Download AppGovt. JobsFree G.K. & Current AffairsScholarshipBlog
Free PracticeContact
📚 Exam by Category
▾
Objective Questions

Latest MPESB ITI Training Officer Turner Exam Question (Objective Questions), MCQ in English

Subjects : Turner, Science & Maths, General Knowledge, Logical Reasoning, Basic Computer Knowledge

Question Bank MPESB ITI Training Officer (Turner) Exam - English
Back to Exam

Turner

Question 1Single Answer
Which is the most essential Personal Protective Equipment (PPE) to be worn while working in a fitting shop?
  1. A
    Safety helmet only
  2. B
    Leather apron only
  3. C
    Safety goggles or spectacles
  4. D
    Cotton gloves
Question 2Single Answer
What does the 'S' in 5S methodology stand for in workshop organization?
  1. A
    Sort, Set in order, Shine, Standardize, Sustain
  2. B
    Safety, Speed, Skill, Save, Secure
  3. C
    Sweep, Store, Shine, Sort, Sustain
  4. D
    Sort, Shine, Store, Standardize, Safety
Question 3Single Answer
How should metal chips and swarf be disposed of safely in the workshop?
  1. A
    Thrown directly into dustbin
  2. B
    Collected in a separate metal container and disposed as per hazardous waste rules
  3. C
    Left on the floor
  4. D
    Mixed with oil waste
Question 4Single Answer
Which PPE is mandatory while using a hacksaw or file in fitting operations?
  1. A
    Safety shoes
  2. B
    Hand gloves only
  3. C
    Ear plugs Correct
  4. D
    Safety goggles and hand protection gloves
Question 5Single Answer
What is the purpose of 'Shine' in 5S methodology?
  1. A
    Cleaning and maintaining equipment to detect abnormalities early
  2. B
    Sorting unnecessary items
  3. C
    Setting tools in order
  4. D
    Sustaining discipline
Question 6Single Answer
While marking on metal, which tool requires wearing safety goggles?
  1. A
    Steel rule
  2. B
    Centre punch
  3. C
    Scriber
  4. D
    Try square
Question 7Single Answer
What is the safe way to remove sharp metal burrs after filing?
  1. A
    Use bare hands
  2. B
    Use a file or deburring tool wearing gloves
  3. C
    Hammer it flat
  4. D
    Leave as it is
Question 8Single Answer
Which fire extinguisher is suitable for electrical fires in the workshop?
  1. A
    CO2 type
  2. B
    Foam type
  3. C
    Water type
  4. D
    Dry powder type Correct
Question 9Single Answer
In 5S, 'Standardize' means?
  1. A
    Cleaning machines
  2. B
    Sorting tools
  3. C
    Creating visual standards and procedures to maintain the first three S
  4. D
    Sustaining habits
Question 10Single Answer
How should used cutting oil rags be disposed of safely?
  1. A
    Thrown in general dustbin
  2. B
    Mixed with water
  3. C
    Burned in open
  4. D
    Collected in a metal container with lid to prevent spontaneous combustion
Question 11Single Answer
What is the primary function of marking in fitting operations?
  1. A
    To measure weight
  2. B
    To decorate the job
  3. C
    To provide guidelines for accurate cutting, filing and drilling
  4. D
    To paint the surface
Question 12Single Answer
Which tool is used for rough marking on metal surfaces?
  1. A
    Centre punch
  2. B
    Glass plate scriber
  3. C
    Odd leg caliper
  4. D
    Divider
Question 13Single Answer
What is the correct stroke direction while using a hacksaw?
  1. A
    Push forward only (cutting stroke) and pull back lightly
  2. B
    Pull only
  3. C
    Both directions equal force
  4. D
    Circular motion
Question 14Single Answer
To achieve dimensional accuracy in filing, which file is used for finishing?
  1. A
    Smooth file
  2. B
    Bastard file
  3. C
    Second cut file
  4. D
    Rough file
Question 15Single Answer
What is the purpose of cross filing in fitting?
  1. A
    To produce diagonal marks for final filing
  2. B
    To produce flat surface
  3. C
    To remove large amount of material quickly
  4. D
    To sharpen edges Correct
Question 16Single Answer
While filing, the job should be held in vice at what height?
  1. A
    Shoulder level
  2. B
    Elbow level
  3. C
    Knee level
  4. D
    Chest level
Question 17Single Answer
What is the angle of point for a general purpose centre punch?
  1. A
    120°
  2. B
    90°
  3. C
    60°
  4. D
    30°
Question 18Single Answer
Which type of file has teeth cut in one direction only?
  1. A
    Curved cut file
  2. B
    Double cut file
  3. C
    Single cut file
  4. D
    Rasp cut file
Question 19Single Answer
What should be done to prevent the hacksaw blade from breaking?
  1. A
    Use proper tension and light pressure on return stroke
  2. B
    Apply heavy pressure on return stroke
  3. C
    Use without coolant
  4. D
    Cut at high speed always
Question 20Single Answer
For filing cast iron, which cutting fluid is generally used?
  1. A
    Dry or kerosene
  2. B
    Soluble oil
  3. C
    Water
  4. D
    No fluid needed
Question 21Single Answer
What is the name of the machine used for drilling holes in bench fitting shop?
  1. A
    Pillar drilling machine
  2. B
    Bench drilling machine
  3. C
    Radial drilling machine
  4. D
    Portable drilling machine
Question 22Single Answer
The angle at the drill point for general purpose drilling in mild steel is?
  1. A
    135°
  2. B
    90°
  3. C
    118°
  4. D
    60°
Question 23Single Answer
How many flutes are present in a standard twist drill?
  1. A
    Two
  2. B
    Three
  3. C
    Four
  4. D
    One
Question 24Single Answer
What is the lip relief angle in a twist drill?
  1. A
    30°
  2. B
    118°
  3. C
    59°
  4. D
    8° to 12°
Question 25Single Answer
The web in twist drill is?
  1. A
    The cutting edge
  2. B
    The central core connecting two flutes
  3. C
    The shank
  4. D
    The margin
Question 26Single Answer
For tapping internal threads, the drill size is equal to?
  1. A
    Major diameter minus pitch
  2. B
    Minor diameter
  3. C
    Core diameter
  4. D
    Nominal diameter
Question 27Single Answer
Which tap is used first for cutting internal threads?
  1. A
    Taper tap
  2. B
    Plug tap
  3. C
    Bottoming tap
  4. D
    Intermediate tap
Question 28Single Answer
The die is used for?
  1. A
    Cutting external threads
  2. B
    Cutting internal threads
  3. C
    Drilling holes
  4. D
    Filing surfaces
Question 29Single Answer
What is the helix angle in a standard twist drill?
  1. A
    59°
  2. B
    118°
  3. C
    20° to 30°
  4. D
    12°
Question 30Single Answer
While drilling, the work should be clamped to?
  1. A
    Prevent rotation and lifting
  2. B
    Increase speed
  3. C
    Reduce vibration only
  4. D
    For decoration
Question 31Single Answer
What PPE is required while operating bench drilling machine?
  1. A
    Ear muffs only
  2. B
    Only helmet
  3. C
    Safety goggles, apron and gloves
  4. D
    No PPE needed
Question 32Single Answer
The margin on twist drill is for?
  1. A
    Cutting action
  2. B
    Guiding the drill
  3. C
    Providing land to reduce friction
  4. D
    Shank holding
Question 33Single Answer
For tapping M10 × 1.5, the tap drill size is?
  1. A
    10 mm
  2. B
    8.5 mm
  3. C
    9 mm
  4. D
    7.5 mm
Question 34Single Answer
What is the included angle of drill point for drilling brass?
  1. A
    135°
  2. B
    118°
  3. C
    90° to 100°
  4. D
    60°
Question 35Single Answer
While using die for external threading, the rod should be?
  1. A
    Threaded already
  2. B
    Square cut
  3. C
    Tapered
  4. D
    Chamfered at end
Question 36Single Answer
The flute in twist drill is for?
  1. A
    Point angle
  2. B
    Cutting edges
  3. C
    Shank
  4. D
    Removing chips and allowing coolant
Question 37Single Answer
What is the purpose of pilot hole before tapping?
  1. A
    To guide the tap and reduce torque
  2. B
    To increase speed
  3. C
    For decoration
  4. D
    To enlarge hole
Question 38Single Answer
In bench drilling, feed is given by?
  1. A
    Foot pedal
  2. B
    Automatic feed
  3. C
    Hand feed lever
  4. D
    Motor speed
Question 39Single Answer
Which tap has no chamfer and is used for blind holes?
  1. A
    Taper tap
  2. B
    Bottoming tap
  3. C
    Plug tap
  4. D
    Gun tap
Question 40Single Answer
The shank of twist drill is generally?
  1. A
    Straight or taper
  2. B
    Square
  3. C
    Hexagonal
  4. D
    Round only
Question 41Single Answer
What is the first step in 5S implementation?
  1. A
    Sort (Seiri) - remove unnecessary items
  2. B
    Shine
  3. C
    Standardize
  4. D
    Sustain
Question 42Single Answer
While hacksawing, the blade teeth should point?
  1. A
    Upward
  2. B
    Towards the operator
  3. C
    Sideways
  4. D
    Away from the operator (forward)
Question 43Single Answer
For filing aluminium, which file cut is preferred?
  1. A
    Curved file
  2. B
    Double cut file
  3. C
    Rasp file
  4. D
    Single cut file
Question 44Single Answer
What is the safe distance to stand while using centre punch?
  1. A
    Behind the job
  2. B
    Very close
  3. C
    At arm's length
  4. D
    No distance
Question 45Single Answer
In 5S, 'Sustain' means?
  1. A
    Cleaning
  2. B
    Sorting
  3. C
    Maintaining discipline through training and audits
  4. D
    Ordering
Question 46Single Answer
Used grinding wheel should be disposed as?
  1. A
    Thrown away
  2. B
    General scrap
  3. C
    Hazardous waste in proper container
  4. D
    Reused always
Question 47Single Answer
The try square is used for?
  1. A
    Punching marks
  2. B
    Measuring length
  3. C
    Scribing circles
  4. D
    Checking 90° angles and marking perpendicular lines
Question 48Single Answer
While filing, excessive pressure causes?
  1. A
    No effect
  2. B
    Faster removal
  3. C
    Better finish
  4. D
    Pinning of file teeth
Question 49Single Answer
What is the clearance angle in twist drill?
  1. A
    Rake angle
  2. B
    Point angle
  3. C
    Helix angle
  4. D
    Lip relief angle
Question 50Single Answer
For cutting external threads on mild steel rod, which lubricant is used?
  1. A
    Dry
  2. B
    Water
  3. C
    Cutting oil
  4. D
    Kerosene only
Important Questions Package

MPESB ITI Training Officer Turner Exam Online Question Bank Package

Buy MPESB ITI Training Officer Turner Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in MPESB ITI Training Officer Turner question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.MPESB ITI Training Officer (Turner) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.MPESB ITI Training Officer (Turner) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.MPESB ITI Training Officer (Turner) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.MPESB ITI Training Officer (Turner) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.MPESB ITI Training Officer (Turner) Exam - Hindi
Description : 1000 Question & A0nswer Download in PDF (Send by Email)
₹151 [₹450]
6.MPESB ITI Training Officer (Turner) Exam - English
Description : 1000 Question & A0nswer Download in PDF (Send by Email)
₹151 [₹450]
7.MPESB ITI Training Officer (Turner) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
8.MPESB ITI Training Officer (Turner) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material
₹390 [₹600]
Back to Exam
Question for MPESB ITI Training Officer (Turner) 2026 - Quiz / Questions / MCQ - Toppersexam