
The ability of a material to undergo permanent deformation without rupture is:
  1. A
    Plasticity
  2. B
    Elasticity
  3. C
    Brittleness
  4. D
    Rigidity
Question 27Single Answer
The ability of a material to be drawn into wires is called:
  1. A
    Ductility
  2. B
    Malleability
  3. C
    Hardness
  4. D
    Toughness
Question 28Single Answer
The ability of a metal to be hammered or rolled into thin sheets is:
  1. A
    Malleability
  2. B
    Ductility
  3. C
    Brittleness
  4. D
    Creep
Question 29Single Answer
The ability of a material to resist indentation is called:
  1. A
    Hardness
  2. B
    Plasticity
  3. C
    Conductivity
  4. D
    Porosity
Question 30Single Answer
Density is defined as:
  1. A
    Volume per unit mass only
  2. B
    Weight per unit area
  3. C
    Force per unit volume
  4. D
    Mass per unit volume
Question 31Single Answer
Specific gravity is the ratio of density of a substance to the density of:
  1. A
    Air
  2. B
    Mercury
  3. C
    Oil
  4. D
    Water
Question 32Single Answer
A machine that converts mechanical energy into electrical energy is a:
  1. A
    Pump
  2. B
    Boiler
  3. C
    Compressor
  4. D
    Generator
Question 33Single Answer
A machine that converts electrical energy into mechanical energy is a:
  1. A
    Boiler
  2. B
    Motor
  3. C
    Condenser
  4. D
    Turbine
Question 34Single Answer
A pump is primarily used to:
  1. A
    Move liquids
  2. B
    Compress solids
  3. C
    Produce electricity
  4. D
    Measure temperature
Question 35Single Answer
A compressor is primarily used for:
  1. A
    Increasing gas pressure
  2. B
    Increasing liquid density only
  3. C
    Reducing gas pressure
  4. D
    Measuring force
Question 36Single Answer
A boiler is a device used for generating:
  1. A
    Compressed air
  2. B
    Refrigerant
  3. C
    Vacuum only
  4. D
    Steam
Question 37Single Answer
A turbine converts fluid energy mainly into:
  1. A
    Nuclear energy
  2. B
    Chemical energy
  3. C
    Mechanical energy
  4. D
    Magnetic energy
Question 38Single Answer
A flywheel is mainly used to:
  1. A
    Store rotational energy
  2. B
    Increase friction
  3. C
    Reduce shaft diameter
  4. D
    Measure temperature
Question 39Single Answer
A bearing is used mainly to:
  1. A
    Measure pressure
  2. B
    Generate steam
  3. C
    Cut threads
  4. D
    Support and guide a rotating shaft
Question 40Single Answer
A coupling is used to connect:
  1. A
    Two cylinders
  2. B
    Two pistons
  3. C
    Two gears only
  4. D
    Two shafts
Question 41Single Answer
A clutch is used to:
  1. A
    Permanently weld shafts
  2. B
    Engage and disengage power transmission
  3. C
    Measure speed
  4. D
    Increase temperature
Question 42Single Answer
A brake is used primarily to:
  1. A
    Increase speed
  2. B
    Generate electricity
  3. C
    Increase pressure
  4. D
    Reduce or stop motion
Question 43Single Answer
Gears are commonly used to transmit:
  1. A
    Rotary motion and torque
  2. B
    Heat only
  3. C
    Fluid pressure
  4. D
    Electrical current
Question 44Single Answer
A belt drive is especially suitable when shafts are:
  1. A
    Coaxial only
  2. B
    Separated by a relatively large distance
  3. C
    At zero distance
  4. D
    Permanently fixed together
Question 45Single Answer
A chain drive provides:
  1. A
    Only linear motion
  2. B
    Large intentional slip
  3. C
    No torque transmission
  4. D
    Positive drive without slip
Question 46Single Answer
A spring is primarily used to:
  1. A
    Reduce density
  2. B
    Generate steam
  3. C
    Store mechanical energy
  4. D
    Melt metals
Question 47Single Answer
The main function of a gasket is to:
  1. A
    Measure length
  2. B
    Increase shaft speed
  3. C
    Produce sparks
  4. D
    Prevent leakage at joints
Question 48Single Answer
A key is used between a shaft and hub to:
  1. A
    Prevent relative rotation
  2. B
    Increase leakage
  3. C
    Increase shaft flexibility
  4. D
    Measure torque
Question 49Single Answer
A riveted joint is generally considered a:
  1. A
    Temporary joint
  2. B
    Permanent joint
  3. C
    Sliding joint
  4. D
    Flexible bearing
Question 50Single Answer
A bolted joint is normally classified as a:
  1. A
    Permanent joint
  2. B
    Temporary joint
  3. C
    Welded joint
  4. D
    Adhesive joint only
Important Questions Package

IOCL Diploma Engineer Exam Online Question Bank Package

Buy IOCL Diploma Engineer Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in IOCL Diploma Engineer question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.IOCL Diploma Engineer (Mechanical) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.IOCL Diploma Engineer (Mechanical) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.IOCL Diploma Engineer (Mechanical) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.IOCL Diploma Engineer (Mechanical) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.IOCL Diploma Engineer (Mechanical) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
6.IOCL Diploma Engineer (Mechanical) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
7.IOCL Diploma Engineer (Mechanical) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
8.IOCL Diploma Engineer (Mechanical) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam