📚 Exam by Category
▾
Objective Questions

Latest ITBP Telecommunication SI Exam Question (Objective Questions), MCQ in English

Subjects : Physics, Chemistry, Math, Electronics & Communication, Information Technology & Computer Science, Electrical, Instrumentation & Control

Question Bank ITBP Telecommunication SI Paper 2 Exam - English
Back to Exam

Physics

Question 1Single Answer
Temperature can be expressed as derived quantity in terms of
  1. A
    length and mass
  2. B
    mass and time
  3. C
    length, mass and time
  4. D
    None of these
Question 2Single Answer
Electron volt is a unit of
  1. A
    potential difference
  2. B
    charge
  3. C
    energy
  4. D
    capacity
Question 3Single Answer
Dimensions of impulse are
  1. A
    [MLT –1]
  2. B
    [MLT²]
  3. C
    [MT–2]
  4. D
    [ML–1T–3]
Question 4Single Answer
Potential is measured in
  1. A
    joule/coulomb
  2. B
    watt/coulomb
  3. C
    newton–second
  4. D
    None of these
Question 5Single Answer
One Nanometer is equal to
  1. A
    10–9m
  2. B
    10–6m
  3. C
    10–10m
  4. D
    10–3m
Question 6Single Answer
Maxwell is the unit of
  1. A
    magnetic susceptibility
  2. B
    intensity of Magnetisation
  3. C
    magnetic Flux
  4. D
    magnetic Permeability
Question 7Single Answer
Which of the following is derived physical quantity ?
  1. A
    Mass
  2. B
    Velocity
  3. C
    Length
  4. D
    Time
Question 8Single Answer
What are the units of magnetic permeability ?
  1. A
    Wb A–1 m–1
  2. B
    Wb–1 Am
  3. C
    Wb A m–1
  4. D
    Wb A–1 m
Question 9Single Answer
The dimensions of pressure gradient are
  1. A
    [ML–2 T–2]
  2. B
    [ML–2 T–1]
  3. C
    [ML–1 T–1]
  4. D
    [ML–1 T–2]
Question 10Single Answer
The dimensions of Rydberg's constant are
  1. A
    [M0L–1T]
  2. B
    [MLT–1]
  3. C
    [M0 L–1T0]
  4. D
    [ML0 T2]

Chemistry

Question 11Single Answer
Which of the following is not a synthetic fibre:
  1. A
    Anygora
  2. B
    Rayon
  3. C
    Nylon
  4. D
    Polyster
Question 12Single Answer
Which one of the following is not contained in Portland cement ?
  1. A
    Ca3Al2O6
  2. B
    Ca3SiO5
  3. C
    Ca2Si­O4
  4. D
    Ca3(PO4)2
Question 13Single Answer
What is the reson for white cement to be white ?
  1. A
    It does not contain carbon
  2. B
    It does not contain silicon
  3. C
    It does not contain iron
  4. D
    It does not contain calcium
Question 14Single Answer
Which fertilizer is assimilated directly by the plant ?
  1. A
    Super phosphate
  2. B
    Nitrolim
  3. C
    Muriate of Potash
  4. D
    Humus
Question 15Single Answer
Which of the following chemicals is used in foam fire extinguishers ?
  1. A
    Aluminium sulphate
  2. B
    Copper sulphate
  3. C
    Cobalt sulphate
  4. D
    Nickel sulphate 
Question 16Single Answer
What is a mixture of potassium nitrate, powdered charcoal and sulphur called ?
  1. A
    Glass
  2. B
    Cement
  3. C
    paint
  4. D
    Gun powder
Question 17Single Answer
Which one of the following chemicals is used in beauty parlours for hair – setting ?
  1. A
    Sulphur based
  2. B
    Phosphorus based
  3. C
    Silicon based
  4. D
    Iron based 
Question 18Single Answer
Which one of the following is used as a mordant in dyeing and tanning industry ?
  1. A
    Magnesium oxide
  2. B
    Magnesium carbonate
  3. C
    Magnesium chloride
  4. D
    Magnesium sulphate
Question 19Single Answer
Which one of the following substances is used in the manufacture of safety matches ?
  1. A
    Red phosphorus
  2. B
    White phosphorus
  3. C
    Phosphorus trioxide (P2O3)
  4. D
    Black phosphorus
Question 20Single Answer
Which one of the following polymeric materials is used for making bullet proof jacket ?
  1. A
    Nylon –6, 6
  2. B
    Rayon
  3. C
    Kevlar
  4. D
    Dacron

Math

Question 21Single Answer
The elements of the set {x : x is an integer, x2 : 4} can be represent as .....Z..... . Here, Z refers to
  1. A
    {–2, 2} 
  2. B
    {–1, 0, 1}
  3. C
    {–2, –1, 0, 1, 2}
  4. D
    {0, 1, 2}
Question 22Single Answer
 
  1. A
  2. B
  3. C
  4. D
    None of these
Question 23Single Answer
If Y = {x : x is a positive factor of the number 2p – 1(2p – 1), where 2p – 1 is a prime number}, then Y can be represent in roster form as
  1. A
    {2}
  2. B
    {1, 2}  
  3. C
    {1, 2, 22, ....., 2p – 1}
  4. D
    {1, 2, 22, 23,.... 2p – 1, (2p – 1)}
Question 24Single Answer
The set {x : x is a positive integer less than 6 and 3x – 1 is an even number} in roster form is
  1. A
    {1, 2, 3, 4, 5}
  2. B
    {1, 2, 3, 4, 5, 6}  
  3. C
    {2, 4, 6}
  4. D
    {1, 3, 5}
Question 25Single Answer
If A B and A B, then
  1. A
    A is called a proper subset of B
  2. B
    A is called a super set of B
  3. C
    A is not a subset of B 
  4. D
    B is a subset of A
Question 26Single Answer
The number of non-empty subsets of the set{1, 2, 3, 4} is
  1. A
    15
  2. B
    14
  3. C
    16
  4. D
    17
Question 27Single Answer
The number of elements of the power set of a set containing m elements is
  1. A
    2m – 1
  2. B
    m 
  3. C
    m2
  4. D
    2m
Question 28Single Answer
If A = {x : x = n2, n = 1, 2, 3}, then number of proper subsets is
  1. A
    3
  2. B
    8
  3. C
    7
  4. D
    None of these
Question 29Single Answer
If A = {x : x = 4n + 1, 2 £ n £ 5},then number of subsets of A is
  1. A
    16
  2. B
    15  
  3. C
    4 
  4. D
    None of these 
Question 30Single Answer
Let A and B be two non-empty subsets of a set X such that A is not a subset of B, then
  1. A
    A is always a subset of the complement of B
  2. B
    B is always a subset of A  
  3. C
    A and B are always disjoint
  4. D
    A and the complement of B are always non-disjoint  

Electronics & Communication

Question 31Single Answer
Which one of the following helps experimental confirmation of the Crystalline state of matter?
  1. A
    Shock compression
  2. B
    Photo emission
  3. C
    Conductivity measurements
  4. D
    X-ray diffraction
Question 32Single Answer
The electrical conductivity of pure semiconductor is:
  1. A
    Proportional to temperature
  2. B
    Increases exponentially with temperature
  3. C
    Decreases exponentially with temperature
  4. D
    Not altered with temperature
Question 33Single Answer
Consider the following statements pertaining to the resistance of a conductor:
1. Resistance can be simply defined as the ratio of voltage across the conductor to the current through the conductor. This is, in fact, Georg Ohm’s law.
2. Resistance is a function of voltage and current.
3. Resistance is a function of conductor geometry and its conductivity
Which of the above statements are correct?
  1. A
    1 and 2 only
  2. B
    2 and 3 only
  3. C
    1 and 3 only
  4. D
    1, 2 and 3
Question 34Single Answer
The ratio of ionic radii of Cations i.e.and that of Anions i.e.for stable and unstable ceramic crystal structure, is:
  1. A
    Less than unity
  2. B
    Greater than unity
  3. C
    Unity
  4. D
    Either lesser or greater than unity
Question 35Single Answer
Which one of the following statements is correct?
  1. A
    For insulators the band-gap is narrow as compared to semiconductors
  2. B
    For insulators the band-gap is relatively wide whereas for semiconductors it is narrow
  3. C
    The band-gap is narrow in width for both the insulators and conductors
  4. D
    The band-gap is equally wide for both conductors and semiconductors
Question 36Single Answer
In an extrinsic semiconductor the conductivity significantly depends upon:
  1. A
    Majority charge carriers generated due to impurity doping
  2. B
    Minority charge carriers generated due to thermal agitation
  3. C
    Majority charge carriers generated due to thermal agitation
  4. D
    Minority charge carriers generated due to impurity doping
Question 37Single Answer
In some substances when an electric field is applied the substance become polarized. The electrons and nucleii assume new geometrical positions and the mechanical dimensions are altered. This phenomenon is called:
  1. A
    Electrostriction
  2. B
    Hall-Effect
  3. C
    Polarization
  4. D
    Magnetization
Question 38Single Answer
In ferromagnetic materials, the net magnetic moment created due to magnetization by an applied field as:
  1. A
    Normal to the applied field
  2. B
    Adds to the applied field
  3. C
    In line with magneto motive force
  4. D
    Subtracts from the applied field
Question 39Single Answer
At what temperatures domains lose their ferromagnetic properties?
  1. A
    Above ferromagnetic Curie temperature
  2. B
    Below paramagnetic Curie temperature
  3. C
    Above 4
  4. D
    At room temperature
Question 40Single Answer
Which of the following materials does not have paramagnetic properties?
1. Rare earth elements (with incomplete shell)
2. Transition elements
3. Magnesium oxide
Select the correct answer from the codes given below:
  1. A
    1 only
  2. B
    2 only
  3. C
    3 only
  4. D
    1 and 2
Question 41Single Answer
In a superconducting magnet, wires of superconducting material are embedded in the thick copper matrix, because while the material is in the superconducting state:
  1. A
    The leakage current passes through copper part.
  2. B
    Copper part helps in conducting heat away from the superconductor
  3. C
    Copper part helps in overcoming the mechanical stress
  4. D
    Copper acts as an insulating cover for superconductor
Question 42Single Answer
The crystal structure of some Ceramic materials may be thought of being composed of electrically charged Cations and Anions, instead of Atoms, and as such:
  1. A
    The Cations are negatively charged, because they have given up their valence electrons to Anions which are positively charged.
  2. B
    The Cations are positively charged, because they have given up their valence electrons to Anions which are negatively charged.
  3. C
    The Cations are positively charged, because they have added one electron to their valence electron borrowing from Anions which are negatively charged.
  4. D
    The Cations are negatively charged, as they are non-metallic whereas Anions are positively charged being metallic.
Question 43Single Answer
Manganin alloy used for making resistors for laboratory instruments contains:
  1. A
    Copper, Aluminium and Manganese
  2. B
    Copper, Nickel and Manganese
  3. C
    Aluminium, Nickel and Manganese
  4. D
    Chromium, Nickel and manganese
Question 44Single Answer
A rolled-paper capacitor of value 0.02  is to be constructed using two strips of aluminiumof width 6 cm, and wax impregnated paper of thickness 0.06 mm whose relative permittivity is 3. The length of foil strips should be:
  1. A
    0.3765 m
  2. B
    0.4765 m
  3. C
    0.5765 m
  4. D
    0.7765 m
Question 45Single Answer
In a semiconductor diode, cut-in voltage is the voltage:
  1. A
    up to which the current is zero
  2. B
    up to which the current is very small
  3. C
    at which the current is 10% of the maximum rated current
  4. D
    at which depletion layer is formed
Question 46Single Answer
Which of the following regions of operation are mainly responsible for heating of the transistor under switching operation?
1. Saturation region
2. Cut-off region
3. Transition from saturation to cut-off
4. Transition from cut-off to saturation
Select the correct answer using the codes given below
  1. A
    1, 2 and 4 only
  2. B
    1, 3 and 4 only
  3. C
    2 and 3 only
  4. D
    1 and 3 only
Question 47Single Answer
In a sinusoidal oscillator, sustained oscillations will be produced only if the loop gain (at the oscillation frequency) is
  1. A
    Less than unity but not zero
  2. B
    Zero
  3. C
    Unity
  4. D
    Greater than unity
Question 48Single Answer
The Class-B push-pull amplifier is an efficient two –transistor circuit, in which the two transistors operate in the following way:
  1. A
    Both transistors operate in the active region throughout the negative ac cycle
  2. B
    Both transistors operate in the active region for more than half-cycle but less than a whole cycle
  3. C
    One transistor conducts during the positive half-cycle and the other during the negative half-cycle
  4. D
    Full supply voltage appears across each of the transistors
Question 49Single Answer
PAC stands for______.
  1. A
    Permanent angle converter
  2. B
    Phase angle converter
  3. C
    Phase angle components
  4. D
    Phase angle capacitor
  5. E
    None of these
Question 50Single Answer
For normal operation of a transistor
  1. A
    Forward bias the emitter diode and reverse bias the collector diode
  2. B
    Forward bias the emitter diode as well as the collector diode
  3. C
    Reverse bias the emitter diode as well as the collector diode
  4. D
    Reverse bias the emitter diode and forward bias the collector diode
Important Questions Package

ITBP Telecommunication SI Exam Online Question Bank Package

Buy ITBP Telecommunication SI Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in ITBP Telecommunication SI question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.ITBP Telecommunication SI Paper 1 Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.ITBP Telecommunication SI Paper 1 Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.ITBP Telecommunication SI Paper 1 Exam - Hindi
Description : 3000 Question with Answer
₹181 [₹500]
4.ITBP Telecommunication SI Paper 1 Exam - Hindi
Description : 4000 Question with Answer
₹201 [₹500]
5.ITBP Telecommunication SI Paper 1 Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
6.ITBP Telecommunication SI Paper 1 Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
7.ITBP Telecommunication SI Paper 1 Exam - English
Description : 3000 Question with Answer
₹181 [₹500]
8.ITBP Telecommunication SI Paper 1 Exam - English
Description : 4000 Question with Answer
₹201 [₹500]
9.ITBP Telecommunication SI Paper 2 Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
10.ITBP Telecommunication SI Paper 2 Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
11.ITBP Telecommunication SI Paper 2 Exam - Hindi
Description : 3000 Question with Answer
₹181 [₹500]
12.ITBP Telecommunication SI Paper 2 Exam - Hindi
Description : 4000 Question with Answer
₹201 [₹500]
13.ITBP Telecommunication SI Paper 2 Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
14.ITBP Telecommunication SI Paper 2 Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
15.ITBP Telecommunication SI Paper 2 Exam - English
Description : 3000 Question with Answer
₹181 [₹500]
16.ITBP Telecommunication SI Paper 2 Exam - English
Description : 4000 Question with Answer
₹201 [₹500]
17.ITBP Telecommunication SI Paper 1 Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
18.ITBP Telecommunication SI Paper 2 Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
19.ITBP Telecommunication SI Paper 1 Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
20.ITBP Telecommunication SI Paper 2 Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
21.ITBP Telecommunication SI Paper 1 Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
22.ITBP Telecommunication SI Paper 2 Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
23.ITBP Telecommunication SI Paper 1 Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
24.ITBP Telecommunication SI Paper 2 Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
25.ITBP Telecommunication SI Paper-II Exam - Hindi (Old)
Description : 1000 Question with Answer.
₹101 [₹500]
26.ITBP Telecommunication SI Paper-II Exam - English (Old)
Description : 2000 Question with Answer.
₹151 [₹500]
Back to Exam
Question for ITBP Telecommunication (Sub Inspector) 2026 - Quiz / Questions / MCQ - Toppersexam