πŸ“š Exam by Category
β–Ύ
Question Bank

SECL Dy. Surveyor Exam - English

Duration: 120 Β· Questions: 100 Β· Max Marks: 100 Β· Language: 3

View SECL Dy. Surveyor 2026 Exam Page

General Awareness/Aptitude & Knowledge regarding CIL/SECL

1
Yojna a weekly journal
  1. A.Ministry of Finance        
  2. B.Ministry of Information and Broadcastin
  3. C.Ministry of Rural Development
  4. D.Planning Commission
2
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
  1. A.Two
  2. B.Three
  3. C.Five
  4. D.Four
  5. E.None of these
3
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
  1. A.X
  2. B.W
  3. C.I
  4. D.H
4
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
  1. A.51:52
  2. B.52:53
  3. C.51:53
  4. D.52:55
5
Which of the following numbers is irrational ?
  1. A.√49
  2. B.0.125
  3. C.√2
  4. D.22/7
6
356 x 936 – 356 x 836 = ?
  1. A.35600  
  2. B.34500
  3. C.9630
  4. D.93600
7

"Who said, 'India was a parrot unto itself'?

  1. A.Malik Muhammad Joyce
  2. B.Raskhan
  3. C.Rich Khusrow
  4. D.Rich Hasan
8
Which is the national game of Bhutan ?
  1. A.badminton
  2. B.basketball
  3. C.football
  4. D.archery
9
When was the Constituent Assembly of India formed?
  1. A.1946
  2. B.1947
  3. C.1948
  4. D.1950
10
Ventilation in mines is necessary to?
  1. A.Roof support only
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Dilute firedamp and remove noxious gases
11
Main purpose of booster fans is?
  1. A.Roof support only
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Maintain airflow in obstructed or long airways
12
Air regulators help to?
  1. A.Balance pressure and airflow in mines
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Roof support only
13
Air doors are used to?
  1. A.Dust suppression only
  2. B.Coal transport only
  3. C.Direct airflow to working faces
  4. D.Roof support only
14
Anemometer is used to measure?
  1. A.Coal transport only
  2. B.Air velocity
  3. C.Dust suppression only
  4. D.Roof support only
15
Hygrometer measures?
  1. A.Dust suppression only
  2. B.Coal transport only
  3. C.Moisture in air
  4. D.Roof support only
16
Flame safety lamps indicate?
  1. A.Roof support only
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Presence of methane and flammable gases
17
Electric safety lamps are preferred because?
  1. A.Roof support only
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Safe in explosive atmosphere and provide illumination
18
Coal dust explosion can be prevented by?
  1. A.Coal transport only
  2. B.Stone dusting, ventilation, and water sprays
  3. C.Dust suppression only
  4. D.Roof support only
19
Stone dust in mines should be?
  1. A.Roof support only
  2. B.Coal transport only
  3. C.Dust suppression only
  4. D.Non-combustible and inert
20
What astronomical discovery was announced by astronomers in March 2026?
  1. A.New planet in solar system
  2. B.Discovery related to 1,900 light-years away (specific object)
  3. C.Black hole merger
  4. D.Exoplanet with life signs

Surveyor

1
What is the primary objective of surveying?
  1. A.To measure wind speed
  2. B.To analyze soil composition
  3. C.To determine relative positions of points on the earth’s surface
  4. D.To calculate building heights
2
Which type of surveying assumes the earth’s surface as a plane?
  1. A.Geodetic surveying
  2. B.Plane surveying
  3. C.Topographic surveying
  4. D.Hydrographic surveying
3
What is the first principle of surveying?
  1. A.Part to whole
  2. B.Whole to part
  3. C.Direct measurement
  4. D.Indirect measurement
4
Which instrument is used to measure horizontal and vertical angles in surveying?
  1. A.Chain
  2. B.Theodolite
  3. C.Leveling rod
  4. D.Compass
5
In chain surveying, what is the purpose of a tie line?
  1. A.To mark boundaries
  2. B.To measure vertical distances
  3. C.To connect two main survey lines
  4. D.To align the chain
6
The most accurate method for direct linear measurement in surveying is
  1. A.Pacing
  2. B.Passometer
  3. C.Chaining
  4. D.EDM
7
In chain surveying, measurements made are primarily
  1. A.Linear only
  2. B.Angular only
  3. C.Both linear and angular
  4. D.Vertical only
8
The process of establishing points along a straight chain line is known as
  1. A.Ranging
  2. B.Chaining
  3. C.Offsetting
  4. D.Levelling
9
When line of sight is obstructed by an obstacle in chaining, the method used is
  1. A.Direct ranging
  2. B.Compass ranging
  3. C.Optical ranging
  4. D.Reciprocal ranging
10
EDM stands for
  1. A.Electronic Distance Measurement
  2. B.Exact Distance Method
  3. C.Electromagnetic Distance Meter
  4. D.Enhanced Distance Measurement
11
Which type of EDM generally provides the longest measurement range?
  1. A.Infrared EDM
  2. B.Laser EDM
  3. C.Visible light EDM
  4. D.Microwave EDM
12
A transit theodolite is mainly used for measuring
  1. A.Horizontal angles only
  2. B.Both horizontal and vertical angles
  3. C.Vertical angles only
  4. D.Distances only
13
Digital theodolites have an advantage over traditional transit theodolites due to
  1. A.Lower weight
  2. B.Digital readout and higher precision
  3. C.Manual vernier reading
  4. D.Lower cost
14
The horizontal angle measured clockwise from north is called
  1. A.Bearing
  2. B.Latitude
  3. C.Azimuth
  4. D.Departure
15
In rectangular coordinate system of surveying, latitude of a line is
  1. A.East-west component
  2. B.North-south component
  3. C.Vertical component
  4. D.Slope component
16
Departure of a line in traverse calculation is
  1. A.East-west projection
  2. B.North-south projection
  3. C.Vertical rise
  4. D.Angular deviation
17
For a line of length 200 m and bearing N 45Β° E, the latitude is
  1. A.200 m
  2. B.100 m
  3. C.5.42 m
  4. D.0 m
18
For the same line in Q12, the departure is
  1. A.200 m
  2. B.100 m
  3. C.5.42 m
  4. D.0 m
19
In a closed traverse, the algebraic sum of latitudes should be
  1. A.Positive
  2. B.Negative
  3. C.Zero
  4. D.Equal to perimeter
20
The coordinate method for area of traverse uses
  1. A.Only latitudes
  2. B.Only departures
  3. C.Latitudes and departures
  4. D.Bearings only
21
Simpson's Rule for area assumes the curve between points is
  1. A.Straight line
  2. B.Hyperbolic
  3. C.Circular
  4. D.Parabolic
22
Trapezoidal Rule approximates the boundary as
  1. A.Parabolic arcs
  2. B.Circular arcs
  3. C.Straight lines
  4. D.Random curves
23
Simpson's Rule requires the number of ordinates to be
  1. A.Even
  2. B.Any number
  3. C.Odd
  4. D.Prime
24
Trapezoidal Rule requires the number of intervals to be
  1. A.Odd only
  2. B.Even only
  3. C.Any number
  4. D.At least 3
25
For volume calculation using average end area method, the formula is
  1. A.(A1 + A2)/2 x L
  2. B.(A1 x A2)/3 x L
  3. C.A1 + A2 x L
  4. D.(A1 - A2) x L
26
In trigonometric levelling, height difference h =
  1. A.D x tan B
  2. B.D x cos B
  3. C.D x sin B
  4. D.D / tan B
27
When the base of an object is inaccessible, trigonometric levelling uses
  1. A.Two vertical angles from different points
  2. B.Single vertical angle
  3. C.Horizontal angles only
  4. D.Compass bearings
28
Spherical trigonometry is mainly used in
  1. A.Plane surveying
  2. B.Chain surveying
  3. C.Levelling
  4. D.Geodetic surveying over large areas
29
The error in chaining due to incorrect ranging is
  1. A.Compensating
  2. B.Cumulative
  3. C.Random
  4. D.Negligible
30
The phase comparison method is commonly used in
  1. A.Pulse EDM
  2. B.Modern EDM instruments
  3. C.Chain surveying
  4. D.Levelling
31
Typical least count of a vernier theodolite is
  1. A.1Β°
  2. B.1'
  3. C.5"
  4. D.20"
32
In reciprocal ranging, two ranging rods are placed
  1. A.At the same point
  2. B.Perpendicular to line
  3. C.On opposite sides of obstacle
  4. D.At 90Β° to each other
33
Metric chain commonly used in India is of length
  1. A.30 m
  2. B.20 m
  3. C.66 ft
  4. D.100 ft
34
Simpson's Rule formula for area with common interval h is
  1. A.h/2 (first + last + 2βˆ‘ intermediates)
  2. B.h (sum of all ordinates)
  3. C.h/3 (first + last + 4βˆ‘ odds + 2βˆ‘ evens)
  4. D.h/2 x sum
35
Trapezoidal Rule formula for area is
  1. A.h/3 (first + last + 4βˆ‘ odds + 2βˆ‘ evens)
  2. B.h/2 (first + last + 2βˆ‘ intermediates)
  3. C.h x average ordinate
  4. D.h x max ordinate
36
In traverse, independent coordinates are calculated from
  1. A.Sum of latitudes and departures
  2. B.Lengths only
  3. C.Bearings only
  4. D.Total latitude and departure from origin
37
For trigonometric levelling when instrument and staff are at same level, correction is
  1. A.Negative
  2. B.Positive
  3. C.Zero
  4. D.Curvature only
38
The spherical excess in spherical triangle is
  1. A.Zero
  2. B.Sum of angles - 360Β°
  3. C.Sum of angles - 540Β°
  4. D.Sum of angles - 180Β°
39
EDM accuracy is affected by
  1. A.Atmospheric conditions
  2. B.Chain length
  3. C.Theodolite reading
  4. D.Compass declination
40
In theodolite, face left and face right readings are taken to eliminate
  1. A.Collimation error
  2. B.All of the above
  3. C.Graduation error
  4. D.Index error
41
The area by coordinate method is half the absolute value of
  1. A.βˆ‘ latitudes x departures
  2. B.βˆ‘ (x_i y_{i+1} - x_{i+1} y_i)
  3. C.Sum of bearings
  4. D.Perimeter
42
Simpson's Rule is more accurate than Trapezoidal Rule when the curve is
  1. A.Straight
  2. B.Smoothly curved
  3. C.Irregular
  4. D.Angular
43
In volume calculation, prismoidal correction is applied when using
  1. A.Trapezoidal rule
  2. B.Coordinate method
  3. C.Average end area
  4. D.Simpson's rule for volumes
44
For inaccessible height, if vertical angles are B1 and B2 from two points distance D apart, height ~
  1. A.D / (tan B1 - tan B2)
  2. B.D x (tan B1 + tan B2)
  3. C.D x tan B1
  4. D.D / tan B1
45
Basic assumption in plane surveying is
  1. A.Earth is flat
  2. B.Earth is sphere
  3. C.Earth is ellipsoid
  4. D.No curvature
46
Gunter's chain is
  1. A.100 ft long
  2. B.30 m long
  3. C.20 m long
  4. D.66 ft long
47
In chaining, sag correction is applied for
  1. A.Catenary effect in tape
  2. B.Slope
  3. C.Temperature
  4. D.Pull
48
The least count of digital theodolite is usually
  1. A.20"
  2. B.1" or 5"
  3. C.1'
  4. D.1Β°
49
Latitude = length x
  1. A.sin bearing
  2. B.cos bearing
  3. C.tan bearing
  4. D.sec bearing
50
Departure = length x
  1. A.cos bearing
  2. B.cot bearing
  3. C.tan bearing
  4. D.sin bearing
51
If bearing is S 60Β° E, latitude is
  1. A.Positive
  2. B.Zero
  3. C.Negative
  4. D.East
52
Area by Trapezoidal Rule overestimates if the curve is
  1. A.Concave up
  2. B.Concave down
  3. C.Straight
  4. D.Parabolic
53
Simpson's Rule gives exact result for
  1. A.Linear boundary
  2. B.Any curve
  3. C.Circular boundary
  4. D.Parabolic boundary
54
In trigonometric levelling, refraction correction is approximately
  1. A.1/7 curvature
  2. B.1/14 curvature
  3. C.Equal to curvature
  4. D.Zero
55
Curvature correction in levelling is proportional to
  1. A.Angle
  2. B.Distance
  3. C.Height
  4. D.Distance squared
56
The most precise linear measurement method among following is
  1. A.Chaining
  2. B.Taping
  3. C.EDM
  4. D.Pacing
57
Direct ranging is possible when
  1. A.Hill intervenes
  2. B.Obstacle present
  3. C.Line of sight is clear
  4. D.River crosses
58
In EDM, PPM correction is for
  1. A.Instrument constant
  2. B.Atmospheric conditions
  3. C.Zero error
  4. D.Scale factor
59
Theodolite is used in
  1. A.Traverse surveying
  2. B.Compass surveying
  3. C.Chain surveying
  4. D.Plane table surveying
60
In closed traverse, linear misclosure is checked by
  1. A.Closing error
  2. B.Sum of interior angles
  3. C.Sum of latitudes and departures
  4. D.All
61
Simpson's Rule is not applicable if number of intervals is
  1. A.Odd
  2. B.Zero
  3. C.Even
  4. D.One
62
For volume of earthwork, best method for irregular sections is
  1. A.Trapezoidal
  2. B.Average end area
  3. C.Prismoidal (Simpson's)
  4. D.Coordinate
63
In trig levelling, if vertical angle is zenith angle, height uses
  1. A.sin zenith
  2. B.cos zenith
  3. C.tan zenith
  4. D.cot zenith
64
Spherical triangle sum of angles is always
  1. A.180Β°
  2. B.360Β°
  3. C.Less than 180Β°
  4. D.More than 180Β°
65
The error due to wrong length of chain is
  1. A.Compensating
  2. B.Random
  3. C.Cumulative
  4. D.Instrumental
66
Digital theodolite measures angles using
  1. A.Encoder
  2. B.Optical micrometer
  3. C.Vernier
  4. D.Compass
67
Latitude and departure method is also called
  1. A.Coordinate method
  2. B.Transit rule
  3. C.Bowditch rule
  4. D.Independent coordinate
68
Trapezoidal Rule is also known as
  1. A.Average ordinate rule
  2. B.Mid ordinate rule
  3. C.End area method
  4. D.Prismoidal
69
In Simpson's Rule, weight for first and last ordinate is
  1. A.2
  2. B.1
  3. C.4
  4. D.3
70
For inaccessible base, if angles are equal, height is
  1. A.Infinite
  2. B.D / 2 tan B
  3. C.Zero
  4. D.Special case
71
EDM uses which wave for measurement?
  1. A.Sound
  2. B.Electromagnetic
  3. C.Light only
  4. D.Laser only
72
The principle of theodolite is based on
  1. A.Level tube
  2. B.Telescope and circles
  3. C.Chain
  4. D.Tape
73
In traverse, if latitude sum β‰  0, error is in
  1. A.Angle
  2. B.Bearing
  3. C.Length
  4. D.Closure
74
Simpson's Rule is accurate for up to
  1. A.2nd degree
  2. B.1st degree
  3. C.3rd degree curve
  4. D.4th degree
75
Volume by prismoidal formula = L/6 (A1 + A2 + 4 Am) where Am is
  1. A.Max
  2. B.End area
  3. C.Average
  4. D.Mid section area
76
Refraction in trig levelling makes apparent height
  1. A.Same
  2. B.Lower
  3. C.Higher
  4. D.Zero
77
In geodetic survey, spherical trigonometry uses
  1. A.Plane angles
  2. B.Small circles
  3. C.Great circles
  4. D.Spherical angles
78
Chaining on sloping ground requires
  1. A.Horizontal equivalent
  2. B.Slope correction
  3. C.Both
  4. D.None
79
Ranging rod length is usually
  1. A.1 m
  2. B.2 m
  3. C.3 m
  4. D.4 m
80
In EDM, modulation frequency affects
  1. A.Both
  2. B.Accuracy
  3. C.Range
  4. D.None