📚 Exam by Category
▾
Objective Questions

Latest RRCAT Trade Apprentice Exam Question (Objective Questions), MCQ in English

Subjects : Professional Knowledge, Reasoning, Numerical Ability, General Awareness, English

Question Bank RRCAT Trade Apprentice Exam (Civil Engineering) - English
Back to Exam

Professional Knowledge

Question 1Single Answer
One bag of Portland cement, 50 kg in weight, would normally have a bulk volume of
  1. A
    30 l 
  2. B
    35 l
  3. C
    40 l
  4. D
    45 l
Question 2Single Answer
AsCu, a preservative for wood, developed by the Forest Research Institute, Dehradun, comprises of chemicals:
  1. A
    1 : 1 : 1
  2. B
    1 : 2 : 3
  3. C
    1 : 2 : 4
  4. D
    1 : 3 : 4
Question 3Single Answer
Consider the following statements related to autoclave bricks:
1.Less water absorption compared to other bricks.
2.Noise reduction
3.It is cheap compared to other types of bricks.
4.Requirement of bulk volume of mortar in joints being relatively less compared to other types of brick masonry.
5.Not recommended for outer walls. 
Which of the above statements are relevant to the use of ‘autoclave’ bricks? 
  1. A
    1, 2 and 4
  2. B
    1, 3 and 5
  3. C
    2, 3 and 4
  4. D
    2, 4 and 5
Question 4Single Answer
The minimum number of annular rings to be seen in every 2.54 cm in the radial direction from the core for timber to be classified as ‘Dense’ is
  1. A
    10
  2. B
    20
  3. C
    25
  4. D
    30
Question 5Single Answer
If the actual thickness of a brick masonry wall is 19 cm, its effective length is 2.70 m, its effective height is 2.82 m and its code specified stiffening coefficient is 1.2 then, for design considerations, the slenderness ratio of the wall will be taken as
  1. A
    11.8
  2. B
    12.4
  3. C
    14.2 
  4. D
    14.8
Question 6Single Answer
Consider the following forms of water in a hydrated cement paste:
1.Capillary water
2.Chemically combined water
3.Interlayer water
4.Adsorbed water 
Which of the above forms of water will, on its/their removal, cause shrinkage of the paste? 
  1. A
    1, 2 and 3
  2. B
    1, 2 and 4
  3. C
    2, 3 and 4
  4. D
    1, 3 and 4
Question 7Single Answer
Consider the following statements:High early strength of cement is obtained as a result of
1.Fine grinding.
2.Decreasing the lime content
3.Burning at higher temperature
4.Increasing the quality of gypsum. 
Which of the above statements are correct? 
  1. A
    1 and 2
  2. B
    1 and 3
  3. C
    2 and 3
  4. D
    3 and 4
Question 8Single Answer
Consider the following statements related to ‘composite mortar’:
1.Addition of lime to cement mortar improves its workability
2.Composite mortar is obtained by adding 10% by weight of cement and mixing with water.
3.Composite mortar is not preferred in tall buildings.
4.Mechanical grinding is essential for developing composite mortar.Which of the above statements are true in this case? 
  1. A
    1, 2 and  3 only
  2. B
    1, 3 and  4 only
  3. C
    2, 3 and  4 only
  4. D
    1, 2, 3 and 4
Question 9Single Answer
Consider the following statements related to ‘non-destructive testing’ of concrete:
1.Indentation test is used to assess the quality of concrete.
2.Resonant Frequency Method is based on a laboratory test.
3.Compressive strength of concrete is estimated through Pulse Velocity Measurement.
4.Dynamic modulus of Elasticity is determined by a Sonometer Test.
5.Thickness of concrete can be estimated by in-situ Rebound Hammer Test. 
Which of the above statements are correct? 
  1. A
    1, 2 and 3 only
  2. B
    1, 2 and 5 only
  3. C
    1, 2, 3 and 4 only
  4. D
    1, 2, 3, 4 and 5 
Question 10Single Answer
What is the amount of water required for a workable RC of mix 1 : 2: 4 by weight., when W/C is 0-60 and unit weight of concrete is 2400 kg/m3?
  1. A
    165 l
  2. B
    205 l
  3. C
    245 l
  4. D
    285 l 
Question 11Single Answer
Which IS code is used for classification of timber for seasoning purposes?
  1. A
    IS : 4970-1973
  2. B
    IS : 1708-1969
  3. C
    IS : 1141-1958
  4. D
    IS : 399-1963 
Question 12Single Answer
Consider the following with regard to the application of preservation of timber:
1.Increase in the life span of the member
2.Increase in the strength of the timber
3.Removal of moisture
4.Prevention of growth of fungi by killing them 
Which of the above are correct?
  1. A
    1, 2, 3 and 4
  2. B
    2 and 4 only
  3. C
    1 and 4 only
  4. D
    2 and 3 only
Question 13Single Answer
The plies in plywood are so placed that the grains of each ply are
  1. A
    Parallel to each other
  2. B
    At right angle to one another
  3. C
    45° oblique to adjacent grain
  4. D
    Not constrained by any consideration
Question 14Single Answer
Which of the following is an ODD one as regards ‘requirement of good brick-earth’?
  1. A
    It must be free from lumps of lime
  2. B
    It should not be mixed with salty water
  3. C
    It must be non-homogeneous
  4. D
    It should not contain vegetable and organic matter 
Question 15Single Answer
The compressive strength of heavy-duty bricks, as per IS : 2980-1962, should not be less than
  1. A
    440 kg/cm2
  2. B
    175 kg/cm2
  3. C
    100kg/cm2
  4. D
    75kg/cm2 
Question 16Single Answer
Consider the following statements:
1.Brickwork will have high water tightness.
2.Brickwork is preferred for monument structures.
3.Bricks resist fire better than stones
4.Bricks of good quality shall have thin mortar bonds. 
Which of the above statements are correct?
  1. A
    1 and 2
  2. B
    3 and 4
  3. C
    2 and 3
  4. D
    1 and 4
Question 17Single Answer
Consider the following statements:A good soil for making bricks should contain
1.30% alumina
2.10% lime nodules
3.Only small quantity of iron oxides
4.15% magnesia 
Which of the above statements are correct?
  1. A
    1 and 2 only
  2. B
    1 and 3
  3. C
    1, 2 and 4
  4. D
    2, 3 and 4
Question 18Single Answer
Which compound of cement is responsible for strength of cement?
  1. A
    Magnesium oxide
  2. B
    Silica
  3. C
    Alumina
  4. D
    Calcium sulphate
Question 19Single Answer
Which type of cement is recommended in large mass concrete works such as a dam?
  1. A
    Ordinary Portland
  2. B
    High Alumina
  3. C
    Low-heat Portland
  4. D
    Portland Cement
Question 20Single Answer
Consider the following statements regarding ‘setting of cement’:
1.Low-heat cement sets faster than OPC.
2.Final setting time decides the strength of cement
3.Initial setting time of Portland Pozzollona is 30 minutes
4.Air-induced setting is observed when stored under damp conditions.
4.Addition of gypsum retards the setting time. 
Which of the above statements are correct? 
  1. A
    1, 2 and 3
  2. B
    2, 3 and 4
  3. C
    3, 4 and 5
  4. D
    2, 3 and 5 
Question 21Single Answer
Consider the following statements regarding ‘strength of cement’:
1.Strength test on cement is made on cubes of cement-sand mix.
2.Water to be used for the paste is 0.25 P, where P is the water needed for normal consistency.
3.The normal consistency is determined on Le Chatelier’s principle.
4.Cubes are cast in two layers in leak-proof moulds further compacted in each layer by vibration on a machine. 
Which of the above statements are correct? 
  1. A
    1 and 2
  2. B
    2 and 3
  3. C
    1 and 4
  4. D
    3 and 4 
Question 22Single Answer
Which of the following ingredients refer to binding material of mortar?
1.Cement
2.Lime
3.Sand
4.Ashes 
Select the correct answer using the code given below. 
  1. A
    1 and 4
  2. B
    3 and 4 
  3. C
    1 and 2
  4. D
    2 and 3
Question 23Single Answer
Consider the following statements:
1.Bricks in masonry are bound by mortar.
2.Mortars make brick damp-proof.
3.Strength of brick in masonry is improved by plastering.
4.Addition of lime improves workability.
5.Marine construction needs sulphate-resistant cement mortar. 
Which of the above statements are relevant for ‘cement mortar’? 
  1. A
    1, 2 and 3
  2. B
    2, 3 and 4 
  3. C
    1, 4 and 5
  4. D
    3, 4 and 5 
Question 24Single Answer
Consider the following parameters of concrete:
1.Impermeability
2.Compactness
3.Durability
4.Desired consistency
5.Workability 
Which of the above parameters are relevant for ‘water-cement ratio’? 
  1. A
    4 and 5
  2. B
    1 and 2
  3. C
    2 and 4
  4. D
    3 and 5
Question 25Single Answer
Consider the following statements:Presence of Na2O and K2O in concrete leads to
1.Expansive reaction in concrete
2.Cracking of concrete
3.Disruption of concrete
4.Shrinkage of concrete 
Which of the above statements are correct? 
  1. A
    1 and 2 only
  2. B
    2 and 3 only
  3. C
    1, 2 and 3
  4. D
    3 and 4 
Question 26Single Answer
The maximum total quantity of dry aggregate by mass per 50 kg of cement, to be taken as the sum of the individual masses of fine and coarse aggregates (kg), for M20 grade of concrete is
  1. A
    625
  2. B
    480
  3. C
    330
  4. D
    250
Question 27Single Answer
Absorption capacity of an aggregate refers to the difference expresses in appropriate proportion in water content between
  1. A
    A wet aggregate and a dry aggregate
  2. B
    A dry aggregate and a wet aggregate
  3. C
    A saturated surface-dry aggregate and a dry aggregate
  4. D
    A saturated surface-dry aggregate and an over dry aggregate 
Question 28Single Answer
Consider the following statements concerning  ‘elasticity of concrete’:
1.Stress-strain behavior of concrete is a straight line up to 10% ultimate stress.
2.Strain determination is obtained from tangent modulus.
3.Modulus of elasticity of concrete is also called as secant modulus. 
Which of the above statements are correct? 
  1. A
    1, 2 and 3
  2. B
    1 and 3 only
  3. C
    1 and 2 only
  4. D
    2 and 3 only
Question 29Single Answer
Consider the following statements :The addition of CaCl2 in concrete results in
1.Increased shrinkage
2.Decreased setting time
3.Decreased shrinkage
4.Increased setting time 
Which of the above statements are correct? 
  1. A
    1 only
  2. B
    2 and 3
  3. C
    3 and 4
  4. D
    1 and 2
Question 30Single Answer
Which of the following statements are correct ?
1.Knots in a tree affect the continuity of fibres.
2.Nail knots do not influence the strength of timber.
3.Druxiness of wood is not a defect.
4.Tall trees with twisted fibers give good timber for poles.
  1. A
    1, 2, 3 and 4
  2. B
    1, 2 and 4 only
  3. C
    1, 2 and 3 only
  4. D
    2, 3 and 4 only

