Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
📚 Exam by Category
▾
Objective Questions

Latest MPESB ITI Training Officer Electrician Exam Question (Objective Questions), MCQ in English

Subjects : Professional Knowledge, General Knowledge, Science & Maths, Logical Reasoning, Basic Knowledge of Computer Operation

Question Bank MPESB ITI Training Officer (Electrician) Exam - English
Back to Exam

Professional Knowledge

Question 1Single Answer
Which instrument is used to check straightness of a profile?
  1. A
    Try suare
  2. B
    Divider
  3. C
    Vernier caliper
  4. D
    Straight edge
Question 2Single Answer
Which tool is used to check right angle accuracy?
  1. A
    Divider
  2. B
    Try suare
  3. C
    Hammer
  4. D
    File
Question 3Single Answer
Which unit is commonly used in engineering drawings?
  1. A
    Millimeter
  2. B
    Foot
  3. C
    Inch
  4. D
    Yard
Question 4Single Answer
Which tool is used for marking lines on metal surfaces?
  1. A
    Chisel
  2. B
    Scriber
  3. C
    Punch
  4. D
    File
Question 5Single Answer
What is used to mark center points accurately?
  1. A
    Dot punch
  2. B
    Hammer
  3. C
    Center punch
  4. D
    Divider
Question 6Single Answer
Which safety euipment protects eyes during cutting operations?
  1. A
    Gloves
  2. B
    Helmet
  3. C
    Apron
  4. D
    Goggles
Question 7Single Answer
Which file is used for rough filing?
  1. A
    Smooth file
  2. B
    Needle file
  3. C
    Dead smooth file
  4. D
    Bastard file
Question 8Single Answer
What should be checked before starting profile preparation?
  1. A
    Paint uality
  2. B
    Drawing dimensions
  3. C
    Machine speed
  4. D
    Lubrication
Question 9Single Answer
Which tool is used to measure external dimensions?
  1. A
    Inside caliper
  2. B
    Outside caliper
  3. C
    Divider
  4. D
    Punch
Question 10Single Answer
Which operation ensures accurate shape as per drawing?
  1. A
    Painting
  2. B
    Polishing
  3. C
    Marking
  4. D
    Welding
Question 11Single Answer
What is the purpose of clamping the job securely?
  1. A
    Avoid vibration
  2. B
    Increase speed
  3. C
    Improve finish
  4. D
    Save time
Question 12Single Answer
Which hammer is commonly used in fitting work?
  1. A
    Claw hammer
  2. B
    Sledge hammer
  3. C
    Ball peen hammer
  4. D
    Wooden mallet
Question 13Single Answer
Which tool is used to remove burrs from metal edges?
  1. A
    Chisel
  2. B
    Punch
  3. C
    File
  4. D
    Divider
Question 14Single Answer
What should be worn to protect hands during filing?
  1. A
    Gloves
  2. B
    Goggles
  3. C
    Helmet
  4. D
    Apron
Question 15Single Answer
Which vice is used in fitting work?
  1. A
    Machine vice
  2. B
    Pipe vice
  3. C
    Bench vice
  4. D
    Hand vice
Question 16Single Answer
What indicates correct accuracy of a prepared profile?
  1. A
    Smooth surface
  2. B
    Matches drawing dimensions
  3. C
    Shiny finish
  4. D
    No scratches
Question 17Single Answer
Which measuring instrument gives least count of 0.02 mm?
  1. A
    Steel rule
  2. B
    Vernier caliper
  3. C
    Measuring tape
  4. D
    Divider
Question 18Single Answer
Which operation is done after marking?
  1. A
    Painting
  2. B
    Filing
  3. C
    Storage
  4. D
    Inspection
Question 19Single Answer
Which PPE is compulsory in workshop?
  1. A
    Cap
  2. B
    Ring
  3. C
    Goggles
  4. D
    Watch
Question 20Single Answer
Which drawing shows exact dimensions of a job?
  1. A
    Layout drawing
  2. B
    Detail drawing
  3. C
    Assembly drawing
  4. D
    Perspective drawing
Question 21Single Answer
What is the purpose of a surface plate?
  1. A
    Cutting
  2. B
    Grinding
  3. C
    Drilling
  4. D
    Checking flatness
Question 22Single Answer
Which tool helps draw arcs on metal?
  1. A
    Divider
  2. B
    Punch
  3. C
    Chisel
  4. D
    File
Question 23Single Answer
Which file shape is used for suare holes?
  1. A
    Flat file
  2. B
    Round file
  3. C
    Suare file
  4. D
    Half-round file
Question 24Single Answer
Which safety rule must be followed during fitting work?
  1. A
    Proper clamping
  2. B
    Loose clothing
  3. C
    High speed
  4. D
    Wet floor
Question 25Single Answer
Which operation ensures smooth finish?
  1. A
    Rough filing
  2. B
    Finish filing
  3. C
    Chipping
  4. D
    Marking
Question 26Single Answer
Which instrument is used to check flatness of a surface?
  1. A
    Try suare
  2. B
    Caliper
  3. C
    Divider
  4. D
    Surface plate
Question 27Single Answer
Which tool is used to mark circles on metal sheets?
  1. A
    Divider
  2. B
    Scriber
  3. C
    Punch
  4. D
    Chisel
Question 28Single Answer
Which file is used for curved surfaces?
  1. A
    Half round file
  2. B
    Suare file
  3. C
    Round file
  4. D
    Flat file
Question 29Single Answer
What is the purpose of an odd leg caliper?
  1. A
    Marking parallel lines
  2. B
    Measuring thickness
  3. C
    Checking depth
  4. D
    Cutting metal
Question 30Single Answer
Which safety rule should be followed while using a bench vice?
  1. A
    Proper clamping
  2. B
    Over tightening
  3. C
    Loose clamping
  4. D
    Side clamping
Question 31Single Answer
Which instrument is used for measuring internal dimensions?
  1. A
    Outside caliper
  2. B
    Steel rule
  3. C
    Vernier caliper
  4. D
    Inside caliper
Question 32Single Answer
Which file has teeth on one side only?
  1. A
    Hand file
  2. B
    Flat file
  3. C
    Suare file
  4. D
    Round file
Question 33Single Answer
Which PPE protects hands from sharp edges?
  1. A
    Helmet
  2. B
    Apron
  3. C
    Goggles
  4. D
    Gloves
Question 34Single Answer
What is the purpose of a dot punch?
  1. A
    Making holes
  2. B
    Heavy marking
  3. C
    Light marking
  4. D
    Cutting metal
Question 35Single Answer
Which drawing shows all parts assembled together?
  1. A
    Detail drawing
  2. B
    Layout drawing
  3. C
    Assembly drawing
  4. D
    Sectional drawing
Question 36Single Answer
Which operation is performed after rough filing?
  1. A
    Chipping
  2. B
    Finish filing
  3. C
    Marking
  4. D
    Drilling
Question 37Single Answer
Which safety practice avoids injury during filing?
  1. A
    High speed filing
  2. B
    Loose grip
  3. C
    Using file with handle
  4. D
    Bare tang
Question 38Single Answer
Which tool is used to remove sharp edges?
  1. A
    Punch
  2. B
    Chisel
  3. C
    Hammer
  4. D
    File
Question 39Single Answer
Which instrument ensures perpendicularity of surfaces?
  1. A
    Try suare
  2. B
    Divider
  3. C
    Caliper
  4. D
    Steel rule
Question 40Single Answer
Which type of file is used for precision work?
  1. A
    Bastard file
  2. B
    Second cut file
  3. C
    Smooth file
  4. D
    Rough file
Question 41Single Answer
Which material is commonly used for surface plates?
  1. A
    Cast iron
  2. B
    Steel
  3. C
    Aluminium
  4. D
    Brass
Question 42Single Answer
Which marking medium is applied on metal surface before marking?
  1. A
    Prussian blue
  2. B
    Chalk
  3. C
    Oil
  4. D
    Water
Question 43Single Answer
Which PPE is mandatory for eye protection?
  1. A
    Gloves
  2. B
    Helmet
  3. C
    Shoes
  4. D
    Goggles
Question 44Single Answer
What should be done before starting bench work?
  1. A
    Increase speed
  2. B
    Remove handle
  3. C
    Inspect tools
  4. D
    Wear loose clothes
Question 45Single Answer
Which file is used for narrow slots?
  1. A
    Flat file
  2. B
    Round file
  3. C
    Half round file
  4. D
    Needle file
Question 46Single Answer
Which measurement tool is most accurate?
  1. A
    Steel rule
  2. B
    Measuring tape
  3. C
    Vernier caliper
  4. D
    Divider
Question 47Single Answer
Which drawing symbol represents diameter?
  1. A
    R
  2. B
    L
  3. C
    Ø
  4. D
    A
Question 48Single Answer
Which safety precaution prevents slipping of job?
  1. A
    Proper clamping
  2. B
    Lubrication
  3. C
    High pressure
  4. D
    Loose holding
Question 49Single Answer
Which file has double cut teeth?
  1. A
    Smooth file
  2. B
    Bastard file
  3. C
    Hand file
  4. D
    Needle file
Question 50Single Answer
What is the purpose of bench vice jaws?
  1. A
    Cutting
  2. B
    Holding workpiece
  3. C
    Measuring
  4. D
    Marking
Important Questions Package

MPESB ITI Training Officer Electrician Exam Online Question Bank Package

Buy MPESB ITI Training Officer Electrician Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in MPESB ITI Training Officer Electrician question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.MPESB ITI Training Officer (Electrician) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.MPESB ITI Training Officer (Electrician) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.MPESB ITI Training Officer (Electrician) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.MPESB ITI Training Officer (Electrician) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.MPESB ITI Training Officer (Electrician) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
6.MPESB ITI Training Officer (Electrician) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
7.MPESB ITI Training Officer (Electrician) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
8.MPESB ITI Training Officer (Electrician) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam