A Rajasthan Polytechnic Lecturer mock test from Toppersexam.com is a practice paper based on the latest exam pattern and syllabus, designed to help you assess your preparation level.
Rajasthan Polytechnic Lecturer Free Mock Test
Crack the Rajasthan Polytechnic Lecturer Mock Test 2026 with the help of an online Test series or a free mock test. Every sample paper in the Rajasthan Polytechnic Lecturer Exam has a designated weight, so do not miss out on any paper. Prepare for the Rajasthan Polytechnic Lecturer mock test and check your test scores.
Rajasthan Polytechnic Lecturer Syllabus 2026, Exam Pattern
Rajasthan Polytechnic Lecturer Syllabus 2026, Exam Pattern, Exam Date 2026
Detail Information about Rajasthan has published notification 2026 for the recruitment of Polytechnic Lecturer vacancies. Those Candidates who are Interested to the following vacancy and completed all Eligibility Criteria can read the Notification & Apply Online. In this page we provide the Complete Syllabus of this Recruitment with Latest Update Exam Pattern and the Exam Date also.
Rajasthan Polytechnic Lecturer Syllabus 2026
Concerned Subject (Civil Paper-I) :
A. STRENGTH OF MATERIALS: Behaviour of engineering materials in tension, compression and shear, elastic limit, yield stress, proof stress, nominal stress, actual stress and ultimate stress, factor of safety, load factor and elastic constants. Principal stresses and strains, Strain energy, Theories of elastic failure.
Bending moment and shear force in statically determinate beams, stress due to bending moment and shear force, design of section, section modulus, elementary theory of torsion, combined bending and torsion.
B. SOIL AND FOUNDATION ENGINEERING: Soil Exploration: Methods of site exploration, boring, sampling, standard penetration test. Preliminary definitions and relationship: Water content, unit, weight, specific gravity, void ratio, porosity and degree of saturation, density index, phase relationship.
Index Properties: Specific gravity, particle size distribution, consistency of soils. Classifications of soils, field identification.
Soil water: Inter-granular and pore water pressure, Quick sand phenomenon, permeability, Flow net and its uses.
Consolidation: Concept of one-dimensional consolidation. Laboratory consolidation test, over- consolidated normally consolidated soils, settlement analysis.
Shear Strength: Basic concept, Mohr-Coulomb Failure theory and measurement of shear strength. Earth Pressure: Lateral earth pressures (Active and Passive), Rankine's and Coulomb's theory.
Bearing Capacity: Definitions, Terzaghi's method, general shear and local shear failures, plate load test.
Compaction: Field Compaction method, water content, field compaction control and factors affecting compaction
C. THEORY OF STRUCTURES: Statically Indeterminate Structures: Static and kinematics indeterminacy, Energy theorems, Stiffness and flexibility methods elementary analysis of structures, methods of consistent deformation, slope deflection and moment distribution. Analysis of beams (including continuous) and portal frames, Influence lines, Influence lines for moment, shear and reaction for statically determinate beams and planner trusses.
D. STRUCTURAL DESIGN-I: RCC: Specifications for loads on buildings and bridges. Reinforce cement concrete: Limit state theory, resistance to bending, shear and bond. Design of singly and doubly reinforced beams, one way, two way and flat slabs, columns with axial and uniaxial moment loading, footing, cantilever and counter-fort retaining walls.
E. STRUCTURAL DESIGN-II: Steel Structures: Tension and compression members, single and built up sections, connection and splices, roof trusses, simple beams and Purlin connections, columns, lacing and batten, Grillage, Gusseted and slab base foundation.
Concerned Subject (Civil Paper-II) :
A. FLUID MECHANICS: Fluid properties, types of flow, Fluid statics, forces on fully and partially submerged bodies, stability of floating bodies. Fluid kinematics, acceleration of fluid particle, velocity potential and stream function, irrotational flows, ideal fluid flow, Bernoulli's, Navier Stokes, Reynold's equations, application. Flow measuring devices. Momentum and angular momentum principles as applied to fluid in a control volume, applications to jets. Introduction of viscous flow, concept of drag. Flow through pipes, Laminar and turbulent.
B. SURVEYING: Distance Measurements: Use of steel and metallic tapes, application of corrections, measurement of base line, errors in base line measurements, reduction to mean sea level, specifications for base line measurements, optical measurements of distances, use of substance bars. Angle Measurements: Principles of theodolite constructions, temporary and permanent adjustment, precision in relation to nature of work, compass, varieties, limitations. Traverse adjustments. Vertical Measurements: Use of leveling instruments of level, level tubes, estimation of sensitivity, optics, care and maintenance, parameters to define quality of telescope, leveling instruments and theodolites, methods of records and reducing, stadia reductions, use of level rods, contouring, drainage and watershed
lines.
Methods of filling in details: Chain and compass, plane table and traverse surveys. Principles and adjustments of closed traverse, determination of missing data, solution of two point and three point problems.
C. CONSTRUCTION MATERIALS:
(i) Building Materials: building stones, building bricks, steel (Plain, Tor, Hightensile and Structural), Timber, lime, cement, sand, surkhi, cinder, stone slabs and lintels, aggregates for cement concrete, paints, distempers, use of pozzolana manufacturing of lime concrete, cement concrete for plain, reinforced and pre-stressed concrete work.
(ii) Road Materials: Coarse aggregate, screenings and binding materials for WBM. Bricks for soling. Coarse and fine aggregate for bituminous roads, IRC standard size aggregates, Tars and Asphalt. Asphaltic concrete, Asphaltic emulsions, Mastic Asphalt and Minerals fillers.
(iii) Constructions Stone Masonry: Ashlar, course rubble, random rubble, stone pillar, dry stone and arch masonry Bricks Masonry: Types and their uses, hollow and reinforced brickwork.
Wood work: doors and windows.
Steel works: Structural steel work, metal doors and windows.
Roofing: Stone slab roofing, G.C. Steel sheet roofing, Asbestos cement sheet roofing, jack arch roofing, tile and thatch roofing.
Flooring: Cement concrete flooring, flag stone flooring, terrazzo mosaic flooring, Terrazzo file flooring, Brick on edge flooring, timber Granolithic floor finish, linoleum and other floorings.
Plastering: Lime plaster, cement sand plaster, composite, plaster, rough coat plaster, plastering with Gypsum, Plaster of Paris, painting.
D. HYDROLOGY AND WATER RESOURCES ENGINEERING: Engineering Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration and
infiltration. Estimation of dependable runoff factors effecting runoff. Rainfall runoff relationship, flood/drought estimation using frequency analysis and unit
hydrograph methods. Groundwater hydrology, aquifers, steady flow towards fully penetrating wells confined and unconfined aquifers. Crop water requirements: consumptive use of water. Water depth and frequency of irrigation. Soil moisture and its variation in the root zone. Wilting point. Field capacity. Different methods of irrigation and irrigation efficiency. Duty, delta and outlet factor.
Canals: Lined and unlined canals. Lacey's and Kennedy's theories, Tractive force approach. Types of lining and its selection criteria.
Lift Irrigation from Canals and Wells Ground water availability in unconfined aquifers. Safe yield formulae,
construction and maintenance of wells. Relative merits of lift irrigation and flow irrigation.
E. TRANSPORT AND TRAFFIC ENGINEERING: Survey, investigation and preparation of road project. Highway standard classification, land width, building
line center line, formation width, terrain classification, pavement width, Camber, longitudinal gradients, sight distance, horizontal curve, super elevation, vertical curve, lateral and vertical clearances. Design of Pavement: Flexible pavements. Pavement Construction: Sub-base, base course and shoulder stone/kankar brick soling, WBM courses, shoulders. Granular sub-base, stabilized soil roads, cement/lime stabilized sub-base, sand bitumen base course, crushed cement concrete base/sub-base course.
Bituminous Course: Prime and tack coats, surface dressing, open graded premix carpet, semi dense carpet, built-up spray grout base course, bituminous base binder course. Asphaltic concrete seal coats, mixed seal surfacing. Penetration macadam base/binder course, full and semi grouts. Traffic Engineering: Traffic characteristics, road user characteristics, vehicular characteristics, volume, speed and delay studies origin and destination study, traffic flow characteristics, traffic capacity and parking studies, traffic regulation, traffic control devices, Intersection control. System approach in traffic management.
F. WATER AND WASTE WATER ENGINEERING:
Water Engineering: Quantitative requirements of water supply for urban and rural areas. Variation in demand. Forecast of population. Drinking water standard for
water. Analysis of water quality. Water treatment, sedimentation, coagulation, filtration and disinfection, water softening and aeration of water. Water
distribution system and their design and analysis.
Waste water Engineering: Characterization of Sewage; Physical, chemical and biological analysis, self purification of streams. Sewage treatment, Physical treatment, screening, skimming tanks, Grit chamber, settling tanks. Secondary (biological) treatment, trickling filters and high rate bio filters. Activated sludge and accelerated aeration plants. Secondary, settling tanks, sludge digesters and sludge drying. Final disposal, Low cost waste water treatment oxidation ponds, oxidation ditches, aerated lagoons, septic tank, anaerobic lagoons. Dry refuse disposal.
General Studies of Rajasthan :
History, Art, Culture, Literature and Heritage of Rajasthan :
1. Ancient Civilizations of Rajasthan with special reference to Mesolithic (Late Stone Age) sites in Rajasthan i.e. Nimbahera, Bagor and Mandia.
2. Major dynasties of Rajasthan and its rulers through the Ages and their cultural achievements (1000-1800 A.D.).
3. Political resistance of Rajput Rulers against Muslim Power. Special reference to Rattan Singh, Hammir, Kanhad dev and Maldev, Chandrasen and Pratap.
4. (i) Bhakti Movement and Sufism in Medieval Rajasthan special reference to Mira, Dadu and Khawaja Moin-ud-din Chishty. Saints: Special emphasis to be paid to teachings of Ramdevji, Gogaji, Tejaji, Pabuji, Mallinath, Dhanna, Pipa, Haridas, Raidas, Jasnath and Sects.
(ii) Folk Gods and Goddesses.
5. Political Awakening and Freedom Movement in Rajasthan: 1857, Peasant and Tribal Movements, Prajamandal Movements, Contribution of Women in Social and Political awakening.
6. (i) Folk Culture: Fairs and Festivals, Different Schools of Painting, Folk Tales and Gathas, Folk Songs, Folk Dances, Folk Music and Instruments.
(ii) Dress and Ornaments, Handicrafts.
7. Rajasthani Language: Origin and Development.
8. Main Dialects and Region.
9. Rajasthani Scripts: Mudia and Devnagari.
10. (a) Rajasthani Literature: Its Evolution.
(i) Early Period
(ii) Pre-Medieval Period
(iii) Post- Medieval Period
(iv) Modern Period.
(b) Famous Writers and their Works.
11. Tourism and Rajasthan: Heritage, Tourism Policy and Vision.
Geography of Rajasthan :
1. Physiographic Regions, Rivers and Lakes.
2. Climate, Natural Vegetation, Soil, Minerals and Energy Resources – Renewable and Non-renewable.
3. Population– Characteristics, Livestock, Biodiversity and its Conservation.
4. Production and Distribution of Major Crops, Major Irrigation Projects, Major Industries
5. Drought and Famines, Desertification, Environmental Problems, Disaster Management and Pandemics.
Political and Administrative System of Rajasthan :
1. Governor, Chief Minister and Council of Ministers.
2. State Legislative Assembly, High Court and Judicial System of
Rajasthan.
3. Rajasthan Public Service Commission, State Election Commission, State
Finance Commission, State Human Rights Commission, State
Commission for Women, State Information Commission, Lokayukta and
Auditor General.
4. Chief Secretary, Government Secretariat, Chief Minister’s Office (CMO),
Divisional Commissioner, District Administration, Institutions of
Panchayati Raj and Urban Local- Self Government.
5. Government Policies and Right based Citizenship: Right to Information,
Guaranteed Delivery of Public Services, Citizen's Charters, Social Audit,
Jan Soochna Portal, Rajasthan Sampark Portal etc.
Economy of Rajasthan :
1. Characteristics of state economy.
2. Occupational Distribution.
3. Compositional trend of State Domestic Product.
4. Major Sectoral Issues.
(i) Agricultural Sector: Characteristics of agricultural sector in Rajasthan. Major Rabi and Kharif crops with special reference to oil seeds and spices. Irrigated area and trends, Problems of migrant workers and their rehabilitation. Agricultural credit.
(ii) Livestock: Trends in livestock population. Milk production in Rajasthan.
(iii) Industrial Outlook: Major industries of Rajasthan. Constraints to development of industries. MSMEs in Rajasthan. Roles and problem of small industries. Industrial sickness. Major state public sector enterprises. SEZ in Rajasthan. Role of RIICO and RFC. Agro-Processing Policy (2020).
(iv) Service Sector: Primary education, Development in recent years. Health programmes of state government. Mid-Day Meal Programme. Indira Rasoi Yojna.
(v) Infrastructure Development: Progress in national highways, state highways and village roads. Power: Progress in power generation. Recent progress in solar power projects.
(vi) Handicrafts of Rajasthan.
(vii) Major items of exports from Rajasthan.
(viii) Major welfare schemes of state government for economically and socially backward classes, disabled people, old-aged people. Steps taken for women empowerment and child development.
(ix) Regional economic inequalities in Rajasthan.
Contemporary Events :
1. Major Contemporary Events and Issues of Rajasthan.
2. Persons and Places in News.
3. Sports and Games.
Rajasthan Polytechnic Lecturer Syllabus 2026
Concerned Subject (Civil Paper-I) :
A. STRENGTH OF MATERIALS: Behaviour of engineering materials in tension, compression and shear, elastic limit, yield stress, proof stress, nominal stress, actual stress and ultimate stress, factor of safety, load factor and elastic constants. Principal stresses and strains, Strain energy, Theories of elastic failure.
Bending moment and shear force in statically determinate beams, stress due to bending moment and shear force, design of section, section modulus, elementary theory of torsion, combined bending and torsion.
B. SOIL AND FOUNDATION ENGINEERING: Soil Exploration: Methods of site exploration, boring, sampling, standard penetration test. Preliminary definitions and relationship: Water content, unit, weight, specific gravity, void ratio, porosity and degree of saturation, density index, phase relationship.
Index Properties: Specific gravity, particle size distribution, consistency of soils. Classifications of soils, field identification.
Soil water: Inter-granular and pore water pressure, Quick sand phenomenon, permeability, Flow net and its uses.
Consolidation: Concept of one-dimensional consolidation. Laboratory consolidation test, over- consolidated normally consolidated soils, settlement analysis.
Shear Strength: Basic concept, Mohr-Coulomb Failure theory and measurement of shear strength. Earth Pressure: Lateral earth pressures (Active and Passive), Rankine's and Coulomb's theory.
Bearing Capacity: Definitions, Terzaghi's method, general shear and local shear failures, plate load test.
Compaction: Field Compaction method, water content, field compaction control and factors affecting compaction
C. THEORY OF STRUCTURES: Statically Indeterminate Structures: Static and kinematics indeterminacy, Energy theorems, Stiffness and flexibility methods elementary analysis of structures, methods of consistent deformation, slope deflection and moment distribution. Analysis of beams (including continuous) and portal frames, Influence lines, Influence lines for moment, shear and reaction for statically determinate beams and planner trusses.
D. STRUCTURAL DESIGN-I: RCC: Specifications for loads on buildings and bridges. Reinforce cement concrete: Limit state theory, resistance to bending, shear and bond. Design of singly and doubly reinforced beams, one way, two way and flat slabs, columns with axial and uniaxial moment loading, footing, cantilever and counter-fort retaining walls.
E. STRUCTURAL DESIGN-II: Steel Structures: Tension and compression members, single and built up sections, connection and splices, roof trusses, simple beams and Purlin connections, columns, lacing and batten, Grillage, Gusseted and slab base foundation.
Concerned Subject (Civil Paper-II) :
A. FLUID MECHANICS: Fluid properties, types of flow, Fluid statics, forces on fully and partially submerged bodies, stability of floating bodies. Fluid kinematics, acceleration of fluid particle, velocity potential and stream function, irrotational flows, ideal fluid flow, Bernoulli's, Navier Stokes, Reynold's equations, application. Flow measuring devices. Momentum and angular momentum principles as applied to fluid in a control volume, applications to jets. Introduction of viscous flow, concept of drag. Flow through pipes, Laminar and turbulent.
B. SURVEYING: Distance Measurements: Use of steel and metallic tapes, application of corrections, measurement of base line, errors in base line measurements, reduction to mean sea level, specifications for base line measurements, optical measurements of distances, use of substance bars. Angle Measurements: Principles of theodolite constructions, temporary and permanent adjustment, precision in relation to nature of work, compass, varieties, limitations. Traverse adjustments. Vertical Measurements: Use of leveling instruments of level, level tubes, estimation of sensitivity, optics, care and maintenance, parameters to define quality of telescope, leveling instruments and theodolites, methods of records and reducing, stadia reductions, use of level rods, contouring, drainage and watershed
lines.
Methods of filling in details: Chain and compass, plane table and traverse surveys. Principles and adjustments of closed traverse, determination of missing data, solution of two point and three point problems.
C. CONSTRUCTION MATERIALS:
(i) Building Materials: building stones, building bricks, steel (Plain, Tor, Hightensile and Structural), Timber, lime, cement, sand, surkhi, cinder, stone slabs and lintels, aggregates for cement concrete, paints, distempers, use of pozzolana manufacturing of lime concrete, cement concrete for plain, reinforced and pre-stressed concrete work.
(ii) Road Materials: Coarse aggregate, screenings and binding materials for WBM. Bricks for soling. Coarse and fine aggregate for bituminous roads, IRC standard size aggregates, Tars and Asphalt. Asphaltic concrete, Asphaltic emulsions, Mastic Asphalt and Minerals fillers.
(iii) Constructions Stone Masonry: Ashlar, course rubble, random rubble, stone pillar, dry stone and arch masonry Bricks Masonry: Types and their uses, hollow and reinforced brickwork.
Wood work: doors and windows.
Steel works: Structural steel work, metal doors and windows.
Roofing: Stone slab roofing, G.C. Steel sheet roofing, Asbestos cement sheet roofing, jack arch roofing, tile and thatch roofing.
Flooring: Cement concrete flooring, flag stone flooring, terrazzo mosaic flooring, Terrazzo file flooring, Brick on edge flooring, timber Granolithic floor finish, linoleum and other floorings.
Plastering: Lime plaster, cement sand plaster, composite, plaster, rough coat plaster, plastering with Gypsum, Plaster of Paris, painting.
D. HYDROLOGY AND WATER RESOURCES ENGINEERING: Engineering Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration and
infiltration. Estimation of dependable runoff factors effecting runoff. Rainfall runoff relationship, flood/drought estimation using frequency analysis and unit
hydrograph methods. Groundwater hydrology, aquifers, steady flow towards fully penetrating wells confined and unconfined aquifers. Crop water requirements: consumptive use of water. Water depth and frequency of irrigation. Soil moisture and its variation in the root zone. Wilting point. Field capacity. Different methods of irrigation and irrigation efficiency. Duty, delta and outlet factor.
Canals: Lined and unlined canals. Lacey's and Kennedy's theories, Tractive force approach. Types of lining and its selection criteria.
Lift Irrigation from Canals and Wells Ground water availability in unconfined aquifers. Safe yield formulae,
construction and maintenance of wells. Relative merits of lift irrigation and flow irrigation.
E. TRANSPORT AND TRAFFIC ENGINEERING: Survey, investigation and preparation of road project. Highway standard classification, land width, building
line center line, formation width, terrain classification, pavement width, Camber, longitudinal gradients, sight distance, horizontal curve, super elevation, vertical curve, lateral and vertical clearances. Design of Pavement: Flexible pavements. Pavement Construction: Sub-base, base course and shoulder stone/kankar brick soling, WBM courses, shoulders. Granular sub-base, stabilized soil roads, cement/lime stabilized sub-base, sand bitumen base course, crushed cement concrete base/sub-base course.
Bituminous Course: Prime and tack coats, surface dressing, open graded premix carpet, semi dense carpet, built-up spray grout base course, bituminous base binder course. Asphaltic concrete seal coats, mixed seal surfacing. Penetration macadam base/binder course, full and semi grouts. Traffic Engineering: Traffic characteristics, road user characteristics, vehicular characteristics, volume, speed and delay studies origin and destination study, traffic flow characteristics, traffic capacity and parking studies, traffic regulation, traffic control devices, Intersection control. System approach in traffic management.
F. WATER AND WASTE WATER ENGINEERING:
Water Engineering: Quantitative requirements of water supply for urban and rural areas. Variation in demand. Forecast of population. Drinking water standard for
water. Analysis of water quality. Water treatment, sedimentation, coagulation, filtration and disinfection, water softening and aeration of water. Water
distribution system and their design and analysis.
Waste water Engineering: Characterization of Sewage; Physical, chemical and biological analysis, self purification of streams. Sewage treatment, Physical treatment, screening, skimming tanks, Grit chamber, settling tanks. Secondary (biological) treatment, trickling filters and high rate bio filters. Activated sludge and accelerated aeration plants. Secondary, settling tanks, sludge digesters and sludge drying. Final disposal, Low cost waste water treatment oxidation ponds, oxidation ditches, aerated lagoons, septic tank, anaerobic lagoons. Dry refuse disposal.
General Studies of Rajasthan :
History, Art, Culture, Literature and Heritage of Rajasthan :
1. Ancient Civilizations of Rajasthan with special reference to Mesolithic (Late Stone Age) sites in Rajasthan i.e. Nimbahera, Bagor and Mandia.
2. Major dynasties of Rajasthan and its rulers through the Ages and their cultural achievements (1000-1800 A.D.).
3. Political resistance of Rajput Rulers against Muslim Power. Special reference to Rattan Singh, Hammir, Kanhad dev and Maldev, Chandrasen and Pratap.
4. (i) Bhakti Movement and Sufism in Medieval Rajasthan special reference to Mira, Dadu and Khawaja Moin-ud-din Chishty. Saints: Special emphasis to be paid to teachings of Ramdevji, Gogaji, Tejaji, Pabuji, Mallinath, Dhanna, Pipa, Haridas, Raidas, Jasnath and Sects.
(ii) Folk Gods and Goddesses.
5. Political Awakening and Freedom Movement in Rajasthan: 1857, Peasant and Tribal Movements, Prajamandal Movements, Contribution of Women in Social and Political awakening.
6. (i) Folk Culture: Fairs and Festivals, Different Schools of Painting, Folk Tales and Gathas, Folk Songs, Folk Dances, Folk Music and Instruments.
(ii) Dress and Ornaments, Handicrafts.
7. Rajasthani Language: Origin and Development.
8. Main Dialects and Region.
9. Rajasthani Scripts: Mudia and Devnagari.
10. (a) Rajasthani Literature: Its Evolution.
(i) Early Period
(ii) Pre-Medieval Period
(iii) Post- Medieval Period
(iv) Modern Period.
(b) Famous Writers and their Works.
11. Tourism and Rajasthan: Heritage, Tourism Policy and Vision.
Geography of Rajasthan :
1. Physiographic Regions, Rivers and Lakes.
2. Climate, Natural Vegetation, Soil, Minerals and Energy Resources – Renewable and Non-renewable.
3. Population– Characteristics, Livestock, Biodiversity and its Conservation.
4. Production and Distribution of Major Crops, Major Irrigation Projects, Major Industries
5. Drought and Famines, Desertification, Environmental Problems, Disaster Management and Pandemics.
Political and Administrative System of Rajasthan :
1. Governor, Chief Minister and Council of Ministers.
2. State Legislative Assembly, High Court and Judicial System of
Rajasthan.
3. Rajasthan Public Service Commission, State Election Commission, State
Finance Commission, State Human Rights Commission, State
Commission for Women, State Information Commission, Lokayukta and
Auditor General.
4. Chief Secretary, Government Secretariat, Chief Minister’s Office (CMO),
Divisional Commissioner, District Administration, Institutions of
Panchayati Raj and Urban Local- Self Government.
5. Government Policies and Right based Citizenship: Right to Information,
Guaranteed Delivery of Public Services, Citizen's Charters, Social Audit,
Jan Soochna Portal, Rajasthan Sampark Portal etc.
Economy of Rajasthan :
1. Characteristics of state economy.
2. Occupational Distribution.
3. Compositional trend of State Domestic Product.
4. Major Sectoral Issues.
(i) Agricultural Sector: Characteristics of agricultural sector in Rajasthan. Major Rabi and Kharif crops with special reference to oil seeds and spices. Irrigated area and trends, Problems of migrant workers and their rehabilitation. Agricultural credit.
(ii) Livestock: Trends in livestock population. Milk production in Rajasthan.
(iii) Industrial Outlook: Major industries of Rajasthan. Constraints to development of industries. MSMEs in Rajasthan. Roles and problem of small industries. Industrial sickness. Major state public sector enterprises. SEZ in Rajasthan. Role of RIICO and RFC. Agro-Processing Policy (2020).
(iv) Service Sector: Primary education, Development in recent years. Health programmes of state government. Mid-Day Meal Programme. Indira Rasoi Yojna.
(v) Infrastructure Development: Progress in national highways, state highways and village roads. Power: Progress in power generation. Recent progress in solar power projects.
(vi) Handicrafts of Rajasthan.
(vii) Major items of exports from Rajasthan.
(viii) Major welfare schemes of state government for economically and socially backward classes, disabled people, old-aged people. Steps taken for women empowerment and child development.
(ix) Regional economic inequalities in Rajasthan.
Contemporary Events :
1. Major Contemporary Events and Issues of Rajasthan.
2. Persons and Places in News.
3. Sports and Games.
Rajasthan Polytechnic Lecturer Exam Pattern 2026
Negative Marking : 0.33
| Paper | Subject | No.of Question | Marks | Duration |
| Paper 1 | Concerned Subject (Civil) | 150 | 75 | 3 Hour |
| Paper 2 | Concerned Subject (Civil) | 150 | 75 | 3 Hour |
| Paper 3 | General Studies of Rajasthan | 100 | 50 | 2 Hour |
Exam Date 2026 : Notified Soon
Starting & Last Date of Application Form : April 2026 (Expected)
Total Post : 442
Rajasthan Polytechnic Lecturer Exam Free Online Test Series
Crack Rajasthan Polytechnic Lecturer Mock Test 2026 with the help of Online Test Series or Free Mock Test. Every Sample Paper in Rajasthan Technical Education Department Exam has a designated weightage so do not miss out any Paper. Preprare for Rajasthan Polytechnic Lecturer Mock Test and check your test scores.
2
Rajasthan Polytechnic Lecturer Exam Paper I - English150 questions • 180 mins • 75 marks
Free Test →4
Rajasthan Polytechnic Lecturer Exam Paper II - English150 questions • 180 mins • 75 marks
Free Test →Rajasthan Polytechnic Lecturer Exam Free Online Question Bank
Rajasthan Polytechnic Lecturer question answer with solutions are available in Hindi & English. Join MCQ, Important Questions, Question Bank, questions and answers for Free Rajasthan Polytechnic Lecturer exam preparation.
1
Rajasthan Polytechnic Lecturer Exam Paper I - English150 questions • 180 mins • 75 marks
Free Questions →2
Rajasthan Polytechnic Lecturer Exam Paper I - Hindi150 questions • 180 mins • 75 marks
Free Questions →3
Rajasthan Polytechnic Lecturer Exam Paper II - English150 questions • 180 mins • 75 marks
Free Questions →4
Rajasthan Polytechnic Lecturer Exam Paper II - Hindi150 questions • 180 mins • 75 marks
Free Questions →FAQs
Rajasthan Polytechnic Lecturer 2026 Free Mock Test Frequently Asked Questions (FAQ's)
You can find and practice free mock tests for the Rajasthan Polytechnic Lecturer exam on the Toppersexam.com portal.
Mock tests are very powerful tool for exam preparation. They help students develop confidence, manage time effectively and improves accuracy to prepare better for Rajasthan Polytechnic Lecturer.
You can find a free online mock test for the Rajasthan Polytechnic Lecturer on toppersexam.com. By taking frequent online mock tests students can monitor there progress and create a study plan according to the needs.
You can take mock test online for Rajasthan Polytechnic Lecturer to know the CBT (computer based test) format of the main exam. You will get latest exam pattern, updated syllabus and type of questions asked in the actual exam.
Mock tests are practice exams to prepare the students for the final one. Taking mock test regularly helps students to improve time management skills and boost confidence.
Students can find a free mock test for Rajasthan Polytechnic Lecturer only at toppersexam. Get free online mock test to experience the actual exam format is important to reduce anxiety and improves your confidence.
Advantages of online mock tests are immediate results, accessibility and time management. Sample papers and mock tests are remarkable tools to track students performance and change your study plan according to your weakness.
Free online mock test can improve your score by making you exam ready before the final exam. It is a excellent way to know the exam pattern and identify your weakness for the Rajasthan Polytechnic Lecturer.
Toppersexam free online mock test are designed by subject experts to provide the best preparation for Rajasthan Polytechnic Lecturer. The questions asked are exactly like the ones which are asked in the actual exam.
Students should practice more and more online mock test for Rajasthan Polytechnic Lecturer to evaluate their performance, detect weaknesses, and improve time management without any cost.
Current affairs and general knowledge mock test are important ways to increase knowledge to stay updated about the recent news and events. Regular practicing with current affairs mock test helps students to prepare better for general awareness section for the final exam.
User Reviews