On which river the multi-purpose project pulichintala located?

Who became the youngest person to reach the summit of Aconcagua, the highest mountain of America?

At which place, the Union Health and Family Welfare Minister, Gulam Nabi Azad inaugurated the All India Institute of Medical Science (AIIMS) on February 26, 2014?

The Union Government has cleared a proposal for setting up of National Cancer Institute. The proposed institute would be set-up in

'Sangharsh Ke Safar Ka Nayak Mulayam' the book is written by

Knot is a unit of _________ ?

When substances combine to make compounds, the proportions of each substance in the compound .

Optical Fibre technology works on which of these principles of Physics ?

Who among the following is credited for the Corpuscular theory of light ?

Electron microscope works on which of the following principles ?

The atoms and molecules that make up a rock .

A substance that contains only one type of atom is a(n)

a satellite is orbiting close to the surface of earth. In order to make it move to infinity, its velocity must be increased by about
 

A sealed metal container holds a gas. What happens when the container is heated ?

Which of these is an example of matter ?

How are atoms and elements related ?

Suppose you examine an unknown liquid. You determine that it contains a single type of molecule. What is the liquid ?

A small table is orbiting with a constant angular velocity on a circular track. A glass half of water is fixed on the table. The surface of water in the glass is
 

A Cork and a pebble are placed in 100 ml of water, and each displaces 10 ml of water.  The cork floats but the pebble sinks .

In which of the following states can molecules and atoms move ?

Two cylinders A and B fitted with pistons contain equal amounts of an ideal diatomic gas at 300 K. The piston of A is free to move while that of B is held fixed. The same amount of heat is given to the gas in each cylinder. If the rise in temperature of the gas in A is 30 K, then the rise in temperature of the gas in B is
 

An ice cube of volume Vm³ and density 0.9g/cc, is floating in water. What is the minimum vertical downward force (in Newton) needed to be applied to totally immerse the ice cube into water?
 

The function of hydraulic mechanism in a wheel chair is based on
 

In a certain code ‘ke pa lo ti’ means ‘lamp is burning bright’ and ‘lo si ti ba ke’ means ‘bright light is from lamp’Which of the following is the code for ‘burning’ in that language ?

What will come in place of question mark (?) in the alphabetic order given below?
C B A A C B A A B C B A A B C C B A A B ?

How many meaningful English works can be formed with the letters ‘RAE’ using each letter only once in each word ?

The following groups of alphabets form a certain pattern with regard to their position in the English alphabetic series. Based upon the pattern, which of the following five alternative shall replace the question mark?
AD, C, HK, MJ,?

If the letters in the word 'DOLPHIN' are rearranged as they appear in English alphabetical order, which of the following letters will be the fifth from left?

For a slider crank mechanism, the velocity and acceleration of the piston at inner dead centre will be : Where ‘  ώ ‘ is angular velocity of the crank and ‘r’ its radius .

----------------------------------------------
Activity      Duration
----------------------------------------------
1-2                 3
2-3                 2
4-3                 3
1-4                 3
2-5                 2
3-5                 2
4-5                 4
-----------------------------------------------
A project has following activities and durations. Then critical path is

A simple mechanism has :

Oldham’s coupling is inversion of -

CNC machine interpolator controls

In arc welding process heat input per unit length is inversely proportional to

Mohr’s circle may be used to determine following stress on a inclined plane

In a pipe with constant flow rate, if diameter of pipe is halved and length of pipe is doubled, then the head loss due to friction will be increased by what amount of initial value?

Principle mechanism of material removal in ECM?

Which of the following is not the unit of distance ?

At x = 0, the function f (x) = |x| will be

The unit of work is  :

In a pipe with constant flow rate, if diameter of pipe is halved and length of pipe is doubled, then the head loss due to friction will be increased by what amount of initial value?

Ratio of solidification time f a cylindrical casting (height = radius) to the cubic casting of side two times the height of cylindrical casting is __________
 

Closely same meaning to word Awkward

An orthogonal turning operation is carried out under the following conditions: rake angle = 5^o, spindle  rotational speed  = 400rpm, axial feed = 0.4 m/min and radial depth of cut = 5 mm. The chip thickness tc i9s found to be 3 mm. The shear angle (in degree) in this turning process is __________

Packing factor for BCC structure is (numerical type) ____________

In insulated turbine, expansion takes place isentropically from State 1 and 20% of mass bleed at 20 kPa and remaining expanded to State 3, 9 kPa. At  state 1, m = 100 kg/s h1 = 3486 kJ/kg State 2, steam is dry saturated with h2 = 2776 kJ/kg and State 3, P = 9 kPa, hf, hg, sf, sg, then total work output of turbine (in MW) is _________

A venturimeter is attached to pipe of 80 mm diameter has throat of 40 mm diameter. It is found that pressure in the pipe and at throat is 400 kPa and 130 kPa, respectively. Velocity of the flow in the pipe (in m/s) is _________

A column of length 1 m is hinged at both ends has cross-section (10x20)mm2. Young’s modulus of  elasticity is 200GPa. The maximum permissible axial compressive load can apply (in N) is ___________

In a spring mass system, the mass is m and spring constant is k. The critical damping coefficient of the system is 0.1 kg/s. In another spring mass system, the mass is 2m and the spring constant is 8k. The critical damping coefficient of the system (in kg/s) is  __________

Annual demand of a product is 50000 and ordering  cost is Rs. 7000 per order and EOQ is 10000 units. At  optimum annual inventory, total yearly holding cost is _________Rs. 

Which one of the following configurations has thehighest fin effectiveness?

The maximum force F in kN that can be applied at C such that the axial stress in any of the truss member does not exceed 100 MPa is

Specific enthalpy and velocity of steam at inlet and exit of a steam turbine, running under steady state, are as given below. 

Steam Condition	Specific Enthalpy (kJ/kg)	Velocity (m/s)
Intel steam condition	3250	180
Exit steam condition	2360	5

The rate of heat loss from the turbine per kg of steam flow rate is 5 kW. Neglecting changes in potential energy of steam, the power developed in kW by the steam turbine per kg of steam flow rate, is

A circular solid disc of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is              

Water is coming out from a tap and falls vertically downwards. At the tap opening, the steam diameter is 20 mm with uniform velocity of 2 m/s. acceleration due to gravity is 9.81 m/s². Assuming steady, in viscid flow, constant atmospheric pressure everywhere and neglecting curvature and surface tension effects, the diameter in mm o the steam 0.5 m below the tap is approximately

The inverse Laplace transform of the function F(s)  is given by

Water is coming out from a tap and falls vertically downwards. At the tap opening, the steam diameter is 20 mm with uniform velocity of 2 m/s. acceleration due to gravity is 9.81 m/s². Assuming steady, in viscid flow, constant atmospheric pressure everywhere and neglecting curvature and surface tension effects, the diameter in mm o the steam 0.5 m below the tap is approximately

At x = 0, the functions f(x) = x³ + 1 has