Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
📚 Exam by Category
▾
Objective Questions

Latest MPESB ITI Training Officer Machinist Exam Question (Objective Questions), MCQ in English

Subjects : Professional Knowledge, Science & Maths, General Knowledge, Logical Reasoning, Basic Computer Knowledge

Question Bank MPESB ITI Training Officer (Machinist) Exam - English
Back to Exam

Professional Knowledge

Question 1Single Answer
What is the most important PPE to wear while performing chipping or chiseling operation?
  1. A
    Safety goggles?
  2. B
    Ear plugs
  3. C
    Face mask
  4. D
    Leather apron
Question 2Single Answer
The primary function of a scriber in bench work is?
  1. A
    To measure length
  2. B
    To mark fine lines on metal surface?
  3. C
    To punch center
  4. D
    To check flatness
Question 3Single Answer
Which punch is used to make small indentations on layout lines for better visibility?
  1. A
    Center punch
  2. B
    Prick punch?
  3. C
    Dot punch
  4. D
    Drift punch
Question 4Single Answer
The standard accuracy expected in basic bench fitting operations as per ITI Machinist trade is?
  1. A
    ±1 mm
  2. B
    ±0.01 mm
  3. C
    ±0.05 mm
  4. D
    ±0.25 mm?
Question 5Single Answer
In hacksawing, the blade should be tensioned using?
  1. A
    Wing nut or tension screw?
  2. B
    Handle rotation
  3. C
    Frame adjustment
  4. D
    Blade teeth
Question 6Single Answer
Which file cut is the coarsest and used for heavy stock removal?
  1. A
    Bastard?
  2. B
    Smooth
  3. C
    Second cut
  4. D
    Dead smooth
Question 7Single Answer
The angle of the cutting edge of a flat chisel is generally?
  1. A
    60°–70°?
  2. B
    35°–40°
  3. C
    90°
  4. D
    45°
Question 8Single Answer
Which tool is used as a reference plane for marking and checking flatness?
  1. A
    Surface plate?
  2. B
    Try square
  3. C
    Vernier caliper
  4. D
    Divider
Question 9Single Answer
The least count of a standard steel rule used in bench work is?
  1. A
    0.5 mm
  2. B
    1 mm?
  3. C
    0.02 mm
  4. D
    0.1 mm
Question 10Single Answer
Which caliper is used to mark lines parallel to an edge?
  1. A
    Odd leg caliper (Hermaphrodite)?
  2. B
    Inside caliper
  3. C
    Firm joint caliper
  4. D
    Spring divider
Question 11Single Answer
What is the direction of teeth when fitting a hacksaw blade correctly?
  1. A
    Towards the handle
  2. B
    Upwards
  3. C
    Away from the handle?
  4. D
    Sideways
Question 12Single Answer
Which file is best suited for filing internal curved surfaces?
  1. A
    Flat file
  2. B
    Square file
  3. C
    Half round file?
  4. D
    Triangular file
Question 13Single Answer
The main purpose of a center punch is?
  1. A
    To mark layout lines
  2. B
    To remove burrs
  3. C
    To check squareness
  4. D
    To create a starting point for drilling?
Question 14Single Answer
During filing, cutting action takes place on?
  1. A
    Forward stroke?
  2. B
    Return stroke
  3. C
    Both strokes
  4. D
    Circular motion
Question 15Single Answer
Which measuring tool has a ratchet thimble for uniform pressure?
  1. A
    Outside micrometer?
  2. B
    Vernier caliper
  3. C
    Steel rule
  4. D
    Try square
Question 16Single Answer
The try square is mainly used to check?
  1. A
    90° angle and flatness?
  2. B
    Length
  3. C
    Diameter
  4. D
    Depth
Question 17Single Answer
Which hacksaw blade TPI (teeth per inch) is suitable for cutting mild steel bar of 10 mm thickness?
  1. A
    14 TPI
  2. B
    32 TPI
  3. C
    24 TPI
  4. D
    18 TPI?
Question 18Single Answer
What is applied on metal surface before marking to make scribed lines clearly visible?
  1. A
    Layout blue or chalk?
  2. B
    Oil
  3. C
    Coolant
  4. D
    Grease
Question 19Single Answer
Which file produces the finest surface finish among common files?
  1. A
    Bastard
  2. B
    Second cut
  3. C
    Dead smooth?
  4. D
    Smooth
Question 20Single Answer
The purpose of soft jaws (copper or aluminium) in bench vice is?
  1. A
    Increase gripping force
  2. B
    Reduce vice weight
  3. C
    Protect finished job surface?
  4. D
    Cool the job
Question 21Single Answer
Which tool is used to transfer and mark equal divisions or arcs?
  1. A
    Scriber
  2. B
    Odd leg caliper
  3. C
    Center punch
  4. D
    Divider?
Question 22Single Answer
The least count of a standard vernier caliper used in ITI workshop is?
  1. A
    0.1 mm
  2. B
    0.01 mm
  3. C
    0.02 mm?
  4. D
    0.05 mm
Question 23Single Answer
While chiseling, the chisel should be held at an angle of approximately?
  1. A
    40°–50°?
  2. B
    20°–30°
  3. C
    60°–70°
  4. D
    90°
Question 24Single Answer
What is draw filing primarily used for?
  1. A
    Producing smooth and flat surface?
  2. B
    Heavy stock removal
  3. C
    Curved filing
  4. D
    Rough shaping
Question 25Single Answer
Which punch has a 60° included angle and is used for light marking?
  1. A
    Center punch
  2. B
    Prick punch
  3. C
    Dot punch?
  4. D
    Drift punch
Question 26Single Answer
The main scale division on a standard vernier caliper is?
  1. A
    0.02 mm
  2. B
    0.5 mm
  3. C
    1 mm?
  4. D
    0.1 mm
Question 27Single Answer
Which file is double cut on both faces and single cut on edges?
  1. A
    Round file
  2. B
    Flat file?
  3. C
    Square file
  4. D
    Knife edge file
Question 28Single Answer
Safety precaution while using hammer and chisel includes?
  1. A
    Chiseling towards body
  2. B
    Wearing safety goggles and directing chips away?
  3. C
    Using bare hands
  4. D
    Chiseling in dark
Question 29Single Answer
The thimble of micrometer usually has how many divisions?
  1. A
    100?
  2. B
    50
  3. C
    25
  4. D
    10
Question 30Single Answer
Which tool is never struck with hammer in bench work?
  1. A
    Center punch
  2. B
    Chisel
  3. C
    File?
  4. D
    Dot punch
Question 31Single Answer
Cross filing is done to?
  1. A
    Achieve mirror finish
  2. B
    Remove heavy stock rapidly?
  3. C
    File internal holes
  4. D
    Produce curves
Question 32Single Answer
The purpose of zero error check in vernier caliper is done by?
  1. A
    Opening jaws fully
  2. B
    Measuring known standard
  3. C
    Closing jaws completely?
  4. D
    Using micrometer
Question 33Single Answer
Which file is used for filing square holes and keyways?
  1. A
    Half round
  2. B
    Round file
  3. C
    Square file?
  4. D
    Triangular file
Question 34Single Answer
In bench work, filing should be done with?
  1. A
    Short jerky strokes
  2. B
    Full length smooth strokes?
  3. C
    Circular motion only
  4. D
    No stroke
Question 35Single Answer
The anvil and spindle in micrometer are made of?
  1. A
    Hardened steel?
  2. B
    Mild steel
  3. C
    Cast iron
  4. D
    Aluminium
Question 36Single Answer
Which tool is used to check parallelism using surface plate?
  1. A
    Surface gauge?
  2. B
    Divider
  3. C
    Try square
  4. D
    Vernier caliper
Question 37Single Answer
The main cause of hacksaw blade breakage is?
  1. A
    Too little tension or twisting?
  2. B
    Too much tension
  3. C
    High speed
  4. D
    Soft material
Question 38Single Answer
Which PPE is recommended while filing sharp edges?
  1. A
    Safety goggles only
  2. B
    Apron
  3. C
    Ear plugs
  4. D
    Hand gloves?
Question 39Single Answer
The tang of a file is fitted into?
  1. A
    Vice
  2. B
    Surface plate
  3. C
    Wooden handle?
  4. D
    Chuck
Question 40Single Answer
Which caliper is used for measuring internal dimensions?
  1. A
    Inside caliper?
  2. B
    Outside caliper
  3. C
    Hermaphrodite caliper
  4. D
    Divider
Question 41Single Answer
What is the function of a feeler gauge in bench work?
  1. A
    Measure length
  2. B
    File flat
  3. C
    Mark circles
  4. D
    Check gap or clearance?
Question 42Single Answer
Which chisel is used for cutting V-grooves?
  1. A
    Diamond point chisel?
  2. B
    Flat chisel
  3. C
    Cross cut chisel
  4. D
    Half round nose chisel
Question 43Single Answer
The reading accuracy of a good bench micrometer is?
  1. A
    ±0.1 mm
  2. B
    ±0.001 mm
  3. C
    ±0.01 mm?
  4. D
    ±0.05 mm
Question 44Single Answer
In marking out, parallel lines are scribed using?
  1. A
    Divider
  2. B
    Center punch
  3. C
    Try square
  4. D
    Surface gauge?
Question 45Single Answer
Which file should not be used on very hard material?
  1. A
    Bastard file
  2. B
    Smooth file?
  3. C
    Dead smooth file
  4. D
    All files can be used
Question 46Single Answer
The wing nut on hacksaw frame is used to?
  1. A
    Hold blade
  2. B
    Change direction
  3. C
    Adjust tension?
  4. D
    Measure cut
Question 47Single Answer
Which tool is used for scribing circles of large diameter?
  1. A
    Scriber
  2. B
    Odd leg caliper
  3. C
    Divider with long legs?
  4. D
    Try square
Question 48Single Answer
What should be done after filing to remove burrs?
  1. A
    Leave as it is
  2. B
    Drilling
  3. C
    Hammering
  4. D
    Light filing or deburring?
Question 49Single Answer
The least count of vernier height gauge commonly used is?
  1. A
    0.1 mm
  2. B
    0.05 mm
  3. C
    0.02 mm?
  4. D
    1 mm
Question 50Single Answer
Which safety rule must be followed while using bench vice?
  1. A
    Over-tighten job
  2. B
    Keep hands clear of jaws?
  3. C
    Use vice without base
  4. D
    Mount vice loosely
Important Questions Package

MPESB ITI Training Officer Machinist Exam Online Question Bank Package

Buy MPESB ITI Training Officer Machinist Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in MPESB ITI Training Officer Machinist question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.MPESB ITI Training Officer (Machinist) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.MPESB ITI Training Officer (Machinist) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.MPESB ITI Training Officer (Machinist) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.MPESB ITI Training Officer (Machinist) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.MPESB ITI Training Officer (Machinist) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
6.MPESB ITI Training Officer (Machinist) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
7.MPESB ITI Training Officer (Machinist) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
8.MPESB ITI Training Officer (Machinist) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam