If a submerged body displaced from its equilibrium position, returns to its original position, it is called __________.
A
thermal equilibrium
B
neutral equilibrium
C
unstable equilibrium
D
stable equilibrium
Question 2Single Answer
In a flow measurement, a venturi meter is preferred over an orifice plate because _____.
A
energy of head loss is less
B
It is cheaper
C
pressure drop is more
D
space is limited
Question 3Single Answer
Pitot tube measures ______.
A
dynamic pressure of a moving stream
B
guage pressure
C
temperature of moving water
D
pressure difference between two fluids
Question 4Single Answer
Which of the following is not a property of an ideal fluid ?
A
flow is irrotational
B
it has no viscosity
C
it has viscosity
D
it is incompressible
Question 5Single Answer
Nozzle used in steam turbines convert ________.
A
enthalpy of steam into work
B
enthalpy of steam into kinetic energy
C
enthalpy of steam into pressure energy
D
pressure energy into work
Question 6Single Answer
Which of the following assumptions is the most relevant in air-standard cycle analysis ?
A
All the processes within the cycle are irreversible
B
Working fluid is a fixed mass
C
Specific heat of air changes during the cycle
D
Cycle is assumed to be an open cycle
Question 7Single Answer
The modern Francis turbine is a ___________flow turbine .
A
tangential
B
axial
C
radial
D
mixed
Question 8Single Answer
Variation of stress with strain rate for a Newtonian fluid is ______ .
A
hyperbolic
B
linear
C
elliptical
D
parabolic
Question 9Single Answer
Which of the following is NOT a part of refrigeration systems ?
A
Turbine
B
Evaporator
C
Compressor
D
Condenser
Question 10Single Answer
Which of the following is NOT an intensive property ?
A
Temperature
B
Total volume
C
Pressure
D
Density
Question 11Single Answer
Which of the following does NOT represent a unit of viscosity ?
A
Stoke
B
Poise
C
m²/sec
D
N-m/sec
Question 12Single Answer
__________ in the fuel is oxidised during knocking .
A
Hydrocarbon
B
Phosphorous
C
Water
D
Coal
Question 13Single Answer
_________ is defined as the ability of a material to resist deformation under action of an external load .
A
Stiffness
B
Resilience
C
Brittleness
D
Toughness
Question 14Single Answer
Draught is produced in locomotive boilers by which of the following components ?
A
Locomotive
B
Steam jet
C
Centrifugal fan
D
Chimney
Question 15Single Answer
For a steady flow, the value of all fluid properties at any fixed point _________ .
A
do not change with location
B
change with time
C
change with location
D
do not change with time
Question 16Single Answer
For a floating body, if the metacentre is below the centre of gravity, then the body is said to be __________ equilibrium .
A
thermal
B
stable
C
unstable
D
neutral
Question 17Single Answer
________ is useful for measuring flow of a conducting fluid .
A
Orifice meter
B
Rotameter
C
Vane meter
D
Electro-magnetic flow meter
Question 18Single Answer
A two- stroke engine consists of ________ port (s)
A
Three
B
Four
C
One
D
Two
Question 19Single Answer
Air Cooling is mostly preferred for _________ .
A
heavy truck
B
buses
C
moto cycles
D
multi-utility vehicles
Question 20Single Answer
_______ valves are provided in reciprocating compressors .
A
Simply supported
B
Solenoid
C
Plate
D
Poppet
Question 21Single Answer
Benson boiler have ______ water drum (s)
A
One
B
Zero
C
Three
D
Two
Question 22Single Answer
_________ is used for pumping water into a boilers .
A
Economiser
B
Duplex pump
C
Feed pump
D
Rotor
Question 23Single Answer
The function of a carburetor in internal combustion engines is :
A
to control fuel alone
B
to cool exhaust gases
C
to maintain air-fuel ratio
D
to control air alone
Question 24Single Answer
The device which transfers energy from the ______ to _____ the is known as hydraulic turbine .
A
atmosphere; fluid
B
rotor; fluid
C
fluid; rotor
D
fluid; atmosphere
Question 25Single Answer
The flash chamber in the single stage VCR cycle serves to ________ .
A
decrease the compression ratio
B
increase the refrigerating effect
C
increase the compression ratio
D
decrease the refrigerating effect
Question 26Single Answer
Define thermodynamics .
A
It is a science which deals with the relation between heat, work and properties of systems
B
It is a science which deals with work done
C
It deals with dynamics under thermal conditions
D
It is science which deals with the relation between work and properties
Question 27Single Answer
Which of the following statements is correct about a Benson boiler ?
A
Air is sent through the same direction
B
There is no recirculation of water
C
Steam is sent out in multiple directions
D
Flue gases pass only in one direction
Question 28Single Answer
Within a refrigeration system, the expansion valve is incorporated between the ________ .
A
Super-heater and sub-cooler
B
compressor and condenser
C
evaporator and compressor
D
condenser and evaporator
Question 29Single Answer
The reversed ______ cycle employed for passenger aircraft systems .
A
Carnot
B
Atkinson
C
Ericsson
D
Brayton
Question 30Single Answer
Fusible plug in a steam boiler is placed ______ .
A
below the water level indicator
B
at he crown of the furnace
C
at the fire grate of the boiler
D
near the manhole
Question 31Single Answer
Aqua ammonia solution used in a vapour absorption refrigeration system is a solution of ammonia in ________ .
A
CF3
B
LiBr
C
H2O2
D
H2O
Question 32Single Answer
Coated electrodes are used in ______ .
A
gas tungsten arc welding
B
submerged arc welding
C
tungsten insert gas welding
D
shielded metal arc welding
Question 33Single Answer
Where is air cycle refrigeration commonly used ?
A
Domestic refrigerator
B
Cold storage
C
Aircraft conditioning
D
Car air conditioning
Question 34Single Answer
________, is not a water tube boiler .
A
Benson boiler
B
Babcock-Wilcox boiler
C
Stirling boiler
D
Scotch marine
Question 35Single Answer
Stoke is another unit of -
A
kinematic viscosityy
B
velocity gradient
C
Shear stress
D
dynamic viscosit
Question 36Single Answer
For a refrigerating machine, capacity is expressed as ______ .
A
the lowest temperature attained
B
inside volume of the cabinet
C
gross weight of the machine
D
rate of heat extraction from the space being cooled
Question 37Single Answer
The value of quality or dryness fraction of a substance in saturated liquid-vapor mixture is ________ .
A
1
B
2
C
Zero
D
between Zero and 1
Question 38Single Answer
Uniform flow is the type of flow where in velocity at any given time ________- with respect to space .
A
Decreases
B
Does not change
C
Increases
D
Changes
Question 39Single Answer
______ falls under the category of a water tube boiler .
A
Locomotive boiler
B
Lancashire boiler
C
Cornish boiler
D
LaMont boiler
Question 40Single Answer
Chaplets are used in ________ .
A
forging
B
casting
C
welding
D
extrusion
Question 41Single Answer
Which of the following is NOT a unit of pressure ?
A
Pa
B
Bar
C
N/m²
D
Joule
Question 42Single Answer
What was the first refrigerant used in continuous refrigeration system ?
A
Ammonia
B
Water
C
Air
D
Carbon dioxide
Question 43Single Answer
For a 2 m deep swimming pool, pressure difference between the top and the bottom of the pool is ________ kPa .
A
22
B
19.6
C
11
D
12
Question 44Single Answer
Pressure measurement is done by ____. by measuring heat loss from a heated wire .
A
A pirani gauge
B
a manometer
C
a barometer
D
an orifice meter
Question 45Single Answer
In the Rankine cycle, the fluid which enters the boiler is :
A
water
B
steam
C
mercury
D
oxygen
Question 46Single Answer
Percentage elongating measured during tensile testing indicates _____ .
A
malleability
B
fatigue strength
C
creep
D
ductility
Question 47Single Answer
For a given centrifugal pump, discharge varies _______ with speed .
A
fifth power of
B
linearly
C
inversely
D
square root of
Question 48Single Answer
Foaming is a phenomenon that occurs in the boiler feed water due to _____ .
A
nitrogen peroxide
B
manganese
C
sodium chloride
D
oil
Question 49Single Answer
Compounding of a steam turbine is done to ______ .
A
balance the rotor
B
reduce the rotor speed
C
reduce the blade friction
D
connect the shaft
Question 50Single Answer
Any change in entropy could be achieved by changing______ .
A
velocity
B
heat
C
acceleration
D
mass
Important Questions Package
SJVN Executive Trainee Exam Online Question Bank Package
Buy SJVN Executive Trainee Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in SJVN Executive Trainee question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
SJVN Executive Trainee Civil Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
2.
SJVN Executive Trainee Civil Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
3.
SJVN Executive Trainee Civil Exam - Hindi
Description : 3500 Question with Answer.
₹181[₹500]
4.
SJVN Executive Trainee Civil Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
5.
SJVN Executive Trainee Civil Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
6.
SJVN Executive Trainee Civil Exam - English
Description : 4000 Question with Answer.
₹201[₹500]
7.
SJVN Executive Trainee Mechanical Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
8.
SJVN Executive Trainee Mechanical Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
9.
SJVN Executive Trainee Mechanical Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
10.
SJVN Executive Trainee Mechanical Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
11.
SJVN Executive Trainee Electrical Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
12.
SJVN Executive Trainee Electrical Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
13.
SJVN Executive Trainee Electrical Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
14.
SJVN Executive Trainee Electrical Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
15.
SJVN Executive Trainee Civil Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
16.
SJVN Executive Trainee Mechanical Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
17.
SJVN Executive Trainee Electrical Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
18.
SJVN Executive Trainee Civil Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
19.
SJVN Executive Trainee Mechanical Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
20.
SJVN Executive Trainee Electrical Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
21.
SJVN Executive Trainee Civil Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
22.
SJVN Executive Trainee Mechanical Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
23.
SJVN Executive Trainee Electrical Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
24.
SJVN Executive Trainee Civil Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
25.
SJVN Executive Trainee Mechanical Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
26.
SJVN Executive Trainee Electrical Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
Mechanical
Question 51Single Answer
Smoke emitting from a lighted cigarette represents ________ .
A
point
B
pathline
C
streakline
D
streamline
Question 52Single Answer
The splash system is NOT used to lubricate _______ .
A
tappets
B
camshafts
C
gear teeth and roller bearings
D
piston rings
Question 53Single Answer
A dead weight tester is used widely for ______ .
A
producing high pressures
B
accurate measurement of loads
C
calibration of another equipment
D
testing magnitude of the given weight
Question 54Single Answer
_______ CANNOT be classified as inversion (s) of a single-slider crank mechanism .
A
Elliptical trammel
B
Whitworth quick-return mechanism
C
Oscillating cylinder engine
D
Crank and slotted-lever mechanism
Question 55Single Answer
Which of the following is NOT a part of Rankine cycle ?
A
Pump
B
Compressor
C
Boiler
D
Turbine
Question 56Single Answer
A power plant that uses a gas turbine followed by a steam turbine for necessary power generation is known as __________ cycle power plant .
A
combined
B
bottom
C
generation
D
topping
Question 57Single Answer
In the context of properties of steel, which of the following statement is highly relevant ?
A
Presence of carbon contents imparts strength to iron
B
Presence of carbon does not influence the heat-treatment process
C
Presence of manganese decreases strength.
D
Presence of sulphide improves corrosion resistance
Question 58Single Answer
Those pumps employed for mud related work have ______ type of impeller .
A
an open
B
a two-side shrouded
C
a double-suction
D
a one-side shrouded
Question 59Single Answer
If the oil viscosity increased, then the wear loss _________ .
A
increases
B
becomes zero
C
decreases
D
remains the same
Question 60Single Answer
Impact load is an example of :
A
uniform load
B
static load
C
dynamic load
D
fatigue load
Question 61Single Answer
Internal energy associated with kinetic energy of molecules is ______ .
A
latent energy
B
nuclear energy
C
sensible energy
D
chemical energy
Question 62Single Answer
A capillary tube is employed in a refrigeration cycle to _______ .
A
produce a cooling effect
B
control temperature of the refrigerated space
C
reduce pressure of the refrigerant
D
control flow of the refrigerant
Question 63Single Answer
The Babcock-Wilcox boiler is classified as a water tube boiler because :
A
it has a large reservoir of water at the bottom
B
water passes around the tubes having hot gases
C
water heater is mounted on the boiler itself
D
water passes through the tube and hot gases around
Question 64Single Answer
Otto cycle of a car engine consists of :
A
two isochore and two reversible adiabatic cycles
B
four adiabatic cycles
C
one isochore cycle only
D
one adiabatic cycle only
Question 65Single Answer
When hot air exhausting from the turbine is used to heat up the compressor exit flow, it is knows as _______ .
A
regeneration
B
re-evaporating
C
intercooling
D
intracooling
Question 66Single Answer
If the specific gravity of oil is 0.7, then its density in kg/m³ will be _______ .
A
700
B
7
C
70
D
7000
Question 67Single Answer
viscous forces are NOT available in _______ .
A
laminar flow
B
irrational flow
C
rotational flow
D
transitional flow
Question 68Single Answer
Which of the following is the most widely used fuel in boilers ?
A
Pulverised coal
B
Wood
C
Oil
D
Anthracite coal
Question 69Single Answer
If the relationship between shear stress of a fluid is NOT linear to the velocity gradient, then the fluid is :
A
a compressible fluid
B
a Newtonian fluid
C
a non-Newtonian fluid
D
an ideal fluid
Question 70Single Answer
In a Pelton wheel, jet ratio values are ________ .
A
More than 6
B
between 2 and 5
C
less than 1
D
less than or equal to 2
Question 71Single Answer
What is kinematic viscosity ?
A
It is the rate of change of shear stress
B
It is the ratio of dynamic viscosity to relative density
C
It is the ratio of dynamic viscosity to mass density
D
It is the rate of change of shear strain
Question 72Single Answer
The efficiency of an ideal diesel engine does NO directly depend on ______ .
A
the cut-off ratio
B
the compression ratio
C
the fluid pressure
D
the isentropic index
Question 73Single Answer
Which of the following equipment gives direct reading of fluid flow rates ?
A
Nutating disk flow meter
B
Hot wire anemometer
C
Rotameter
D
Orifice meter
Question 74Single Answer
The tendency of material to fracture without appreciable deformation is called ______ .
A
stiffness
B
plasticity
C
toughness
D
brittlensess
Question 75Single Answer
Lancashire boiler has ______ flue tube(s), whereas Cornish boiler has _____ flue tube (s) .
A
3 ; 2
B
2; 2
C
2; 1
D
1; 2
Question 76Single Answer
The maximum temperature in case of internal combustion engines is obtained at ______ .
A
end of the compression process
B
end of the expansion process
C
start of the compression process
D
start of the expansion process
Question 77Single Answer
The moisture content o steam at the turbine exit of a steam power plant operating on the Rankine cycle can be decreased by :
A
increasing boiler pressure
B
super cooling steam
C
decreasing boiler pressure
D
reheating steam
Question 78Single Answer
Which of the following is NOT a non-ferrous alloy ?
A
Stainless steel
B
Magnesium
C
Titanium
D
Aluminium
Question 79Single Answer
The flow is volute casing outside the rotating impeller of a centrifugal pump is :
A
forced vortex flow
B
radial flow
C
free vortex flow
D
axial flow
Question 80Single Answer
The compression ratio in ideal air standard cycles is the ratio of :
A
minimum pressure to maximum pressure
B
minimum volume to maximum volume
C
maximum pressure to minimum pressure
D
maximum volume to minimum volume
Question 81Single Answer
Two stroke engine consist of a combined process of _____ in a single stroke .
A
compression and expansion
B
suction and compression
C
suction and expansion
D
suction and exhaust
Question 82Single Answer
The density of fluid does NOT affect the working of ______ .
A
an electro-magnetic flow meter
B
a nozzle meter
C
a rotameter
D
an orifice meter
Question 83Single Answer
Which of the following processes is NOT part of an ideal Otto cycle ?
A
Isentropic expansion
B
Heat addition at constant volume
C
Isentropic compression
D
Heat addition at constant pressure
Question 84Single Answer
In which of the following types of compressors are the motor and compressor enclosed in the same housing ?
A
Open-type compressor
B
Hermetic compressor
C
Reciprocating compressor
D
Axial flow type compressor
Question 85Single Answer
An oil of specific gravity 0.7 is stored in a closed tank up to a height of 2m. What will be the gauge pressure at the bottom of the tank ?
A
0.14 MPa
B
1.4 MPa
C
0.014 MPa
D
14 MPa
Question 86Single Answer
If there is no change in pressure at any point of the system with time, then the system is said to be in :
A
chemical equilibrium
B
mechanical equilibrium
C
Phase equilibrium
D
thermal equilibrium
Question 87Single Answer
If Valve of dryness fraction is 0, it indicates that working fluid is at ______ .
A
Compressed liquid
B
Saturated liquid
C
saturated vapour
D
supreheated vapour
Question 88Single Answer
In the context of roto-dynamic machines, which of the following statements is correct ?
A
There will be a relative motion between the rotor vanes and the fluid
B
Linear momentum is the normal to the stator
C
Linear momentum is the direction normal to the rotor
D
While flowing through the stator. linear momentum changes
Question 89Single Answer
When two elements of a pair are connected such that they can only turn about a fixed axis of another element, they are called _______ .
A
a turning pair
B
a screw pair
C
a spherical pair
D
a sliding pair
Question 90Single Answer
In high-speed aircrafts flying at high altitudes, why is cooling of the cabin required even temperature outside is very low ?
A
Since outside pressure is very high
B
Due to absence of solar radiation
C
To improve fuel efficiency
D
Due to large internal heat generation
Question 91Single Answer
Fusible plug is generally made up of an alloy (gunmetal) which consists of copper, tin and _______ .
A
cast iron
B
zinc
C
aluminium
D
manganese
Question 92Single Answer
In the context of laminar flow, which of the following statement sis the most appropriate ?
A
Laminar flow is observed in high viscous fluids at low velocity
B
There will be an exchange of momentum from fluid particles of one layer of another layer
C
Flow is always through small tanks
D
Particles move in turbulent order
Question 93Single Answer
Which of the following statements is more relevant in the context ?
A
If center of gravity is below the centre of buoyancy, the body is unstable
B
Metacentric height is positive in case of unstable equilibrium
C
The centre of buoyancy in a submerged boy remains
D
When the body is fully submerged, shape of he displaced fluid alters when the body is tilted
Question 94Single Answer
Determinate the COP (coefficient of performance) of a heat pump if the rate of heat rejected is 360 kJ/min and power supplied is 2 kW .
A
4
B
2
C
3
D
1
Question 95Single Answer
Define free-body diagram
A
A figure that represent external forces acting on a body
B
A diagram that represents internal forces acting on a body
C
A free-hand sketch representing a body
D
A diagram that only represents moments acting on a body
Question 96Single Answer
A ball and socket joint is an example of a ________pair .
A
turning
B
screw
C
rolling
D
spherical
Question 97Single Answer
From among the given options, Poisson's ration is the highest for :
A
iron
B
wood
C
copper
D
rubber
Question 98Single Answer
What is ductility in steel ?
A
Ratio of ultimate stress to yield stress
B
Stress at yield stress
C
Amount of strain a material can withstand before fracture
D
Ratio of change in length to original length
Question 99Single Answer
If the gauge pressure of air in a cylinder is 250 kPa, then it's absolute pressure will be _______ .
A
50 kPa
B
150 kPa
C
350 kPa
D
450 kPa
Question 100Single Answer
Flow velocity at the throat of a converging-diverging nozzle is ______, when designed for maximum discharge .
A
Supersonic
B
Sonic
C
Sub-sonic
D
Hypersonic
Question 101Single Answer
What happens when a fluid is at rest ?
A
There is no shear component
B
Internal deformation is considerable
C
Fluid element will not be subjected to normal and shear component
D
Frictional force is present
Question 102Single Answer
What is the unit of surface tension ?
A
kg/m
B
N/m
C
N-m
D
N
Question 103Single Answer
Which of the following does NOT result in poor performance of boilers ?
A
Surface fouling
B
Poor combustion
C
Boiler mounting
D
Poor water quality
Question 104Single Answer
In the context of fluid mechanics, which of the following statements is INCORRECT ?
A
Fluid continues in motion under the application of shear stress
B
Fluid does not deform continuously under shear stress
C
Fluid cannot sustain any shear stress when at rest
D
Fluid deforms under very small shear stress
Question 105Single Answer
A centrifugal pump :
A
flow is radially outwards in this pump
B
fluid gain is through constant head
C
flow is tangential in this pump
D
works on the same principle as that of a Francis turbine
Question 106Single Answer
A fusible plug must be used primarily for safety purposes in which of the following types of boilers ?
A
Oil-fired boiler
B
High – pressure boiler
C
Fire-tube boiler
D
Marine type boiler
Question 107Single Answer
The Rankine cycle is an ideal cycle for vapour power plants because :
A
it does not allow isentropic expansion
B
steam is not condensed in the condenser
C
it includes reversible processes
D
water enters the pump at unsaturated state
Question 108Single Answer
A continuity equation for two dimensional compressible flow is given by
A
B
C
D
Question 109Single Answer
A single stage impulse turbine is also known as :
A
Curtis stage turbine
B
reaction turbine
C
De Laval turbine
D
Rateau turbine
Question 110Single Answer
Which of the following statements is more relevant ?
A
In kinematics of fluid flow, pressure is a vector field
B
In the Largrangian approach, a fluid particle of fixed mass is considered
C
Fluid kinematics deals with the action of the forces in producing or changing motion of fluid
D
In the Eluerian method, control volume approach is not used
Question 111Single Answer
The refrigerant used in the VCR based refrigerant cycle rejects heat in .............
A
the expansion value
B
the evaporator
C
the condenser
D
the compressor
Question 112Single Answer
Select the most appropriate definition of a turbine from the following statement :
A
Turbine is a fluid machine
B
It is device in which kinetic energy held by a fluid is converted to mechanical energy of a rotating member
C
It is a device where potential energy is transferred to a fluid
D
It is a device where mechanical energy from moving parts is transferred to a fluid
Question 113Single Answer
In the context of aircraft refrigeration cycle, what is temperature of air at the exit of cooling turbine in the absence of moisture condensation ?
A
Saturated temperature
B
Dry air rated temperature (DART)
C
Super-saturated temperature
D
Dry air temperature (DAT)
Question 114Single Answer
Fans and blowers of turbo mechines :
A
a higher static pressure will prevail
B
spiral casing decreases the static pressure
C
deliver air at a higher desired velocity
D
deliver air at a lower mass flow rate
Question 115Single Answer
Which of the following characteristics of a centrifugal pump is vital ?
A
Slip will decrease with the increase in flow rater
B
Fluid is considered to have friction while flowing inside the pump
C
Fluid moves normal to the blade
D
There will be no whirl component of velocity at the entry to impeller
Question 116Single Answer
For a single cylinder four-stroke oil engine, indicated power is 15 kW, calorific value of fuel is 40000 kJ/kg and fuel consumed is 0.001 kg/s. What will be the indicated thermal efficiency ?
A
40%
B
37.5%
C
62.5%
D
75%
Question 117Single Answer
In air standard cycle analysis of IC engines, which of the following statements is correct ?
A
Specific heats (Cp, Cv) of air vary with temperature
B
There will be a sudden change in chemical equilibrium of the working fluid
C
There are not intake or exhaust processes
D
Compression and expansion processes are considered as irreversible
Question 118Single Answer
What is a dilatants ?
A
It is a fluid with suspended colour pigments
B
It is a shear thickening fluid
C
It is a fluid that sustains shear stress without any deformation
D
It is a shear thinning fluid
Question 119Single Answer
Boilers in the Rankine cycle are used :
A
to allow expansion of steam
B
to store working fluid
C
for steam generation
D
to maintain heat in the process
Question 120Single Answer
Normal volume generated by the working piston when travelling from one dead centre to the next is called ...........
A
clearance volume
B
swept volume
C
total volume
D
stroke volume
General Ability, Logical Reasoning, Intelligence Test etc
Question 121Single Answer
I go to Madurai by —– Vaigai Express
A
a
B
an
C
some
D
the
Question 122Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 123Single Answer
The payment was collected by the hardworking salesman.
A
The hardworking salesman collected the payment.
B
the salesman who worked heard was able to collect the payment.
C
to collect the payment the salesman had to work hard.
D
The hardworking salesman was able to collect the payment.
Question 124Single Answer
I had to stop all my work to complete this project.
A
All other work had to be stopped to complete this project by me
B
For completing this project all other work must be stopped
C
For completing this project I had to stop all my work
D
To complete this project all other work had been stopped by me
Question 125Single Answer
They have published the names of all the successful candidates.
A
The candidates who have succeeded their names they had published.
B
The names of all the successful candidates have been published by them
C
The candidates who have succeeded their names have been published by them.
D
The names of all the successful candidate were published by them.
Question 126Single Answer
The online shopping site lowered the prices.
A
Lowering of the prices was done by the online shopping site
B
The prices were lowered by the online shopping site
C
The prices had been lowered by the online shopping site
D
The prices have been lowered by the online shopping site
Question 127Single Answer
Who taught you to drive a truck ?
A
To drive a truck by whom were you taught?
B
Driving a truck by who were you taught?
C
Driving a truck by who were you being taught?
D
By whom were you taught to drive a truck?
Question 128Single Answer
We shall invite Suresh.
A
Suresh would be invited by us
B
Suresh would have been invited by us
C
Suresh will be invited by us
D
Suresh will have been invited by us
Question 129Single Answer
Dark clouds have overcast the evening sky.
A
By the dark clouds the evening sky was overcast.
B
The evening sky has been overcast by the dark clouds.
C
Dark clouds overcastted the evening sky.
D
The sky of the evening was overcasted by dark clouds.
Question 130Single Answer
The partners will celebrate their triumph tomorrow.
A
The triumph would be celebrated by the partners a day before
B
The triumph would be celebrated by the partners a day after
C
The triumph would have been celebrated by the partners a day after
D
The triumph will have been celebrated by the partners tomorrow
Question 131Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 132Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 133Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 134Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 135Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 136Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 137Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 138Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 139Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 140Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’ and if no such word can be formed your answer is ‘B’.
A
V
B
T
C
E
D
A
E
B
Question 141Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 142Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 143Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 144Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 145Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 146Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 147Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 148Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 149Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?