Reasoning

Question 31Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
  1. A
    Two
  2. B
    Three
  3. C
    Five
  4. D
    Four
  5. E
    None of these
Question 32Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
  1. A
    True
  2. B
    False
  3. C
    Uncertain
  4. D
    None
Question 33Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
  1. A
    A
  2. B
    E
  3. C
    T
  4. D
    X
  5. E
    Y
Question 34Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
  1. A
    None            
  2. B
    One         
  3. C
    Two       
  4. D
    Three        
  5. E
    More than three
Question 35Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 36Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 37Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
  1. A
    T
  2. B
    L
  3. C
    E
  4. D
    Y
  5. E
    X
Question 38Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 39Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 40Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’  and if no such word can be formed your answer is ‘B’.
  1. A
    V
  2. B
    T
  3. C
    E
  4. D
    A
  5. E
    B

Numerical Ability

Question 41Single Answer
A boat can travel with a speed of 13 km/hr in still water. If the speed of the stream is 4 km/hr, find the time taken by the boat to go 68 km downstream .
  1. A
    2 hours
  2. B
    3 hours
  3. C
    4 hours
  4. D
    5 hours
Question 42Single Answer
Sum of digit of a two-digit number is 15 and the difference between the digits is 3. What is the two digit number ?
  1. A
    69
  2. B
    96
  3. C
    78
  4. D
    Cannot be determined
  5. E
    None of these
Question 43Single Answer
The sum of three consecutive integers is 30. Which of the following is the largest among the three ?
  1. A
    12
  2. B
    13
  3. C
    14
  4. D
    10
  5. E
    None of these
Question 44Single Answer
Which is the largest of the following fractions ?
  1. A
  2. B
  3. C
  4. D
Question 45Single Answer
The sum of 3 consecutive even numbers is 198. Which of the following will be the smallest number among them ?
  1. A
    42
  2. B
    38
  3. C
    32
  4. D
    72
  5. E
    None of these
Question 46Single Answer
Two third of half of a number is 18. What is one third of that number ?
  1. A
    18
  2. B
    16
  3. C
    19
  4. D
    17
  5. E
    None of these
Question 47Single Answer
The difference between th of th of a number and  of th of the same number is 9. What in the number.
  1. A
    45
  2. B
    35
  3. C
    40
  4. D
    30
  5. E
    None of these
Question 48Single Answer
If  is subtracted from and the difference is multiplied by 504, what will be the number ?
  1. A
    2024
  2. B
    2104
  3. C
    2004
  4. D
    2014
  5. E
    None of these
Question 49Single Answer
‘a’ is greater than ‘b’ by 2 and ‘b’ is greater than ‘c’ by 10. If a+b+c = 130 then (b+c) - a = ?
  1. A
    38
  2. B
    42
  3. C
    44
  4. D
    34
  5. E
    None of these
Question 50Single Answer
The product of two successive positive integers is 462. Which is the smaller integer ?
  1. A
    20
  2. B
    22
  3. C
    21
  4. D
    23
  5. E
    None of these
Important Questions Package

RRCAT Trade Apprentice Exam Online Question Bank Package

Buy RRCAT Trade Apprentice Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in RRCAT Trade Apprentice question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.RRCAT Trade Apprentice Exam (Civil Engineering) - English
Description : 2500 Question With Answer
₹271 [₹500]
2.RRCAT Trade Apprentice Exam (Civil Engineering) - Hindi
Description : 2500 Question With Answer
₹271 [₹500]
3.RRCAT Trade Apprentice Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
4.RRCAT Trade Apprentice Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
Back to Exam